Jump to content

Parking/Back up sensors

jeffreydan32
 Share

Recommended Posts

eppieguy Senior Enthusiast

eppieguy

Posted
Posted

Yes, depending on what trim level you are looking at. 

cltsig Enthusiast

cltsig

Posted
Posted

Wouldn't it have been easier to just google this or go to the Chevy/GMC site instead of asking here?  

jeffreydan32 Enthusiast

jeffreydan32

Posted
  • Author
Posted
13 hours ago, cltsig said:

Wouldn't it have been easier to just google this or go to the Chevy/GMC site instead of asking here?  

Well I used this link from GM - https://www.vehicleaccessorycenter.com/inc/files/editor/files/2019_CHEVROLET_FULL_T1_Final.pdf

and as you can see there not listed.  I also googled it and found nothing.

 

I had no idea a GM forum wasn't for asking questions....go figure

  • Like 2
  • Haha 1
cltsig Enthusiast

cltsig

Posted
Posted

Your question was so vague and does not specify whether  you want to know if the brand new trucks offer it as an option or you are looking to add it to an existing truck. Phrase your question the right way and you will get better answers.

jeffreydan32 Enthusiast

jeffreydan32

Posted
  • Author
Posted
4 hours ago, cltsig said:

Your question was so vague and does not specify whether  you want to know if the brand new trucks offer it as an option or you are looking to add it to an existing truck. Phrase your question the right way and you will get better answers.

So are you the forum police?  If you don't know the answer...and evidently you don't...how bout just don't respond.  Why would I ask the question unless I wanted to buy them for my truck?  My question says do they offer for 2019 trucks.  Wouldn't that be considered new?  Looks like you just want to find something to complain about.  Or maybe you know the answer but you just don't like to share with others....lol...come on man 

  • Like 3
Wheelguy Enthusiast

Wheelguy

Posted
Posted (edited)
5 hours ago, jeffreydan32 said:

Why would I ask the question unless I wanted to buy them for my truck?  My question says do they offer for 2019 trucks.  Wouldn't that be considered new?

Not trying to pick at you but I think people were unsure of whether you actually already had the truck or were asking if sensors were an option if you were perhaps shopping for a new truck. Not really worth debating over - simply confusion. Sometimes what seems like a simple question doesn’t always have an equally simple answer, as I feel you could possibly find out in this case.

 

You wouldn’t look for standard equipment like sensors, steering wheels, engines or wire harnesses on a GM accessories site. You’d probably have to find a truck that already has the sensors and use the VIN off of it in order to find all the parts that would need to be ordered for whatever kind of sensors you’re wanting (park assist, blind spot, cross traffic alert, etc.) as well as knowing whether or not this can all be integrated into the vehicle you have (maybe you will need a new driver seat for the vibration warnings). You may need an upgraded Infotainment system so you can change settings. Any extra switches needed, or harnesses. Not that I am any sort of expert, but I can see this potentially turning into a huge project as far as just gathering all the required parts.

 

Next, I’d think you would need to know what, if anything, will need to be programmed.

 

Probably not a complete answer but I would hope it serves 2 purposes showing why people asked about your truck situation & then the scope of the research that might be needed. For all I know you might be able to walk into a dealer and ask them for a complete list of parts needed for a specific package and all the programming & labor.

 

Whatever you end up finding out & doing, I hope all goes well & sorry I’m not knowledgeable enough to fully answer your question but maybe it and the responses above will get you started in the right direction.

Edited by Wheelguy
  • 8 months later...
Dunn Senior Enthusiast

Dunn

Posted
Posted
On 9/11/2019 at 1:35 PM, Jon Hammermeister said:

Did you ever find parking/backup sensors? Recently received a new company truck SLT one would think it would come with these. Mine did not... 

Can they be added with out too much cost?

 

I talked to a buddy from Edmonds and seems to think a dealer can add them.....but new bumpers and wiring seems like it would cost a lot more than than if you just got safety pkg....my 2019 had them my 2020 2500 doesn't, not huge deal but if it wasn't too much maybe

  • 1 year later...
Loren Lyons New Member

Loren Lyons

Posted
Posted

I have a 2021 GMC 1500 and the rear bumper has sensors into it with looks like relays on each side of the bumper. When I am in reverse I have the indicator telling me how close I am to anything in back of me but no alarm. I went into the dealer and was told my truck did not come with back up alarm even it has sensors and relays in rear bumper. can I somehow hook these sensors up so my back up alarm works?

