What have you done to your AWESOME AT4!.....

[EXSlider400]

On 8/13/2020 at 9:10 AM, JansterZ71 said:

That’s awesome.  Just ordered the Fleece Version “All Lights On” on Amazon.  Thanks for your help!

 

https://www.amazon.com/dp/B083P6QW4L/ref=cm_sw_r_cp_api_i_HMunFbTBF4SKT

Could have ordered a cheap diode instead...and no wire splice and takes a few minutes.... just saying

Edited August 29, 2020 by EXSlider400

[AT4 Duramax]

On 6/3/2020 at 6:38 AM, jflan23 said:

Finally, an AT4 thread!


-Wrapped the “black chrome” fog light bezels most recently
-added some extra lighting in the front
- extra backup lighting helps with the ridiculously bright screen problem
-retrax tonneau with Yakima rack

I want to get a bed rack like that but I have the carbon pro bed and the sides of the bed curve up to the bed rails-no flat surface to clamp on.

[jflan23]

I want to get a bed rack like that but I have the carbon pro bed and the sides of the bed curve up to the bed rails-no flat surface to clamp on.

Mine aren’t clamped to the rails, the tonneau cover I got (retrax pro xr) have a T-slot. The Yakima racks have an adaptor kit that allows it to bolt right to the t-slot.

[AT4 Duramax]

3 hours ago, jflan23 said:

Mine aren’t clamped to the rails, the tonneau cover I got (retrax pro xr) have a T-slot. The Yakima racks have an adaptor kit that allows it to bolt right to the t-slot.

That looks really nice.  I'm not doing a tonneau cover though. 

 

[Jgreene11]

On 8/28/2020 at 2:03 PM, Supercup said:

 

Time to start again - traded the 2019 for a 2020 AT4 Carbon Pro - to get trailer tow mirros and see through trailer camera system.  My 2019 had the 15 cameras, but the 19's did not have the "see thru" camera option to add.  Found a 2020 - exact same options as my 2019 ( fully loaded including performance package) and it had the trailer tow mirrors.  The are great for seeing behind you, but do create quite a blind spot if turning left or right and looking out as you can't see over the mirror, like you can on the lower profile stock mirrors on the 19.

 

Just swapped the Methods from the 19 to the 20.  The 19 had the Ready lift SST level kit and UCA-'s - for the 20 I just ordered the BDS 2.5" DSC coilover system - doing the lift right this time.  So now I have the truck I want everyday, that better meets my towing needs!  Could not be happier.

 

What’s tire size? 

[Supercup]

1 hour ago, Jgreene11 said:

What’s tire size? 

Staying with stock 275/65/18 Duratrac Wranglers for now - will got to larger tires when those are toast. 

[JSBAT4]

On 6/13/2020 at 10:34 PM, Schmoe said:

-GM Performance exhaust 

-debadged and rebadged 

-painted factory wheels two-tone (Kept the grey, painted polished chrome black)

-window tint

-BFG KO2 (Kicked the white letters out)

-step delete

-caliper covers

Where did you get your caliper covers from? My 2020 AT4 is white and I'm looking at powder coating the stock rims black and I'd like red caliper covers to match the red of the tow hooks 

[Supercup]

Traded 2019 for 2020 - to get trailer tow mirrors and more cameras to view around the trailer - same options as 2019.  Added BDS 2.5" lift with Fox Coilovers with DSC in front and 2.0 Fox's in the rear.  Very happy witha the outcome.  Had RL SST 2" level kit on my 2019 with RL upper control arms.  Shaft angles were too extreme - with BDS they are basically level  with diff drop bracket - much better set up.     Only issue I had is my 18x9 methods are 18MM offset (5.75" backspacing) and that interfered with the tie bar - so had to add spacer for now to make it work.  Better wheel set up would be Method 18x9 with <-12> mm offset (4.5" of back spacing) - that would eliminate the need for the spacer.  when I get bigger tires I will make the switch. 

 

 

RL SST 2" level kit with UCA's - 2019 AT4 

 

BDS 2.5" lift with Fox shocks on 2020 AT4 

 

 

Edited September 30, 2020 by Supercup

[JSBAT4]

On 6/8/2020 at 10:01 PM, Dani2005 said:

Out with the black mirror caps, in with the white

 

 

Are these the GM mirror caps or from another manufacturer?

[Dani2005]

Are these the GM mirror caps or from another manufacturer?

GM mirror caps

Sent from my Pixel 4 XL using Tapatalk

[NonTypicalCPA]

Installed a new Western plow. 
 

[SpiderMA]

On 10/2/2020 at 8:20 PM, NonTypicalCPA said:

Installed a new Western plow. 
 

 

 

Any  chance you could upload a photo showing push plate without plow attached.  I am curious the amount of cutting/removal required.  I have a Fisher HT for years that has always been installed on my trucks ('12 avalanche, '14 silverado 1500) and I would like to  install on my AT4.  The only reason I did not install last year was due to all my brake issues which seems to be ok now.

 

 

[NonTypicalCPA]

On 12/15/2020 at 9:39 AM, SpiderMA said:

 

 

Any  chance you could upload a photo showing push plate without plow attached.  I am curious the amount of cutting/removal required.  I have a Fisher HT for years that has always been installed on my trucks ('12 avalanche, '14 silverado 1500) and I would like to  install on my AT4.  The only reason I did not install last year was due to all my brake issues which seems to be ok now.

 

I sold my Sno-Way due to the loss of ground clearance. With the Western there is no loss. I’m very happy with it.  Minimal cutting but you do lose the tow hooks. 

 

Edited December 19, 2020 by NonTypicalCPA

[wurgs]

On 6/10/2020 at 8:46 PM, At4Life said:

I debated coming up with my own custom from him but I saw this combo and I couldn't resist!  Ordered immediately.  Can't wait to get them.  

 

After seeing your great looking emblems I had to follow your lead. Just came in the mail today, can't wait to get them put on

[At4Life]

1 minute ago, wurgs said:

 

After seeing your great looking emblems I had to follow your lead. Just came in the mail today, can't wait to get them put on

Awesome!  I get compliments on them all the time.  Subtle changes make all the difference!