Jump to content

Quality tools options

Penguin VII

By Penguin VII
in Garage, Shop & Tools

 Share

Recommended Posts

Penguin VII Enthusiast

Penguin VII

Posted
Posted

Hey all,

 

I recently came across garagejournal while poking around looking at info for building a garage (which I hope to do in the next 2-3 years to start some bigger projects). Boy oh boy are those some opinionated folks over there. While I've got a lot more poking around to do I have been looking at a lot of the reviews for the new HF Icon line of tools, and everything looks real solid about them. I bought a torque wrench to replace my crappy Craftsman one and have been impressed with it's initial quality (time will tell how it holds up).

 

I know HF seemed to have exclusively garbage in the past but seem to have really turned things around in the past few years with many more quality items. I'm curious to know what tool brand you would all recommend. I refuse to spend money on Snap-On/Mac/etc. I just don't use them for a living and can't justify the cost. I've been bitten a few times by Husky and Kobalt (although maybe they have turned around in recent years as well) and Craftsman is pretty much dead to me.

 

I'm not looking for used tools because I don't want to go through the hassle of QCing everything and worrying about where to find X or Y, I'd rather just buy new and preferably from the same spot, but I don't need everything matching, just makes life simpler.

 

Anyway, what are everyones thoughts here? People still live by Craftsman? Snap-On or nothing? What is your recommendation for solid middle of the road tools?

RyanbabZ71 Senior Enthusiast

RyanbabZ71

Posted
Posted

Lots of craftsman and some kobalt. Also have a bunch of gear wrench brand sets of tools


Ryan B.

tbarn Senior Enthusiast

tbarn

Posted
Posted

Most of the brands are OK for a DIY'r. Mine are mostly Snap On, Mac and OLD Craftsman. Newer Craftsman are not nearly as good as the older ones. A lot of the time you will find that the socket wall on cheaper sockets will be much thicker because of cheaper steel. OK except it creates problems fitting in tight spaces.

Penguin VII Enthusiast

Penguin VII

Posted
  • Author
Posted
9 hours ago, tbarn said:

Most of the brands are OK for a DIY'r. Mine are mostly Snap On, Mac and OLD Craftsman. Newer Craftsman are not nearly as good as the older ones. A lot of the time you will find that the socket wall on cheaper sockets will be much thicker because of cheaper steel. OK except it creates problems fitting in tight spaces.

I've noticed that my Craftsman sockets have started to have a higher chance to round bolts. I wasn't sure why initially but I'm starting to think that the sockets are just cheap which is causing them to extend past the original sizes. I need to get a spec and measure to get a better sense of this but it's partly what started me looking at new tools.

diyer2 Senior Enthusiast

diyer2

Posted
Posted

I think Craftsman was bought by Snap On.

No more free tool exchange I believe.

I have old Craftsman, Kobalt, Mac and Gear Wrench.

My son is a mechanic and owns over $15 K of Snap On tools.

There is a quality difference with pro tools.

 

Not worth the money IMO for the DIY guy.

Buy cost effective tools and replace when needed.

I had a Kobalt tool fail. My fault.

Took it to the store and they gave me a new one.

 

:)

 

tbarn Senior Enthusiast

tbarn

Posted
Posted (edited)

Craftsman is a Stanley/Black and Decker company. Also own Mac tools.

Edited by tbarn
RyanbabZ71 Senior Enthusiast

RyanbabZ71

Posted
Posted
I think Craftsman was bought by Snap On.

No more free tool exchange I believe.

I have old Craftsman, Kobalt, Mac and Gear Wrench.

My son is a mechanic and owns over $15 K of Snap On tools.

There is a quality difference with pro tools.

 

Not worth the money IMO for the DIY guy.

Buy cost effective tools and replace when needed.

I had a Kobalt tool fail. My fault.

Took it to the store and they gave me a new one.

 

[emoji4]

 

 

You can still exchange broken craftsman tools. Ace hardware, Lowe’s and menards all currently carry craftsman

 

 

Ryan B.

Penguin VII Enthusiast

Penguin VII

Posted
  • Author
Posted
1 hour ago, RyanbabZ71 said:

 

You can still exchange broken craftsman tools. Ace hardware, Lowe’s and menards all currently carry craftsman

 

 

Ryan B.

I was told by my local Lowes that you can only exchange Craftsman tools purchased there.

captadamnj Enthusiast

captadamnj

Posted
Posted

Started picking up some cordless tools not too long ago...after looking at the Craftsman, Dewalt, Makita and Milwaukee, I settled on Milwaukee M12 platform.  Have an impact driver, impact wrench, ratchet, angle drill and some lights in inventory so far.  Went M12 over M18 as I just couldn't justify the added weight and battery cost for mostly hobbyist type work.  Have been very impressed with battery life so far, have never had an issue with a job I couldn't handle.  The M12 3/8 impact handles lug nuts on my HD no problem.  With the hex bit drill bit set, haven't found a need for a regular drill as the combination of the angle drill and the impact driver have done everything I wanted them to do.  All in all, very pleased.  And endless more options out there.  Suspect will add a circular saw and sawzall next, may put the rotary tool on holiday wish list to get myself uncorded from that tool, as well.  So far so good.

