Jump to content

Recommended Posts

Posted
On 3/27/2020 at 11:20 PM, Dunn said:

so its same as one this guy is selling for $50?....don't you need whole module and not just card?

 

or you can do this thru an SD card and not need module....kinda odd to sell a module if all you need is a card and programming,  whats the difference between them

Difference to install......easy-peasy!..... just get out your Scan Tool with a MDI, and (SPS-TIS2WEB) and EL-49642 SPS Programming Support Tool, somehow identify the unique access code for programming the SD card and follow the simple instructions for installation:

 

Silverado Navigation.pdf

 

 Here's packaging for the $449. SD card installation kit, above instructions have to be printed off by the dealer..

 

DSCN0909.JPG.b6b955a2678ec00d39cce46b3359cc6c.JPG

  • Replies 56
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Posted
17 minutes ago, Thomcat said:

Difference to install......easy-peasy!..... just get out your Scan Tool with a MDI, and (SPS-TIS2WEB) and EL-49642 SPS Programming Support Tool, somehow identify the unique access code for programming the SD card and follow the simple instructions for installation:

 

Silverado Navigation.pdf 296.82 kB · 4 downloads

 

 Here's packaging for the $449. SD card installation kit, above instructions have to be printed off by the dealer..

 

DSCN0909.JPG.b6b955a2678ec00d39cce46b3359cc6c.JPG

Thanks for the information. I thought if you bought SD card and had the update done on your vehicle it would work. 

Posted
On 3/28/2020 at 10:13 AM, MesaRat said:

not sure about the $50 card.  was told that i need a new module too and spoke with service and sales manager.  i also called another company i found online before i purchased for comparison and was same story for the LT trim 8" HD.  i will ask again on Monday - would kind of suck if it only needs a $50 card since i just paid $450.

You dont need module. Pleas review last post with instructions.

Posted

the link (and there are others out there) i posted swaps the module so that your SD reader on center dash is still free and as if it came from the factory, where as the $50 SD card offered by Tony has to stay plugged in to the dash card reader for operation. 

 

for $400 less i would have gone this route but i already paid for it when i bought the truck 2 weeks ago, it is in and from a 3rd party, and sales dept is now closed till 4/10.

Posted

Just curious why you wanted factory navigation, when android auto/apple continiously update, provide real time traffic,  speed traps, and much more and you don't have to do anything but plug in your phone?

Posted

Because I live very very rural, we don't even get USPS, UPS, FedEx or any other delivery service and at times my cell connection is not working..  Also, I go through long stretches of canyons, mountains, etc.  The in dash GPS uses a local data source for all map, addresses, etc and Satellite for traffic update.  Apple, android, etc. require a cell connection, especially if you want to reroute, etc. which has caused issues for me in the past.  

  • 3 weeks later...
Posted

I have a 2020 with IOS and want Nav.  The dealer couldn't find the SD card since GM quit supporting the upgrade.  I called a big dealer with an online parts store and they happened to have a card that came out of a vehicle wrecked in transport.  It's on its way to me.

 

Will this card work or is the card only a one-time use deal?  I also assume the dealer has to do the install?  

Posted
On 4/25/2020 at 2:30 PM, tbradleysr said:

I have them for sale for $50 each if you want one. Just email me at [email protected]. Part numbers below. 
84528704

84471303

So I bought a card from Tony but my dealer is clueless what to do. 
 

how do we get an authorization code the above instructions say we need.?

Posted (edited)
16 minutes ago, Dinozero said:

So I bought a card from Tony but my dealer is clueless what to do. 
 

how do we get an authorization code the above instructions say we need.?

 

You buy a leftover new GM kit if you can find one.  The code only comes with the kit.  pretty sure you might be out $50.    

 

Also, if those $50 cards are coming out of vehicles (used or even stolen), they are VIN locked and typically will corrupt if installed into another vehicle.  Because the retail price on those two p/ns "tony" is selling is $446/card.    

 

 

Quote

 

Note: Do not remove the SD Card with the ignition ON as this could corrupt the SD Card and cause navigation related errors.

Note: Do not swap SD Cards from vehicle to vehicle, SD Cards are VIN specific.

 

 

Edited by newdude
Posted
14 minutes ago, newdude said:

 

You buy a leftover new GM kit if you can find one.  The code only comes with the kit.  pretty sure you might be out $50.    

 

 

Also, if those $50 cards are coming out of vehicles (used or even stolen), they are VIN locked and typically will corrupt if installed into another vehicle.  Because the retail price on those two p/ns "tony" is selling is $446/card.    

 

 

 

I was afraid you would say that. 
 

I also bought some OEM fog lights, they were brand new unopened when I received them. 
 

Dealer says those should have an authorization number also but they didn’t come with any. 
 

 

seems like GM could provide an authorization code or even let you buy one. 

Posted
34 minutes ago, Dinozero said:

I was afraid you would say that. 
 

I also bought some OEM fog lights, they were brand new unopened when I received them. 
 

Dealer says those should have an authorization number also but they didn’t come with any. 
 

