auxiliary switch options

[Shoguns80]

Looking for an auxiliary switch that'll mount directly in the factory locations and haven't been able to locate any GM part options.  I'm trying to maintain that factory look.

 

Is anyone aware of any aftermarket options?  I recently purchased the grill mounted dual 10" light bars from Rough Country that I'd be using this for.

 

Edited November 4, 2019 by Shoguns80

[Will S]

New head light switch, not sure if switch is same on your truck 

84168423 blue light

23458495 red light 

[TXguy]

Will this switch fit a 2019 without modifications?

[Cohocarl]

Haven't seen one that fits in the switch row like you circled.  If GM has one available, I haven't seen one yet.  Would be nice to have one though...

[rbrjr1]

the switches you've seen for those were GM Outfitter Auxiliary Switches.

 

AUX SWITCH INSTALL is the thread you are looking for

 

https://www.gm-trucks.com/forums/topic/168371-aux-switch-install/#comments

 

 

those switches all share space on the same PC Board.  Are the circled areas in question non functioning spacers?

Edited November 5, 2019 by rbrjr1

[Smoothbassman]

9 hours ago, rbrjr1 said:

the switches you've seen for those were GM Outfitter Auxiliary Switches.

 

AUX SWITCH INSTALL is the thread you are looking for

 

https://www.gm-trucks.com/forums/topic/168371-aux-switch-install/#comments

 

 

those switches all share space on the same PC Board.  Are the circled areas in question non functioning spacers?

The upfitter switches in that thread are for 2014-2019 trucks. 

 

Need the 2019-2020 switches. 

[rbrjr1]

12 hours ago, Smoothbassman said:

The upfitter switches in that thread are for 2014-2019 trucks. 

 

Need the 2019-2020 switches. 

on the switch bank you have, like the circled areas in the photo above, are just spacers, not functioning switches?

(have you taken the switch bank out and pulled the part number off of it?)

Edited November 6, 2019 by rbrjr1

[Shoguns80]

13 hours ago, Smoothbassman said:

The upfitter switches in that thread are for 2014-2019 trucks. 

 

Need the 2019-2020 switches. 

thanks, you beat me to it.

 

47 minutes ago, rbrjr1 said:

on the switch bank you have, like the circled areas in the photo above, are just spacers, not functioning switches?

(have you taken the switch bank out and pulled the part number off of it?)

 

Yes the circled ones are just spacers but they're functional switches on some of the LTZ and High Country trim levels.  This leads me to believe there is a way to wire up a factory switch but it may be labeled as something else.  once the aftermarket catches up a custom switch should be fairly simple to produce.

[rbrjr1]

41 minutes ago, Shoguns80 said:

thanks, you beat me to it.

 

 

Yes the circled ones are just spacers but they're functional switches on some of the LTZ and High Country trim levels.  This leads me to believe there is a way to wire up a factory switch but it may be labeled as something else.  once the aftermarket catches up a custom switch should be fairly simple to produce.

You haven't pulled the switch to check the harness?

when you do, open it up to see what electronics are present at the spacers..

 

body builder manuals are available now, you've checked them for electrical pinouts?

Edited November 6, 2019 by rbrjr1

[Shoguns80]

16 minutes ago, rbrjr1 said:

You haven't pulled the switch to check the harness?

when you do, open it up to see what electronics are present at the spacers..

 

body builder manuals are available now, you've checked them for electrical pinouts?

havent pulled the panel yet.  will snap some pics and post when I do.

 

i'm no electrician but i'd assume since the rough country lights come pre-wired and use the battery as a power source its a matter of replacing the relay switch included in the kit with one of these panel switches  ???

[rbrjr1]

4 hours ago, Shoguns80 said:

havent pulled the panel yet.  will snap some pics and post when I do.

 

i'm no electrician but i'd assume since the rough country lights come pre-wired and use the battery as a power source its a matter of replacing the relay switch included in the kit with one of these panel switches  ???

in the legacy body style, it's been a mixed bag, some people had a wiring harness that already pinned out all the switches, but didn't have any relays or battery/switched leads. some people had nothing in their harness except the switches which came with the vehicle, I think one or two people actually had everything including the relays for the outfitter switches in the X51 fuse box.

 

the issue with that thread is that it tries to consolidate 4-6 years of GM evolution in manufacturing..

[Adam Lech]

Looking for the same solution on those exact switches...want to install a light bar and a train horn on each but I don’t see anything available

[2k19Sierra]

The gm aux switches are on the left side of the steering wheel now. Couple threads on here about them! They work great! 

[Smoothbassman]

The gm aux switches are on the left side of the steering wheel now. Couple threads on here about them! They work great! 

I need these switches in my life!!!



Sent from my SM-N960U1 using Tapatalk

[maillet282]

I wanted to do something a bit different. 
 

installed one of these Switchpods. Still waiting on 6 AWG ring terminals to arrive in the mail to finish wiring up the relay pod itself