Penguin VII Enthusiast

Penguin VII

Posted
  • Author
Posted
2 hours ago, captadamnj said:

Started picking up some cordless tools not too long ago...after looking at the Craftsman, Dewalt, Makita and Milwaukee, I settled on Milwaukee M12 platform.  Have an impact driver, impact wrench, ratchet, angle drill and some lights in inventory so far.  Went M12 over M18 as I just couldn't justify the added weight and battery cost for mostly hobbyist type work.  Have been very impressed with battery life so far, have never had an issue with a job I couldn't handle.  The M12 3/8 impact handles lug nuts on my HD no problem.  With the hex bit drill bit set, haven't found a need for a regular drill as the combination of the angle drill and the impact driver have done everything I wanted them to do.  All in all, very pleased.  And endless more options out there.  Suspect will add a circular saw and sawzall next, may put the rotary tool on holiday wish list to get myself uncorded from that tool, as well.  So far so good.

I've got the M18, have been pretty impressed with it, although I've noticed that the orbital sander chews through the smaller batteries, but the larger one lasts forever. Pretty happy with the Milwaukee line of tools in the few years I've had them honestly.

  • 2 months later...
L86 All Terrain Senior Enthusiast

L86 All Terrain

Posted
Posted

I have good luck with Westward tools. You may not be able to get them in the US, we get them through Acklands Granger in Canada. They are Taiwanese made so they are great quality tools at affordable prices. Great for a DIY'er. Stanley isn't too bad either for socket sets. Wrenches: Jet Tool, Grey Tools Canada, Proto, Mac, Sunex, Mastercraft (Canadian tire Chinese) for beater wrenches or truck sets. We have the Snap On truck that comes by once a week, but you're paying 500% cost. I bought a trouble light from them to help support the truck, I figured about $50, the invoice was $167 haha never again. They sell CKRT knives with a Snap On logo for twice the price as the CRKT knife, which are both garbage btw. 

  • 1 year later...
  • 1 year later...
Spurshot Senior Enthusiast

Spurshot

Posted
Posted

Old thread, but always relevant.  Like most of you, I have a mix.  Some Snap-On, Craftsman, etc.  

 

I've had a combination end wrench set from Tekton for a couple years now.  I'd say the fit on fasteners and finish of the wrenches are on par with any of the best.  I can highly recommend Tekton. 

 

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,925
    Total Members
    8,960
    Most Online
    btm
    Newest Member
    btm
    Joined

  • Who's Online   4 Members, 0 Anonymous, 1,416 Guests (See full list)

  • Latest Articles

  • Posts

    • CamGTP
      Gas Prices

      By CamGTP · Posted

      Can ask that about a lot of places.   Holiday sells 91 for $1 over 87 octane. BP 93 is 80 cents. Amoco 93 is 80 cents Kwik Trips is $1.20 for 92 or whatever they have and $1 for the 91.   I know that this is not exactly same as what you are saying with the premium to premium debate of those two stations but why is there such a difference. Top Tier this and that, it's all BS. All the fuel comes from the same damn refinery, so give me a break.
    • Grumpy Bear
      Gas Prices

      By Grumpy Bear · Posted

      Why does Mobil Premium cost 90 cents a gallon more than Shell Premium when their regular offerings are but pennies apart? 
    • CamGTP
      Gas Prices

      By CamGTP · Posted

      Was all the way down to $3.69 a gallon but then jumped back to $3.99 just because for some reason.   Diesel floats between $4.80's to $5.10ish a gallon. I even saw Diesel #1 for $6.09 today but nobody in there right mind even buys that in the summer.
    • Coastie05
      OTA updates and radio still cuts out

      By Coastie05 · Posted

      Mine just keeps lagging or getting stuck on the reverse camera. When I turn off the truck, get out, and close the door it will still stay on. It’s very intermittent and I would not be able to duplicate the issue. 
    • Chuck FB
      Gas Prices

      By Chuck FB · Posted

      I was checking out fuel prices at my farm fuel retailer at their pumps and yes the farm price is a bit lower than the non dyed fuel and was glad to see that the regular farm gas price has dropped a lot from what it had been but what blew me away was the price of diesel as the spread now compared to before the prices went up earlier in the year, diesel was actually slightly lower than gas which was a switch from the theme the last number of years. However that sure isn't the theme lately and definitely not right now. The prices I will post are not from that retailer but just looking at gasbuddy for the main city in this area and instead of posting the lowest price someone found I will list the higher price ( and that may not be the highest price, just whatever someone posted on gasbuddy ).   So regular gas and there are a lot of stations listing the same price for regular is 1.68 a liter, premium 2.00 a liter. Diesel 2.03 a liter for a top price I saw on diesel.   Figures out to 6.36 a us gallon Canadian funds for regular and 7.68 for diesel. With the US exchange rate it would be 4.58 us for regular and 5.53 for diesel.    Thought I would figure that out to get a picture of what it settles out like compared to various US prices and its about the same as the current price in Fairbanks AK as Anchorage tends to be lower. So yes, these would be the prices and higher along the way on the Alaska highway where they know they have a captured market !, for fuel prices for those beginning the long drive back to the lower 48   The problem is our Canadian dollar and going to the states that have the high prices, boy do we pay then !

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...