Jump to content

First towing experience

greatmizzou
 Share

Recommended Posts

greatmizzou Enthusiast

greatmizzou

Posted
Posted (edited)

Seems like these threads are useful for people as the questions are always coming up.   2020 3500HD CrewCab Gas

 

Towed my Travel Trailer (7,000lb gvwr, probably around 5k-6k loaded weight) four hours distance on rolling hills.   Average mpg was about 10mpg.   The fuel tank and combined mpg made towing an easy going experience.  I towed for four hours and didnt even need to fill up before getting to the RV park.    
 

Issues:    I don't like the hitch ball camera, i find it is not as reliable as my "hitchin' stix". Its my first time but I just cant align it right using video only.   The sleeve 2" to 2.5" seems to have tons of play, didn't seem to cause any noticeable towing issues.  Not sure, but my dash would randomly detect no turn signal connection but everything seemed connected fine.  Sometimes the truck didnt recognize I had a trailer connected.  Did some unplugging and resetting and seemed to fix it.  And not surprisingly, parking and city navigating is not fun. Its doable, but its important to look at an area and pre-plan to realize parking garages and small busy parking lots are practically impossible to use.  This truck width wise will take up all of an average space and needs extra depth as it is quite long.

 

Positives:  engine braking in tow mode seemed rather  responsive.  Several times I wanted the engine to drop gears and it seemed to do it automatically.  A couple times it didn't, Im not entirely sure what triggers it but I liked it when it worked.   Cant compare it to the 6.0 4l80 but towing with this was such a dream compared to my 2002 1500.   I like the trailer app and running the light test before leaving.  The trailer brake gain was easy to adjust.  Visibility was good.  MPG was good.  I wasnt expecting miracles when towing a giant wall behind me.  I imagine the air resistance is primary stressor vs weight.  I didnt notice any unusual gear hunting.  Interior was super comfy, I have the optioned leather interior for LT trim.   Remote start was great to cool the interior down before getting in.  
 

I wondered if an HD truck was overkill for my trailer and I will deliver an emphatic NO.  A half to can tow it but its not a fun experience especially when you drive over a long distance.  Next trip will be to the mountains and Im really looking forward to it.  We will get a fifth wheel at some point in five years or so and its nice to know we made a good long term purchase.

 

(to preface this, I towed this same camper for two years with a 02' 1500  Ext cab 5.3 with towpackage)
 


 

 

 

F2D1F1B3-3C25-40C3-931D-D4B5973E88FF.jpeg

Edited by greatmizzou
  • Like 1
ShotgunZ71 Senior Enthusiast

ShotgunZ71

Posted
Posted
18 hours ago, greatmizzou said:

Seems like these threads are useful for people as the questions are always coming up.   2020 3500HD CrewCab Gas

 

Towed my Travel Trailer (7,000lb gvwr, probably around 5k-6k loaded weight) four hours distance on rolling hills.   Average mpg was about 10mpg.   The fuel tank and combined mpg made towing an easy going experience.  I towed for four hours and didnt even need to fill up before getting to the RV park.    
 

Issues:    I don't like the hitch ball camera, i find it is not as reliable as my "hitchin' stix". Its my first time but I just cant align it right using video only.   The sleeve 2" to 2.5" seems to have tons of play, didn't seem to cause any noticeable towing issues.  Not sure, but my dash would randomly detect no turn signal connection but everything seemed connected fine.  Sometimes the truck didnt recognize I had a trailer connected.  Did some unplugging and resetting and seemed to fix it.  And not surprisingly, parking and city navigating is not fun. Its doable, but its important to look at an area and pre-plan to realize parking garages and small busy parking lots are practically impossible to use.  This truck width wise will take up all of an average space and needs extra depth as it is quite long.

 

Positives:  engine braking in tow mode seemed rather  responsive.  Several times I wanted the engine to drop gears and it seemed to do it automatically.  A couple times it didn't, Im not entirely sure what triggers it but I liked it when it worked.   Cant compare it to the 6.0 4l80 but towing with this was such a dream compared to my 2002 1500.   I like the trailer app and running the light test before leaving.  The trailer brake gain was easy to adjust.  Visibility was good.  MPG was good.  I wasnt expecting miracles when towing a giant wall behind me.  I imagine the air resistance is primary stressor vs weight.  I didnt notice any unusual gear hunting.  Interior was super comfy, I have the optioned leather interior for LT trim.   Remote start was great to cool the interior down before getting in.  
 

