Jump to content

SD Card Removed Nav error?

Tritipnbeer
 Share

Recommended Posts

TripleBGM Enthusiast

TripleBGM

Posted
Posted
On 6/18/2019 at 7:44 AM, TripleBGM said:

I tried that, nothing.  I took it to the dealer, they had to order a new SD card reader.  Hopefully that does the trick.

The dealer replaced the SD card reader today, it seems to work fine now.  We'll see if it last.....

  • 1 month later...
  • Replies 58
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

dbs600
dbs600

Any updates on this anyone?   I'm still having the difficulty with this.   Now on Version 807.   Thanks.

bryn0727
bryn0727

Evidently the SD card must be "Ejected Properly" here's a link explaining what's going on and how to fix it...     https://gm-techlink.com/?p=13677  

Todd Ryburn Enthusiast

Todd Ryburn

Posted
Posted (edited)

I know this topic is a month old, but my AT4 that I've had a week did the "no navigation/SD Card Remove"thing tonight.  It was working and then stopped in route.  On the way back, after the truck being off for maybe 5 minutes it worked fine.  Hopefully, this issue doesn't continue.  Everything else has been great, including the navigation when it works.  

 

I was wondering if anyone else is still having this issue or if they have fixed the problem for the most part.

 

Edited by Todd Ryburn
Todd Ryburn Enthusiast

Todd Ryburn

Posted
Posted

Thanks, I haven't had any issues since, hopefully it was fluke.  I installed a console lockbox earlier that day perhaps I jarred something.  

Todd Ryburn Enthusiast

Todd Ryburn

Posted
Posted

Well it happened again, the navigation wouldn't work, with the message that the SD card had been removed.  Also as someone else mentioned the USB ports (all four in front) stopped working.  This all occurred on start up this time, last time it was while I was driving.  

 

I drove down the block and back and turned the truck off.  Waited a minute and turned it back on and everything, navigation and usb worked fine.  I'll call the dealer on Monday and see what they say.  Hopefully this isn't one of those things that is hard to trace.  With the USB charges not working, it appears to be more serious than just the SD card needing to be replaced.  

  • 2 weeks later...
Fhernny New Member

Fhernny

Posted
Posted

My AT4 is doing the same thing with the card error but I have also noticed that the entire media unit is inoperable. The USB ports and aux jacks are not working either. The entire media port is defective. Need to contact the dealer to fix I only have 400 miles on it! 

  • 3 months later...
AndrewSmith21 Enthusiast

AndrewSmith21

Posted
Posted
On 5/17/2019 at 8:24 AM, TBL569 said:

Brought mine in for this issue about two months ago.  In the end, the dealer replaced the card, card reader, whole radio unit, and the USB/USB-c plug under the radio.  They managed to finally fix it but it took two weeks for ordering various parts and stuff.  Just for fun I asked what they do if all this didn't work.  They said they still had one more option which would be to put in a new wiring harness.  Luckily, they didn't have to do that.... yet.  No problems now for two weeks now.

Been having this issue still wondering if your problem has been completely fixed???? Or if you still have trouble with yours? 

TBL569 Enthusiast

TBL569

Posted
Posted
3 hours ago, AndrewSmith21 said:

Been having this issue still wondering if your problem has been completely fixed???? Or if you still have trouble with yours? 

Ever since they replaced that usb-c plug under the radio it has work fine ever since.  I believe there should be a tsb on it.  Time to schedule your appointment!

HONDABBQ Enthusiast

HONDABBQ

Posted
Posted

Just had this happen to me when i turned the truck on today to go to work. 

 

I reseated the SD card. Nothing. 

 

Stopped on the side of the road and turned off the truck for 30 seconds. Nothing still. 

 

I got to work and went back out 30 minutes later. It restarted the truck and it booted up. Although it took about 3 times as long to do so but it did it. 

 

We will see how it continues going forward. 

AndrewSmith21 Enthusiast

AndrewSmith21

Posted
Posted
10 hours ago, HONDABBQ said:

Just had this happen to me when i turned the truck on today to go to work. 

 

I reseated the SD card. Nothing. 

 

Stopped on the side of the road and turned off the truck for 30 seconds. Nothing still. 

 

I got to work and went back out 30 minutes later. It restarted the truck and it booted up. Although it took about 3 times as long to do so but it did it. 

 

We will see how it continues going forward. 

I would call Chevy and complain everyone needs too! They don't take it serious enough. They replaced the charging cord today and it did it again after it was turned off for a few minutes. 

  • 3 weeks later...
Dnt Senior Enthusiast

Dnt

Posted
Posted

Very strange the fix for mine was to pull the SD card and slide the side tab to the UNLOCKED position. Previous posters said it should be in the LOCKED position? Only had the truck a few days so not sure if it is really fixed or not...........  

Rich MN New Member

Rich MN

Posted
Posted (edited)

Same thing on my 2019 with 800 miles on it. GMC needs some quality controls at the plant. Now I remember why I have been driving Lexus for ten years -never a problem. 
 

dealer said that they will order a new card reader but don’t think that’s the problem. I guess I don’t have nav in my $70k vehicle why they try to figure out what their problem is. 
 

**update: flipped the switch on the card and now it works. Not going to tell the dealer just in case but Nav is working again now

Edited by Rich MN
Update
bamorris2 Enthusiast

bamorris2

Posted
Posted
Same thing on my 2019 with 800 miles on it. GMC needs some quality controls at the plant. Now I remember why I have been driving Lexus for ten years -never a problem. 
 
dealer said that they will order a new card reader but don’t think that’s the problem. I guess I don’t have nav in my $70k vehicle why they try to figure out what their problem is. 
 
