Jump to content

Recommended Posts

Posted (edited)

Nearly $70k for my new 2019 GMC AT4, and NO LOCKING GAS CAP!?!?!? WTH?!?! My 15 C7 Vette has a proximity latch that pops right open when you're at the pump. I've rented subcompacts with this feature, so please explain Why In The Heck didn't GM put one on either their 2018 Chevy or 2019 GMC trucks. 

 Does anyone have a line on an aftermarket fix? I'm considering pulling one out of a wrecked Vette or something. 

AT4 Fuel Door III.jpg

Edited by BigEdB
Add Pic.
  • 9 months later...
Posted

Dear Chevrolet: I am a little disappointed that the 2020 3500 HD w/6.6L Diesel engine that I have on order will not come with what I consider to be a mandatory safety feature! Namely a locking fuel door! Besides leaving the fuel filler accessible to anyone with a finger, the fact that the DEF filler is also located in the same unsecured location is totally unacceptable. Given the havoc that can be wreaked by persons wanting to add damaging fluids to either one of the filler spouts, I just find this Foolish & ridiculous!

  • 4 weeks later...
Posted

We had a brief crime spree here in Edmonton, of thieves being real a-holes and drilling holes in the gas tank to steal fuel last fall/early winter...

 

Couldn't have been the smartest guys, as it's not unusual for battery powered drills to have some sparking internally as they operate, and with them getting a regular bath in gasoline...

Posted

Up here in AK they just drilled holes through the bottom of the tanks also.  I don't want to be fumbling with my keys around the gas cap anyway, the price is pain full enough

Posted
On 4/10/2019 at 12:42 AM, BigEdB said:

Nearly $70k for my new 2019 GMC AT4, and NO LOCKING GAS CAP!?!?!? WTH?!?! My 15 C7 Vette has a proximity latch that pops right open when you're at the pump. I've rented subcompacts with this feature, so please explain Why In The Heck didn't GM put one on either their 2018 Chevy or 2019 GMC trucks. 

 Does anyone have a line on an aftermarket fix? I'm considering pulling one out of a wrecked Vette or something. 

 

 

Uh.....Because it has a CAPLESS fuel fill system?

 

Feel free to try the locking cap that GM sells if you want, but its 2017-2019.  Not sure if it fits the 2020 filler.  P/N is 84308352

Posted
1 hour ago, MORSNO said:

Up here in AK they just drilled holes through the bottom of the tanks also.  I don't want to be fumbling with my keys around the gas cap anyway, the price is pain full enough

I hear ya, in Oregon we by law can’t pump our own gas, so it would be a PITA - although if it isn’t the looters through the fill/cap (if they just drill the tank) it will be the stupid kids with nothing else to do filling with sugar or something else.  It’s just a deterrent for idiots, we all know full well is someone really wants something they’ll get it.  I just don’t want to be the easiest target on the block, with a 40 gallon tank to boot. 

  • 4 weeks later...
  • 7 months later...
Posted (edited)

I ran across this thread and I am like a few people, capless fuel is fine, but really no basic locking mechanism for the fuel door. All it would have taken was for GM to install a solenoid locking system in conjunction with the door lock and unlock circuit to make it happen. So, without a major design and mod for a locking fuel door here is what I came up with. If you like it or dislike it, it doesn't matter to me. My OCD is now relaxed knowing the fuel door is locked. The parts you need will be a JR Products 00175 Compartment Door Key Lock - 1-1/8", $11.87 on amazon, a 2" FERNCO rubber cap from Home Depot to keep the dust out and finally a 70K GMC Sierra Denali, local dealer. Oh, the locking cap GM sells is junk, since it is easily removable by flexing the housing and it pops right off. 

 

Another thing, the door facia or applique comes off very easily by lifting the tab, it comes off with a little force without moving the tab, it is 92.00 part from GM un painted, the hinge mechanism and well is 20.00 from GM. If I was one of those neighbors I can add a collection of fuel doors already painted and ready to go for EBAY. 

 

Installing the cam lock as gaudy as it may look for some, it actually secures the door to the hinge assembly. You would have to remove the lock to remove the door.

