Jump to content

Light bars

Londart2020
 Share

Recommended Posts

Londart2020 Enthusiast

Londart2020

Posted
Posted

Looking to see if anyone has done any light bars in there 19-20 GMC grill? If so can you give a full breakdown on the specs i.e. Brand, length, 1 or 2 row where did you run the switch to??? Thanks.

Swiftks Enthusiast

Swiftks

Posted
Posted (edited)

I had the 20" Baja Designs S8 kit installed:

 

https//www.bajadesigns.com/products/Chevy-Silverado-1500-2019-S8-Grille-Mount-w-20-S8.asp

 

Also did the Baja Designs squadron pro pillar lights:

 

https://www.bajadesigns.com/products/Chevy-Silverado-1500-2019-A-Pillar-Kits.asp

 

I paid to have everything installed, so I can't speak to the installation per se, but everything fits perfect.  I do know that the grill light mounting kit won't work for the LTZ or high country grill, as another user experienced, but worked perfect in my Trail Boss.

 

I bought the switches and plate from https://billetautomotivebuttons.com/ and choose the colored LED buttons that light up when pressed.

 

1.thumb.jpg.c1a8a01aa5d56999dd2dce2b17724545.jpg

 

2.thumb.jpg.f86061dfee65087d8698abac39e520aa.jpg

 

4.thumb.jpg.04775a165d3b077e1ceee2979fdf2bd6.jpg

 

3.thumb.jpg.260412fca007b3bcfb2ddd07b67e7e11.jpg

 

5.thumb.jpg.9b637743ccad8df5f9d3c6a016b71d6d.jpg

 

6.thumb.jpg.8e9a663db8473cefcf872888379f4e40.jpg

Edited by Swiftks
  • Like 2
Trvlngnrs Enthusiast

Trvlngnrs

Posted
Posted

I installed the Baja Design 20" bar on Monday. It's a fairly simple install as they send the brackets and the electrical cable from battery to dash switch.

 

You can watch a couple videos on YouTube to learn how to get the grill off. But be warned you don't take the grill all the way off, you tilt the top forward so you can reach in and loosen the 4 bolts that hold the mounts on. They slide into a space at the bottom of the grill, so the grill needs to be on.

 

I took the switches off the wires, taped them to a wire snake and pushed them thru a rubber "nipple" that Chevy puts on each side of the firewall for future wire runs. You need to cut the tip of the nipple off to thread the snake/wire thru. It was pretty tight so I squirted some silicon spray on it, then it went in pretty easy. It comes out in the cab above the gas pedal. 

 

I have finished with the install of the switches, because I don't like the ones Baja Design includes. They don't match anything in the truck. I'll wait to find better switches that look more "stock". 

 

Here's a photo of the hi beams, then the LED bar:

IMG_3985.jpeg

IMG_3987.jpg

  • Like 1
Chrisd534 Enthusiast

Chrisd534

Posted
Posted

OP is asking about GMC not Chevy. Although those are killer installs.. 750 for a 20 inch light bar!!?! 

  • Like 1
Chrisd534 Enthusiast

Chrisd534

Posted
Posted

All good! Weird it's showing 749 for me looking at the link swiftks posted. Assuming it's the same one? 

Trvlngnrs Enthusiast

Trvlngnrs

Posted
Posted (edited)

It's the same. I purchased it at Battle Born Offroad. They had a lower price + a store discount.

 

If you want to purchase thru Baja Design, just call them and they'll pretty much give you a 10% discount.

 

Here's a photo of the box & light, then another photo of the switches I don't like.

IMG_3940.jpg

IMG_3958.jpg

Edited by Trvlngnrs
Londart2020 Enthusiast

Londart2020

Posted
  • Author
Posted
10 hours ago, Swiftks said:

I had the 20" Baja Designs S8 kit installed:

 

https//www.bajadesigns.com/products/Chevy-Silverado-1500-2019-S8-Grille-Mount-w-20-S8.asp

 

Also did the Baja Designs squadron pro pillar lights:

 

https://www.bajadesigns.com/products/Chevy-Silverado-1500-2019-A-Pillar-Kits.asp

 

I paid to have everything installed, so I can't speak to the installation per se, but everything fits perfect.  I do know that the grill light mounting kit won't work for the LTZ or high country grill, as another user experienced, but worked perfect in my Trail Boss.