**update: flipped the switch on the card and now it works. Not going to tell the dealer just in case but Nav is working again now

Did you lock or unlock the card?
Jwd111 New Member

Jwd111

Posted
Posted
On 5/16/2019 at 3:28 PM, Opiedeegs said:

I’m getting the error message every day now I’ll have to bring it into the dealer
Both usb ports nothing also aux nothing
The hole module is shot or unplugged,loose


Sent from my iPhone using Tapatalk

Mine has been at shop for three days, 500 miles. Dealer is supposedly replacing reader. Not happy

Gav New Member

Gav

Posted
Posted

I have had my truck in 4 times for the sd card error.   They replaced the card, reader, checked connections, and just did software update.   Guess I have to wait and see 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • davester
      Bench seat swap for 2021-2024 suburban

      By davester · Posted

      probably won't get a response from that user, as they haven't returned to the site since making that one post.  users don't (at least I don't, and I haven't seen any setting which would notify me via say, email) get any notification other than going to this site, and checking if they got a response on their thread...
    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      Thanks - I wasn't quite caffeinated this morning. 2:1 makes sense, turning the crankshaft 360 degrees will turn the cam 180 degrees, and had I done that, the cam's dot would be at 6 and the crank's at 12 again.   I went ahead and took the sprocket off anyway, aligned everything dot-to-dot including the balance shaft just for s&g. I'm glad I did because I discovered no Loctite on the timing sprocket bolts. Maybe it's not required, but at only 20 ft-lb torque spec, those bolts aren't in there very tight. Cleaned and reassembled with some thread locker and torqued.   A general observation: Less is more with RTV. If a little doesn't stop a leak, a LOT probably won't, either. RTV is thinly veiled revenge, in a tube...      
    • richard wysong
      Wow I'm in a pickle. (Broke down truck) and a story.

      By richard wysong · Posted

      The timing marks are ok, that is #1, you can turn it over until they line up and it won't change anything, the crankshaft turns twice for every camshaft revolution, I have always set up SB Chevs as your pic shows using a straight edge
    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      Someone's been here before.... There is a receipt for a 3-piece timing set, purchased earlier this year.   Is this picture something, or, nothing?   I have the timing cover off and my crank is perfectly TDC and the keyed gear's locating mark is dead on 12 o'clock.   The cam gear locating mark is also at 12 o'clock. Now, I'm not an expert, but all the install guides say the two locating marks should meet and be perfectly aligned when installing a timing set. The mark on the crank should be dead on 12:00 and the cam gear's mark should be dead on 6:00, and both marks should be perfectly vertically aligned.   I believe the timing gear is keyed or has a dowel that ensures it can only be installed on the cam in one position, so I have to believe the cam is out of phase somehow. At the very least, with a triangular bolt pattern, it can only be installed in one of 3 different positions.   Before I pulled the front cover, the truck was running alright, no service engine soon lights except an occasional P0172 / rich condition. Timing -16 timing at idle (should be +16), and total -35% fuel trim, two conditions I haven't been able to figure out.   In related news, my injector tested pretty well, wasn't leaking, but I had it rebuilt anyway, and it's on it's way back to me.         Along with this discovery, the good and bad:   Good: The oil pan seal appears undamaged.   Bad: -The timing cover has been reused, and the positioning dowels have been broken. That could explain some of the leaking. -Some kind of white paste or grease was used to try to seal the oil pan seal and timing cover (since wiped off..). -Then, someone globbed silicone all over the front of the cover and also buried the ckp sensor in it. But, they didn't put any inside the cover or use RTV to try to seal the oil pan seal with the timing cover (good).
    • Grumpy Bear
      PF63 Oil Filters Going Away?

      By Grumpy Bear · Posted

      The guy that owns K&P filters last I checked in with him has over 300,000 miles on his Dodge base Hemi using his own 35 micron absolute stainless mesh filter from its first oil change.    The GM study I've posted a dozen times shows the relationship in engine life based in multiples of base units, not miles or years. That is the base unit is the number of miles the motor ran using the reference filter efficiency.    The above two paragraphs dismantle anecdotal arguments IF one changes oil often enough to prevent particle formation and the motor is in otherwise good shape. That is not full of silica (no air filter) or suffering a metallurgical issue that is not part of the lubrication discussion. Poor heat treat in example.   Data from UOA's I've reviewed from more than a few engines can show remarkably broad variations in oil cleanliness using the exact same filter over the course of an engines life.     Lastly there is the common sense of it. Wear debris WILL circulate the engine BEFORE it ever sees a filter in route to that filter and WILL harm the pump which NEVER sees filtered oil.    Alpha question then becomes, given the facts, how long do you believe is a reasonable service life from a vehicle you are certain you will not pass down? That is the junk yard will be it's resting place when you're done with it? (the moral issue most don't care about).    Omega question is then how diligent are you prepared to be in general mechanical, air & oil maintenance? Preventing particulates and keeping them sufficiently dilute; preventing the precursors from generation, amalgamation and precipitation.    If I get a good look at the engine bay of a vehicle I have a fair idea of the owners commitment to the inside of the power train. That 30 micron WIX is still more efficient than a sieve.                 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...