Jump to content

Recommended Posts

Posted (edited)

While I'm sure we are all waiting for the adjustable hitch manufacturers to come out with a solution to work with the multipro tailgate. I decided to try and find something that was already around that would work. I originally had a b&w tow and stow, and it was set to 6 inches of drop for my 2020 which sits just about right for a level ride with my utility trailer. Got me to thinking is there a 6 inch drop hitch that has the angled design? And would it clear the new multipro tailgate fully deployed? The answer to both is YES! YES it does! Here is a link to a solution that works.  Hopefully this helps a few people.

 

Ultratow 6 inch Drop - Forged Steel Ball Mount

 

hitch1.jpg

hitch2.jpg

hitch3.jpg

hitch4.jpg

Edited by MrGraff
wording
  • Like 2
Posted

Thats awesome, I bought the stow and tow hoping it would fit and does not, I'm sure that was half the cost too

IMG_9806.jpg

Posted
14 hours ago, MrGraff said:

While I'm sure we are all waiting for the adjustable hitch manufacturers to come out with a solution to work with the multipro tailgate. I decided to try and find something that was already around that would work. I originally had a b&w tow and stow, and it was set to 6 inches of drop for my 2020 which sits just about right for a level ride with my utility trailer. Got me to thinking is there a 6 inch drop hitch that has the angled design? And would it clear the new multipro tailgate fully deployed? The answer to both is YES! YES it does! Here is a couple of links to a couple options.  Hopefully this helps a few people.

 

Ultratow 6 inch Drop - Forged Steel Ball Mount

Curt 6 inch drop Forged Ball Mount

hitch1.jpg

hitch2.jpg

hitch3.jpg

hitch4.jpg

any reason why you didn't go with a 2.5" hitch instead of using the reducer?

Posted
3 hours ago, Chrisw253 said:

any reason why you didn't go with a 2.5" hitch instead of using the reducer?

2.5inch ball mounts are hard to find around here at least in the specific configuration needed to clear the multi pro.  Reducer doesn't really have any drawback from what I've seen other than maybe some weight limitations.

Posted

How do you guys feel about a way to lock out the upper tailgate when a hitch is installed? It would keep the upper gate from opening in case someone tried to open it that wasn't familiar with the flaw in this design. Can still use your existing hitch and receiver and the tailgate is still usable. 

Posted (edited)

I had not tested on the half ton trucks, but it wouldn't surprise me if it did work on all.  The only drawback maybe the drop is too low for the half tons.  Now technically speaking you could get a ball with a riser on it to gain some height back.  However I would think the riser ball would again hit the step when its engaged or pulled out.

Edited by MrGraff
wording
Posted

Ok There is a product coming out within a month or so that will stop the splitgate(upper gate) from opening if there is anything in the hitch. So you won’t have to worry if the splitgate is accidentally opened. This is especially good for people not familiar, ie employees, friends, family

Posted

i'm looking for a rubber 'cup' to install on the gate so if it drops onto hitch is 'catches' it...i also just ordered the angled ball mount! Thanks MrGraff!!

Posted
16 hours ago, Rduatctt said:

Ok There is a product coming out within a month or so that will stop the splitgate(upper gate) from opening if there is anything in the hitch. So you won’t have to worry if the splitgate is accidentally opened. This is especially good for people not familiar, ie employees, friends, family

That's great to know, I'm sure there will be tons of aftermarket options for these tailgates.  The angled ball mount I posted doesn't require any worry as it clears regardless.

  • 1 month later...
Posted
On 9/16/2019 at 1:02 AM, MrGraff said:

That's great to know, I'm sure there will be tons of aftermarket options for these tailgates.  The angled ball mount I posted doesn't require any worry as it clears regardless.

Just an update to McGraff's post...

 

While the Curt and Ultra-tow look similar, the CURT has clearance issues. It is OK if you just drop the step-gate, it misses by just a little. However, the least amount pressure on the step or tailgate and it touches. 

A quick glance and you thing the Ultra-tow and Curt are made in the same place and are the same. They are not. The Curt has more radius which causes clearance issues.

 

Posted
14 hours ago, hptx said:

 

