Jump to content

Swapping Center Seat to Console

lexustbs
 Share

Recommended Posts

kaylie dominguez Enthusiast

kaylie dominguez

Posted
Posted

awesome post Rodney I have been looking to this swap as well I can't believe the price some of these consoles are going for and they are either scratched or cracked. I will be ordering from your list as well as I had the same set up as you with the jump seat thank you for all the time you put into this helps out a lot.

  • 2 weeks later...
  • Replies 159
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

lexustbs
lexustbs

Placed my order for all the parts (I think). About $800 into it right now. Will see what comes in. Parts department seems to think this will be all I will need.  I ordered the parts off of Gmpart

lexustbs
lexustbs

I will be installing myself. I'll try and get pictures of the progress and any issues I stumble across. There will probably be extra parts that I missed.

BPIRKOLA
BPIRKOLA

Hi guys!    I may not have my 2016 Silverado anymore but I helped many people with this upgrade on the previous body style (which was much easier and less part numbers required). I attached

Posted Images

DanCee4 Enthusiast

DanCee4

Posted
Posted (edited)

Thank you Rodney!!!! I just sent you a PM as to where in the jump seat you found the fob antenna and board. Also where did you mount them in the new console? 

Edited by DanCee4
Rodney Whaley New Member

Rodney Whaley

Posted
Posted

the antenna for the door locks was near the rear usb  the key fob antenna was towards the center of jump seat.  its a circle cone looking thing with a wire coming out of it.  that gets mounted under the center of the middle try.  the other is by the usb's in the back.

DanCee4 Enthusiast

DanCee4

Posted
Posted
2 hours ago, Rodney Whaley said:

the antenna for the door locks was near the rear usb  the key fob antenna was towards the center of jump seat.  its a circle cone looking thing with a wire coming out of it.  that gets mounted under the center of the middle try.  the other is by the usb's in the back.

Thank you!!!! 
 

Erik Freeman New Member

Erik Freeman

Posted
Posted

i have a trail boss custom and swapped to the long console with usb ports inside of the console as well as on the rear. It also has the card reader inside of the console. Does anyone have any idea where the harness plugs in to power everything?

  • 2 weeks later...
denny noname Enthusiast

denny noname

Posted
Posted
On 6/7/2022 at 5:47 PM, Erik Freeman said:

i have a trail boss custom and swapped to the long console with usb ports inside of the console as well as on the rear. It also has the card reader inside of the console. Does anyone have any idea where the harness plugs in to power everything?

If your jumpseat didn't have the plug in harness then you won't have the plug under passenger seat. I swapped my console last Saturday and have no power for light or USB.  Doesn't bother me in the least, now there is a way to get the front USB to work. Not sure I've seen anywhere to get power to the console unless you had power going to the original one.

Erik Freeman New Member

Erik Freeman

Posted
Posted

 

On 6/16/2022 at 12:45 PM, denny noname said:

If your jumpseat didn't have the plug in harness then you won't have the plug under passenger seat. I swapped my console last Saturday and have no power for light or USB.  Doesn't bother me in the least, now there is a way to get the front USB to work. Not sure I've seen anywhere to get power to the console unless you had power going to the original one.

How do you get the front usb to work?

 

denny noname Enthusiast

denny noname

Posted
Posted
17 hours ago, Erik Freeman said:

 

How do you get the front usb to work?

 

I didn't, I didn't care if it worked or not I just wanted to storage. But on the dash if you have the double USB evidently there is a place you can plug in and run it run it to the front of the USB. If you don't have the double USB you can buy it and swap it out and then run a cable from that to the front.

DanCee4 Enthusiast

DanCee4

Posted
Posted

Good morning fellas, So I swapped out my jump seat to a full center console. Switched out the remote start module and antenna. I also added the wireless charging tray. The power in the rear works but the charging pad doesn’t neither does the remote start or push buttons on the door handles. Am I missing a step? I didn’t add the interior usb either nor did I extend the wire harness to the dash. Any suggestions? Btw it’s a 2022 Silverado 1500LTD. Thanks in advance. 

DanCee4 Enthusiast

DanCee4

Posted
Posted
On 6/25/2022 at 10:56 AM, DanCee4 said:

Good morning fellas, So I swapped out my jump seat to a full center console. Switched out the remote start module and antenna. I also added the wireless charging tray. The power in the rear works but the charging pad doesn’t neither does the remote start or push buttons on the door handles. Am I missing a step? I didn’t add the interior usb either nor did I extend the wire harness to the dash. Any suggestions? Btw it’s a 2022 Silverado 1500LTD. Thanks in advance. 

Update!!! So after about 24 hours the entry buttons on the door and remote start began working. Idk maybe it just re-synced. As for the wireless charger still nothing. Anyone have a solution on this? Rodney?

denny noname Enthusiast

denny noname

Posted
Posted
On 6/27/2022 at 1:32 PM, DanCee4 said:

Update!!! So after about 24 hours the entry buttons on the door and remote start began working. Idk maybe it just re-synced. As for the wireless charger still nothing. Anyone have a solution on this? Rodney?

You should list as much info as you can about your truck in your profile. Each model/style is so different it could be just one particular thing. Like mine has no power plug under passenger seat so I knew xyz...