 

I bought the switches and plate from https://billetautomotivebuttons.com/ and choose the colored LED buttons that light up when pressed.

 

1.thumb.jpg.c1a8a01aa5d56999dd2dce2b17724545.jpg

 

2.thumb.jpg.f86061dfee65087d8698abac39e520aa.jpg

 

4.thumb.jpg.04775a165d3b077e1ceee2979fdf2bd6.jpg

 

3.thumb.jpg.260412fca007b3bcfb2ddd07b67e7e11.jpg

 

5.thumb.jpg.9b637743ccad8df5f9d3c6a016b71d6d.jpg

 

6.thumb.jpg.8e9a663db8473cefcf872888379f4e40.jpg

I like your switches and location, very clean..thank you.

  • Like 1
VGZPRT Enthusiast

VGZPRT

Posted
Posted

2019 Sierra Denali 30 inch straight single stack Black Oak tight fit but I’m very happy with how it worked out. I had the 40 or 42 inch curved  but just could not get it to fit. 

F3F6E897-0B74-4E45-946F-8A76E6176BA9.jpeg

VGZPRT Enthusiast

VGZPRT

Posted
Posted

2019 Sierra Denali 30 inch straight single stack Black Oak tight fit but I’m very happy with how it worked out. I had the 40 or 42 inch curved  but just could not get it to fit. 

E9548719-AF1E-4510-AE82-2BE69AA0687D.jpeg

  • Like 1
arcstarter Enthusiast

arcstarter

Posted
Posted
3 hours ago, VGZPRT said:

2019 Sierra Denali 30 inch straight single stack Black Oak tight fit but I’m very happy with how it worked out. I had the 40 or 42 inch curved  but just could not get it to fit. 

E9548719-AF1E-4510-AE82-2BE69AA0687D.jpeg

how did you manage to mount it?

  • Like 1
  • 8 months later...
DustinPurdy Enthusiast

DustinPurdy

Posted
Posted
On 1/30/2020 at 10:52 AM, VGZPRT said:

2019 Sierra Denali 30 inch straight single stack Black Oak tight fit but I’m very happy with how it worked out. I had the 40 or 42 inch curved  but just could not get it to fit. 

E9548719-AF1E-4510-AE82-2BE69AA0687D.jpeg

I’m also curious on how and what this was mounted too 

  • 1 year later...
Cigarette1AT4 Enthusiast

Cigarette1AT4

Posted
Posted
On 1/30/2020 at 9:50 AM, VGZPRT said:

2019 Sierra Denali 30 inch straight single stack Black Oak tight fit but I’m very happy with how it worked out. I had the 40 or 42 inch curved  but just could not get it to fit. 

F3F6E897-0B74-4E45-946F-8A76E6176BA9.jpeg

Hello all, new to the site so if this has been answered I apologize.  I purchased a 2021 AT4 1500 a few months back and have been looking at LED lights for the grill and wanted a 30" bar, love this install!  Do you have any pix of the mounting and brackets you picked up from Depot?  Of all things I am a service manager for a Ford store but we also own a GMC/Chevy store, figured I'd go to the dark side for a while, love the truck, just needs more lights.  When I had my F-250's it was easy but not a lot of room to play here.  Thanks in advance!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Grumpy Bear
      OCI, not when but why?