Wonder if it clears without folding it under. Obviously not on the small, but im interested in the large (7" drop) anyway. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Based on what I can tell, yes.   As for updating it, its a mixed bag.  Updates do fix a lot of issues, but occasionally can create some oddities.  They do more good than harm though overall.     Here's what the most current one does and a  V171 Improvements Important: Improvements will vary by model, build configuration, system, and sales region. Not all vehicles have all features. OnStar and Wi-Fi may not work after remote start CarPlay may not automatically reconnect Part of the Driver Attention messaging screen may be in English even though the language is set to something else XM may not work After a dead 12V the radio may set to Arabic at each startup Bluetooth contacts might not be able to sync with the vehicle During an OTA the 12V battery may drain Customer might see a screen telling them to return to the dealer After changing the Wi-Fi SSID or password a device may not disconnect If a device is connected on the 2.4Ghz band, nothing will connect to the 5Ghz one, which could show as slow Wi-Fi speeds Customers might have noticed Wi-Fi dropping in certain areas and reconnecting later Customer might see the top of the screen blinking during Android Auto Android Auto may not connect CarPlay audio might momentarily cut out The "Add Phone" button may be grayed out The radio may not start up   V167 Most Notable Improvements:   Outside Air Temperature is incorrect. -You may see a popup message for Engine Shift. (Corvette Only) After changing the exhaust sound they get a popup that "mode change not applied", even though it was. -When changing volume, the volume bar is for Traffic instead of Audio. -(Corvette Only) Improvements to the placement of buttons and text. -If the customer receives the message "Apple CarPlay Could not connect", the cursor might move in the opposite direction than expected when using the control knob. -Android Auto automatically starts playing their music, even though they have turned that off in settings. -Intermittently they have a red OnStar LED with no OnStar function and/or no audio. -The minimum length of the Wi-Fi password was increased to 12 characters. -The popup message "Driver Attention Check, check your mirrors or Super Cruise will shut down" may not have come up on the display when it should have. -Startup animation added for 20th anniversary of the V-Series on Cadillacs. -The Navigation app received location improvements when going under long underpasses. -In the Navigation app there are filters for charging points that the vehicle cannot use.   V164 Most Notable Improvements Most notable improvements contained in this release may include: Apps Intermittently, an “SD Card Removed” message will pop up in the Navigation app. While in the audio app, the radio may stop working. Trailer Tire Pressure sensors may not be learned in the Trailer app. Not being able to return to the home screen while in the Camera app. After an ignition cycle, the radio might go to a black screen or stop working if using Sirius XM. Spotify icon truncated on Audio app.   SXM When changing power modes with the ignition switch, the HVAC pop up might appear. During startup, the radio will show the brand splash screen then go blank. Receiving a confirmation pop-up when changing drive modes. A “Return to Dealer” message may appear on the radio screen. SuperCruise setting toggle may not work. System After an ignition cycle, the radio might go black or stop working if using Sirius XM (SXM). Settings When performing a factory reset, the radio may stop working. After performing a factory reset, the radio may stop working when trying to switch users. When trying to go into the Language section quickly after startup, the radio may stop working. Projection Wireless CarPlay cannot be connected after unpairing another wireless Android Auto device. When the Android Auto screen comes up to connect wirelessly, the screen may freeze if the Cancel button is pressed. Removed the Apple CarPlay Cannot Connect screen when a device fails to pair during the autoconnect process. CarPlay information may not show up in the audio app. Near Field Communications (NFC) chime may be heard when NFC does not work. The Cannot Connect screen does not pop up after the first connection on wireless CarPlay fails. Apple CarPlay is now functional in Guam. Over the Air (OTA) When a software update is cancelled, the downloading logo may still be displayed. Energy When using the Energy app, the radio may stop working. When plugging in the vehicle, the display might show “Now” instead of “Charging Upon Plug In.” Instrument Cluster Voice recognition can be started while on an OnStar or phone call. When downloading contacts, there is a progress bar and circles on the Recents page of the cluster. The temperature on the cluster and the display may be different. After receiving and ending a call on the secondary paired phone, the cluster may get stuck on the phone menu. Bluetooth Intermittent Bluetooth connection loss.
    • Looking for help troubleshooting a metallic like front end rattle. Figured I’d see if anyone had thoughts before I schedule an appointment with the dealer.   The rattle is fairly loud and occurs primarily when the front driver side wheel hits a bump, even fairly minor road seams. Sometimes does it when the passenger hits a bump but I don’t believe when the rear hits. Rattle still occurs when foot is pressing brake peddle so I think that rules out the caliper rattle I’ve read about. I’ve also checked the running boards and they are tight.   Most noticeable at slow speeds.    Any insight is appreciated. 
    • We try to make cruise the coast. It’s where our favorite casino is. I only want to spectate. Never took a car. Always had one to take. I belonged to a club once. Even when I used to drag raced. It was during test and tune. Probably because I’m not a night owl, party person. 
    • We had a pretty big cars and coffee in Indy this past weekend.  Pretty much anything and everything was there.  
    • Good looking Olds, and TRX!   I haven't been into car shows either. I'm probably not a convert but I did push myself this year to attend a few select events to challenge some assumptions and try to experience car-based social clubs in a different way. I joined up with the local Hagerty group for some cars/coffee events, group drives. A month ago I showed my '94 Camaro I rescued last fall at Radwood. Had a good time, but, there was some sitting around with the car and that's the part of shows I don't enjoy as much. I prefer to be a spectator, walk the show, grab a burger, go home.   Radwood was the only era-limited event, but where it had strict model year limitations, it made it up in variety. Having Jason Camissa there was also a hoot.   Where I see old 50's car shows, doo-wop and winga dinga music stuff fading out, same with "only" vintage muscle clubs, it seems to be the activity-based clubs/events which are gaining strong popularity. Places where all cars and interests come together.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...