DanCee4 Enthusiast

DanCee4

Posted
Posted
On 7/1/2022 at 1:29 PM, denny noname said:

You should list as much info as you can about your truck in your profile. Each model/style is so different it could be just one particular thing. Like mine has no power plug under passenger seat so I knew xyz...

I had power under the seat prior to the swap. Post swap everything has power and working, rear usb, remote start, compartment light all powered up. I’m gonna check the connector going to the charging module to see if it has voltage, if yes, then it might have to be programmed. 

  • Like 1
MedicJim New Member

MedicJim

Posted
Posted

Rodney Whaley, I am looking for a folding center Jump Seat with the opening top storage area and the locking bottom storage which has USB port (A, & C) along with a 12V power port, and vents.  If you still have it let me know how much for it?  
 

I only have top storage in my Jump Seat, and do not have a USB port or 12V power port.  I have been doing a good amount of modifications to my truck.  
 

 

Attached are pictures from inside my truck showing the interior color.  

243A4B19-FC7C-40FF-90A2-D2A25BDE72D4.jpeg

1631627B-66C9-4AB1-860B-70B91BDFFBE5.jpeg

4banger Enthusiast

4banger

Posted
Posted (edited)

Not a chance I’d have a cab that large and only have a 5 seater.
 

Also how do the girls get a little closer to you or access?

 

No way I’d ruin the couch in the back either lol.

 

This whole console thing makes zero sense to me as trucks are about versatility. Get a camaro I’d you want singular focus machine lol.

Edited by 4banger

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • asilverblazer
      Another 6.2L engine failure!

      By asilverblazer · Posted

      I included the first gen-cylinder de-activation (active fuel management) in my statement.
    • No1UKnow
      Transmission Woes :-(

      By No1UKnow · Posted

      Hello All!   My 2019 Colorado 3.6 LT, 4WD Crew Cab has approximately 77,500 miles and I recently began experiencing the well-known transmission shudder between about 30 and 65 mph. The problem had worsened to the point that I could no longer attribute it to road conditions - and I had decided to bring the truck to the dealer - when recently, I experienced a sudden loss of power while driving at maybe 40 MPH. Several warning lights flashed, the “Check Stabilitrack” message appeared, and the Check Engine, Stabilitrack, and Traction Control icons remained illuminated. The truck regained driving power, but it stayed in a low gear with unusually high RPMs for the speed. (limp mode?) Because I was only about two miles from home, driving slowly, I was able to make it back and run an OBD-II scan, which showed fault codes U0101, P0700, and U0100. My next trip in the truck was to drive it to the dealer the following day. That trip began normally, but after about a mile I experienced another loss of power, along with the same warning lights and the same “Check Stabilitrack” message. As before the truck remained driveable, but again operated at an abnormally high RPM-to-speed ratio and seemed stuck in a single gear. About a mile later, the dashboard lit up once more, this time displaying “Check 4WD.” Soon after that, I arrived at the dealer. I have verified that the truck still has its original factory transmission fluid, which means it has never received the corrective fluid exchange outlined in GM Technical Service Bulletin #18-NA-355.  That was Thursday of last week and I've heard nothing yet from the dealer.    According to Technical Service Bulletin #18-NA-355 and the build date of my truck, my truck should have the newer LV fluid. I've done a little research and read something about a problem with the wiring harness as well.   Anyone have an insights into this situation?  Thank you!!
    • GMCustomerService
      Damaged Left Rear Bumper & Left Rear Quarter Panel - Repair Questions

      By GMCustomerService · Posted

      Having bumper and other body damages can be very frustrating, especially as a result of a parking lot collision/bump. Our team wants to learn more about the damages to your truck so we can look into ways we might be able to help. When you get the chance, please fill out our support form with more details: https://s.gmc.com/support-request . A member of our team will follow up with you as soon as next available. We want to get you enjoying your truck to the fullest again. 
    • PhilB
      Gas Prices

      By PhilB · Posted

      Did you even read this article?   Even the title of the article says "U.S.-Iran Deal Doesn’t Mean a Swift Return of Oil and Gas Flows"   Remember, crude oil prices are based on FUTURE purchases by the oil companies.  Gas prices are based on FUTURE purchases by the station.  This article stated that many of the oil producing nations have to restart their processes to get the oil produced.  Then the oil has to be shipped to wherever.  And it doesn't get there overnight.  And most of that oil is not coming here. Check out this site:  https://afdc.energy.gov/data/10621   A graph will pop up to show where the US imports their oil from.  Notice that there isn't a lot of import from OPEC and Iraq.  Most of the US import comes from Canada. The US oil produces are selling their oil on the open market, which is why the US fuel costs went up.  So you're correct, the US oil companies are going to slow walk the price downward.
    • GMCustomerService
      Tranmission stays in Low

      By GMCustomerService · Posted

      Having codes and an engine light with no hints on what might be causing it is nothing short of frustrating. How long have these concerns been present? We want to know more so we can look into ways we might be able to help you. When you get the chance, please fill out our support form with additional details on your experience so far. A member of our team will follow up with you as soon as next available: https://s.gmc.com/support-request 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...