 

  • 3 years later...
TJ 1949 New Member

TJ 1949

Posted
Posted

I have enjoyed reading the conversations about the backup sensors. I am the owner of a 2023 GMC SLT Sierra 1500. My vehicle does not have the back up sensors and I was wondering if there were some kind of place where I could have some sensors put on my rear bumper, but after reading all these comments and it makes sense that it would have to be programmed and all this and that so I’m kind of getting disappointed . it seems that it would be too much trouble to have it done ,if possible and very expensive if you had it done at a GM dealership ,they would probably charge you a whole lot. I just wish my 2023 GMC Sierra had come with these back up sensors and front sensors also .just wondering if it can be done correctly and at a fairly reasonable cost?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • newdude
      Gas fill door

      By newdude · Posted

      Common failure.  You need to replace the fuel door housing.   The painted cover transfers over to the new housing.  To remove the old one there is 4 spots where you poke the plastic to release it.  
    • newdude
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By newdude · Posted

      No such thing as regenerative braking on a pure ICE vehicle.     Regenerative braking is the re-capture of energy from electric motors and stores it in the battery pack.  So hybrids, PHEV and EVs have regenerative braking.     What you are seeing is the charging system changing modes is all.  Its likely entering charge mode for some sort of reason is all.  All of the charging modes will be listed below.   As for L10 vs D.  L10 turns off automatic grade braking.  L10 puts you in control of grade downshifts where in D it will automatically do it based on brake pedal position and other factors.  Otherwise L10 and D drive exactly the same aside from that one aspect.    Battery Sulfation Mode The BCM will enter this mode when the interpreted Generator output voltage is less than 13.2 V for 45 minutes. When this condition exists the BCM will enter Charge Mode for 2–3 minutes. The BCM will then determine which mode to enter depending on voltage requirements.   Charge Mode The BCM will enter Charge Mode when ever one of the following conditions are met:   Windshield wipers are ON for more than 3 s. Climate Control Voltage Boost Mode Request is true, as sensed by the HVAC control module via serial data. High speed cooling fan, rear defogger, and HVAC high speed blower operation can cause the BCM to enter the Charge Mode. The estimated battery temperature is less than 0°C (32°F). Battery State of Charge is less than 80%. Vehicle speed is greater than 145 km/h (90 mph) A current sensor malfunction exists. System voltage is determined to be below 12.56 V When any one of these conditions is met, the system will set targeted generator output voltage to a charging voltage between 13.9–15.5 V, depending on the battery state of charge and estimated battery temperature.   Fuel Economy Mode The BCM will enter Fuel Economy Mode when the estimated battery temperature is at least 0°C (32°F) but less than or equal to 80°C (176°F), the calculated battery current is less than 15 A and greater than −8 A, and the battery state-of-charge is greater than or equal to 80%. Its targeted generator output voltage is the open circuit voltage of the battery and can be between 12.5–13.1 V. When fuel economy mode is active, the generator is not charging, only maintaining open circuit battery voltage. The BCM will exit this mode and enter Charge Mode when any of the conditions described above are present.   Headlamp Mode The BCM will enter Headlamp Mode when ever the head lamps are ON (high or low beams). Voltage will be regulated between 13.9–14.5 V.   Start Up Mode When the engine is started the BCM sets a targeted generator output voltage of 14.5 V for 30 s.   Tow/Haul Mode (if applicable) Pressing the Tow/Haul Mode button located on the center stack, the vehicle system voltage is raised and the remote (non-vehicle) battery will be charged. Having the headlamps on will raise the system voltage and if the Tow/Haul button is applied it will not serve any purpose. The voltage is regulated between 13.9-14.5 V.      
    • jaszr2
      Active Grille Delete

      By jaszr2 · Posted

      Hello from Australia Just sharing that there is now a way to delete the active shutters entirely with just a plug in module. Opens up tons of room to light bars etc.
    • jake111
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By jake111 · Posted

      I have an observation and a question... 1) I watch the voltage closely because I have had to dial in the cut-in/cut-out voltages of the battery separator to my camper.  The "smart" charging drives me nuts.  Anyway, I noticed that when coasting for a while, and especially if lightly using the brakes (though not necessary), the voltage goes up from mid/high-13 volts to mid/high-14 volts.  Then it drops back down after stopping or going again.  Consistently!   The only explanation I can come up with is REGENERATIVE BRAKING!  Well, maybe that's a little bit of an exaggeration, but it's certainly free extra battery charging.   2) Driving on mountain roads I will use L and vary the max gear.  Things straighten out and I end up in L10.  Sometimes I leave it there for a while.  Is there any difference between L10 and D?   
    • devonthegreat
      anyone interested in a 2002 Chevy Silverado 4x4 parts truck NYC

      By devonthegreat · Posted

      **SOLD** Please end or delete post. thank you

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...