Sign up for FREE! Become a GM-Trucks.com Member Today!
In 20 seconds you can become part of the worlds largest and oldest community discussing General Motors, Chevrolet and GMC branded pickups, crossovers, and SUVs. From buying research to owner support, join 1.5 MILLION GM Truck Enthusiasts every month who use GM-Trucks.com as a daily part of their ownership experience.
While driving my 2014 Silverado, I never have a problem if I accelerate quickly. However, there has been skipping/sputtering when I coast or slowly accelerate. This is not a clicking, loud knocking sound like I see most describe on here... Anyone have any idea what it could be? Thanks in advance! If needed I can try and video the sound later on today.
By Tony Higgins
Installing the OPT 7 LED lights on the Step Bars.
Installed the RH side into the Door Connector, however on the LH side the Door connector is not really accessible.
I need to know where I can splice into elsewhere.
Is the "Junction box" on the kick panel for the Door Connector?
Or do I have to wire it into the BCM?
If so which one is for the LH Turn Signal?
I found the Grey wire for the Courtesy Light.
I do not have Running lights in my current mirrors either.
Any help would be appreciated.
Hello all, I’m sorry if this isn’t posted in the right section but I couldn’t find any results for the problem I’m having.
So a little bit of back story.... I have a 2005 Silverado 1500 2wd with 180,xxx miles on it, It’s a good old girl. I recently had a lot of work done to the front end, new rack and pinion assembly, new coils, shocks, spindles, new ucas, new upper ball joints and tie rod ends. I had a shop install on the parts because I don’t have a driveway to work in right now. All the parts replaced were stock oem parts, so well worn out. The truck rides great now much more controlled and steering feel is firm. But I noticed there is about an inch of free play in the steering wheel ( no resistance, no moving the wheel in the free play).
What do y’all think it could be? I checked the intermediate steering shaft for play and it is moving with the u-joint at the rack and pinion. Can the gear box be adjusted?
Thank y’all for your insight. I don’t just want to fire the parts cannon in vain. Again thank you for all the help!
By Adrian C
Hi, I have 2 questions. One, I want to do the HD Front end conversion on my 2007 NNBS Silverado1500. I know what I need, and I have decided on the 2011-2013 HD grill and bumper. I have gone on line and seen some people go with the 2007-2010 HD hood and some people go with the 2011-2013 HD hood. Would any one know the difference or if one fits better onto the 1500 truck? And does anyone know how to install the bumper? And the second question was, How can I convert the truck into full electric mode? I have manual windows and no power locks. My truck is extended cab and I would wish for the back windows to work as well. Or does anyone have a really good video on what parts I need and how to do it step by step? I am by no means a mechanic but i do work on my trucks here and there on small things. Thanks in advanced!
Recently Browsing 0 members
No registered users viewing this page.
Most OnlineNewest Member
Who's Online 133 Members, 1 Anonymous, 1,975 Guests (See full list)
- HK GUY
- Pate Services
- Texas Sandman
- Nightcaller NCD
- @[email protected]
- Jeremy Williams
- Free home
- Kyle's AT4
- Amanda Topper
- Marcel Almeida
- MTU Alum
- The G-Man
- Matt Bode
- Walla Walla Joe
- Jake hussey
- BO TIE 1