      By Grumpy Bear · Posted

      Sad thing is that this doesn't have to be the case. LSPI can be solved without a reduction in TBN. Swap Ca for Mg.  Cats are not a issue if the OEM can get a ring and valve guide seal even at SN levels of SAPS. Dizzy is purring like a kitten with a bowl of warm milk. 200K of Full SAPS oil and zero detonation issues and nice a clean inside and out. This shouldn't be an issue. It isn't 1920.    Tell ya what AMSOIL SS is excellent at, internal cleanliness. The new formula is even a step up from their already outstanding cleanliness levels. Can't say the OEM offering is quite that clean. There marketing suggest the SS is cleaner.     That is the only defense with at shelf oil. Nothing wrong with them if you ignore the marketing and OEM 'recommended' OCI and use a thimble full of common sense. 😉 You go sir. 
    • StingerZ16
      Roll up bed cover experiences

      By StingerZ16 · Posted

      I started with a folding cover by BAK PAC on my 2500. It went bad after close to 5 years. Bent and vinyl coming loose. Contacted BAK and they gave me a very good discount on a Revolver. Had it a number of years. Mostly outdoor storage. Some garage storage. Vinyl started to come loose. Still under warranty so they replaced to cover. Sold the 2500, bought the 1500 and got another revolver for it. Had it a couple years now and no issues. I store it indoors. Got a bit of discount when buying it as well. If you are seeing problems, contact BAK or real truck and let them know. Customer service was pretty good. But I think they changed their warranty.
    • Chuck FB
      Towing In Loose Gravel

      By Chuck FB · Posted

      I agree, there is no one answer fits all as every rig is different, one may be pulling some little aluminum fishing boat while another is towing a monstrosity that weighs a lot and hopefully the owner if the rig has some prior experience to know what drive mode they should choose.    It also struck me and this is from watching a few of those boat ramp escapades videos in the past, Ford being one of the vehicles that has the auto front axle hubs and sure enough its found out that one hub has crapped out and won't engage and may not have manual hubs to even select on both sides so they are on the boat ramp stuck with no four wheel drive and spinning .... they flat out need a tow to get up the ramp and deal with the vehicles new found issues. That can happen to all brands of pickup, finding out either four wheel drive or 4 low isn't working right at the time its needed it to work as some electronic crap has failed. 
    • Chuck FB
      Towing In Loose Gravel

      By Chuck FB · Posted

      Its possible you never had the joy of the crappy boat launches we tend to have around here or really some of them are just grades down to the river if its a river scenario and the conditions change all the time with the river levels and silt deposits. Some of the lakes we went to years ago, there was no such thing as a cement pad that went down into the water that the trailer stayed on, it was gravel maybe up to the water line and then duck crap much beyond that so sinking the boat tires into mud. Of course some of the more established lakes had a cement bar type boat ramp but sometimes it was covered in green slime closer and certainly within the water and a two wheel drive had all sorts of fun if one had to touch that slime with the rear tires.    A neighbor of mine had made a comment years back with his chev truck that was probably about the same year as yours but a half ton extended cab 4x4 and he a a fiberglass boat with an inboard so it wasn't a feather weight and he had gone out to one of the large popular lakes in the area and don't ask me how this happened but he was in two wheel drive as he figured he didn't require four wheel drive for that boat ramp and somehow upon pulling the boat out he twisted one of his drive axles. I suspect it must have spun and then grabbed on the cement ramp and shocked it to the degree of twisting it. He would have had the standard 8.5 or whatever it was axle housing as the 9.5 ring gear like my truck has also has larger drive axles as far as I know. Anyway he was feeling a vibration driving home and had it checked out and a shop found that the tire/hub was wobbling because of the axle had twisted so in went a new drive axle. After that bad experience he said he made sure to put it into four wheel drive to lower the stress on the rear axle. Of course that is where an HD truck can handle a lot more stress and no doubt these newer half tons with their larger ring gears probably have larger drive axles as well to match vs back in the day. 
    • asilverblazer
      2027 GMC Sierra: Official Discussion

      By asilverblazer · Posted

      Desirable - as in does someone WANT one, aspire to have one. Could reasonably buy any car they want and CHOOSE these instead.    I didn't watch the video, why did they win?

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...