 

seems like GM could provide an authorization code or even let you buy one. 

 

Strange your fog kit didn't have them in it.  Did you buy the kit from your dealer?

 

To add on the card you bought for the nav.  That is the factory replacement card for an IOT radio, so a car/truck that was factory built with nav.  On your LT trim, the nav upgrade kit that has the authorization code in it, that code allows GM to release new calibration files that the dealer has to program into the truck for the instrument cluster, as well as the radio.   So that card even if it were brand new wouldn't work in your situation. 

 

Also, make sure your truck has the correct radio in the first place, the IOS radio.  

 

That website posted on the first page is your best bet unless you can find a factory upgrade kit. 

https://www.gm-navigation.com/shop/2019-chevy-silverado-factory-navigation-system/

Posted
13 minutes ago, newdude said:

 

Strange your fog kit didn't have them in it.  Did you buy the kit from your dealer?

 

To add on the card you bought for the nav.  That is the factory replacement card for an IOT radio, so a car/truck that was factory built with nav.  On your LT trim, the nav upgrade kit that has the authorization code in it, that code allows GM to release new calibration files that the dealer has to program into the truck for the instrument cluster, as well as the radio.   So that card even if it were brand new wouldn't work in your situation. 

 

Also, make sure your truck has the correct radio in the first place, the IOS radio.  

 

 

That website posted on the first page is your best bet unless you can find a factory upgrade kit. 

https://www.gm-navigation.com/shop/2019-chevy-silverado-factory-navigation-system/

Couple things updated. 
 

1. thankfully the fog lights did have the code. It was just small and didn’t see it on the one page that came with the items. 
 

2. they have told me I’m out of luck unless I want to buy a $400 card with the authorization code. 
 

I think I wasted $50

Posted

that sucks.....I just got my new truck and it has premium infotainment but not navigation....I may check it out later, the system is nicer than than the one on my RST....conv 2 pkg got me the better system

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,903
    Total Members
    8,960
    Most Online
    RyGuy43
    Newest Member
    RyGuy43
    Joined
  • Who's Online   2 Members, 0 Anonymous, 414 Guests (See full list)


  • Latest Articles

  • Posts

    • This is NOT impact damage nor neglect. There were previous class action lawsuits because of such paint preparation st GM manufacturing plant. Not just the Cherry Red Color. This paint is applied in three processes to obtain the desired color.  The manufacturer will cover for 36 months or 36k miles only. That rust is actually corrosion because of the paint process failure. Corrosion is covered for 100,100 miles or a certain months. However their corrosion doesn't include this type. Go figure. Clearly manufacturer knew from previous paint issues. This started 3 weeks ago out of the blue.  
    • Is it time to put a piece of tape over the CEL? 
    • consider doing electrical testing?  I would guess some power or ground wire/connection has a problem.   alldata.com has wiring diagrams, connector pinouts and diagnostic procedures you can use to find where the problem is.
    • can you tell if the reader is actually trying to get codes, and the pcm is reporting none, or is your reader just silently failing because it's not communicating with the pcm?
    • Any joy with this truck seems to be short-lived.   The CEL for P0172 ("bank 1" too rich) is now "intermittent".   I'm not sure where to check, or re-check, and my energy to keep chasing problems with junk is wearing thin. The P0172 seems to set as I'm coming to a stop, completely off the throttle, when fully warm. At least, that's what it's done the 3? times it's set.   Everything appears normal on the scanner EXCEPT long term fuel trim. There's only one bank on this vehicle because it's an OBD 1.5 with only one upstream O2 sensor. At idle, it's around -16.4% and will dip to -18% occasionally at idle or off-throttle. LTFT approaches 0 when throttle is held at 2500rpm. Short term appears normal, much closer to zero all the time. The LTFT tells me the engine is running rich at idle but compensating at higher load. But, why?   The EVAP purge valve doesn't appear to be leaking/sucking fuel vapor continuously. Is it sticking just as I come to a stop and the engine is choking on fuel vapor and sets the P0172? But that doesn't explain the persistently negative LTFT. Disconnecting the purge valve doesn't seem to make any difference.   I suppose that leaves another dang issue with the fuel injector. A leaking fuel pressure regulator, a new leak in the spider, or a leaking fuel injector/poppet valve I didn't see, or a small crack in one of the spider legs.   The vacuum line leading to the fuel pressure regulator doesn't have raw fuel in it. It doesn't even smell like fuel when it's pulled off, not until you suck air through it, then you can tell it leads to a fuel component. I'd consider that normal? Nothing is signaling this is a FPR issue from the outside, at least.   The oil smells like fuel but it's not building volume. I've noticed most oil in most engines smells like fuel to some degree so it's hard to say if the smell is an issue or not. Or if the engine just still smells like fuel because the crankcase was full of it a few hundred miles ago. But it's been changed twice since that original issue of the leaking fuel line dumping fuel into the intake.   Patience is running very thin. Every win seems to be accompanied by two steps backwards, or another issue that leads to removing at least the top half of the intake manifold. Enough! LOL
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...