 

 

20201004_183927.thumb.jpg.9cfb321bcca976f00c6a1effb5088436.jpg20201004_183717.thumb.jpg.652df071f1220495e4a00dfc740d7789.jpg20201004_183653.jpg.5f996076be3f314425e2d8d4a4420c3b.jpg20201004_183615.jpg.e46926ec5d91c74ee5bb9c254a15092e.jpg20201004_183736.thumb.jpg.40316819de02df6f148f515f4449c786.jpg

 

20201004_183807.jpg

Edited by AsianCajun
Posted

Gas thieves is not my worry.  I have had a previous truck vandalized and things poured into the gas tank.  Luckily I discovered it before actually driving it and was since they slit the tires my insurance claim covered everything including the fuel tanks.  This did not happen at home where it is garage kept.

 

People are pricks and it could happen even at work or while shopping.  Every few years I hear of a string of car vandals happening, usually teenagers, and putting sugar or something similar into gas tanks is one of the common things they do.

 

 

  • Like 1
  • 6 months later...
Posted

Just bought me a 2021 Sierra 1500 and would like a locking fuel door but no one has one. Had one for my 17 sierra. And like other people said not concerned thieves it the vandalism 

  • 3 weeks later...
Posted
On 10/8/2020 at 9:49 AM, needfulgolfer said:

Perhaps a better investment would be a garage or a house in a ZIP code that doesn't regularly see fuel thieves? I have never met anyone with a locking gas door before.  This seems silly.

My 2020 Kia has a locking gas door.  If the car doors are locked so is the fuel door.  Car doors unlocked so is the fuel door.  

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • I don't wanna do major surgery/upgrades, behind-the-dash work, add amps, change radio etc. on my '26 std cab WT. On the WT, it has the base 7" IOR infotainment setup, and only two speakers (doors). Since I listen to classical, looked around for speakers that do well and dug thru reviews. Two-way speakers were found to be better than 3-way. So I've ordered a pair of  Infinity Reference REF-9632IX 2 way speakers.  [These may  or may not have been discontinued / succeeded by the 3-way ...9633 ones.]    These speakers are lauded for 3 ohm and 94db sensitivity spec so they'll work well for ordinary base car radios without amps and offer better performance (quality,  strength) than  default base paper-cone speakers. They'll be installed in a few days and I'll let y'all know what I think. Bill W San Jose      
    • Thanks!   Changed out the rear shocks today to Bilstein 5100s.  So far feel much better. The stock Rancho were wore out.  Lots of heavy hauling (2 moves, home renovations, etc).  Next up is new BFG tires Monday.  Cant wait the current tires have little to no wet traction and are super loud (hum)    
    • Ok, I got the all the codes. What do you all think would be a place to start?
    • How about I just point to the factory pans stand pipe little drain plug and claim its a pan with a real drain plug !. I just couldn't swallow the fact that a Dorman pan which at this point is probably the only pan out there that fits the gas version truck cost that much up here in Canada so I decided initially anyway to skip it and see what I thought of pulling the pan method and down the road if I felt inclined enough then I would either install a drain plug kit in the factory pan if there is enough room for it, or have a bung welded onto it, or put an aftermarket pan on. The thing is if the pan is not pulled then the magnets in the pan can't be inspected and cleaned or if wanting to change out the filter. However of course it certainly would make the job easier to be able to drop the oil first before having to handle the pan if dropping the pan that go around was the goal.    I knew a guy locally that was doing custom field spraying years ago with a pickup pulling a ground driven sprayer, I believe it was a GM pickup with an automatic trans. He had a drain plug in his pan and would drop the oil out of it once a week and top it back up through the dipstick tube to keep refreshing a portion of the oil often and that made the transmission last far longer than had he done nothing. Soft fields pulling 500 gallons of water at the start of each mixed up sprayer tank batch and in low range sucking along. I imagine he got some tips from other custom sprayer outfits doing the same thing at the time and learning from their blown up tranny mistakes. Transmissions then had no lock up converter so would cook the crap out of the fluid slipping that much and it would not have been synthetic fluid either. 
    • 3.39 Kroger’s in Montgomery Texas. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...