I wondered if an HD truck was overkill for my trailer and I will deliver an emphatic NO.  A half to can tow it but its not a fun experience especially when you drive over a long distance.  Next trip will be to the mountains and Im really looking forward to it.  We will get a fifth wheel at some point in five years or so and its nice to know we made a good long term purchase.

 

(to preface this, I towed this same camper for two years with a 02' 1500  Ext cab 5.3 with towpackage)
 


 

 

 

 

Thanks for the review. I agree on the transmission shifting. Generally it does very well and downshifts promptly when needed, without losing so much speed up grades. I've used the grade braking a few times, but not enough to get a good feel of operation. I think something about tapping the brake pedal a few times will engage the engine braking? 

 

Many people wonder about mileage and weight, and I always tell them it's more about wind resistance than weight when pulling a camper. Stopping is an entirely different matter. The brakes on these trucks are good and the trailer brake system is as well, as you said.

  • 2 months later...
DeadManWalkin Enthusiast

DeadManWalkin

Posted
Posted

If you took that giant Route 66 sign off the roof of your truck you'd get better fuel mileage.  or at least put it on an angle like a deflector ?

  • Like 1
  • Haha 1
Dunn Senior Enthusiast

Dunn

Posted
Posted

yes its better to have more than barely enough...... bought it for payload but regardless it will always be more than i need and just make that process so much easier......it is a big truck for sure. coming from a late model 1500 its not even really comparable....these are towing and hauling machines.....my brother just bought one too and same deal his 1500 could do the job but 2500 just makes it so much easier and less stressful.....he said night and day difference.....plus they drive like a champ with the weight where the 1500 doesnt

unit Enthusiast

unit

Posted
Posted

Your fuel mileage seems too low for such a small trailer. I'm getting 12.5 to 13.5 towing a 30' Airstream that weighs 8,060 lbs more or less depending on how much water I have on board.

Pastusak.t Enthusiast

Pastusak.t

Posted
Posted
51 minutes ago, unit said:

Your fuel mileage seems too low for such a small trailer. I'm getting 12.5 to 13.5 towing a 30' Airstream that weighs 8,060 lbs more or less depending on how much water I have on board.

Damn!!! I can’t even get 13 unloaded around town. I’ve only got 700 miles on it but I’m averaging 10-11 city driving

JimCost2014 Senior Enthusiast

JimCost2014

Posted
Posted
2 hours ago, unit said:

Your fuel mileage seems too low for such a small trailer. I'm getting 12.5 to 13.5 towing a 30' Airstream that weighs 8,060 lbs more or less depending on how much water I have on board.

 

34 minutes ago, greatmizzou said:

I imagine towing the hotdog shaped airstream is more efficient?

The OP has the (thinking the 6.6) gas engine, unit has the Duramax, he will get better mileage in most cases.

unit Enthusiast

unit

Posted
Posted (edited)

I originally missed the gas blurb.

Edited by unit
Dunn Senior Enthusiast

Dunn

Posted
Posted
17 hours ago, Pastusak.t said:

Damn!!! I can’t even get 13 unloaded around town. I’ve only got 700 miles on it but I’m averaging 10-11 city driving

not even close to 13....8-10 in city mostly 8.....with a light foot as well

Londart2020 Enthusiast

Londart2020

Posted
Posted
On 8/21/2020 at 8:57 AM, Dunn said:

not even close to 13....8-10 in city mostly 8.....with a light foot as well

you may be doing something wrong..lol. I towed up to the mountain this weekend and got 10.8mpg. Around town with the Duramax I am getting 15-16mpg.

Dunn Senior Enthusiast

Dunn

Posted
Posted (edited)
7 hours ago, Londart2020 said:

you may be doing something wrong..lol. I towed up to the mountain this weekend and got 10.8mpg. Around town with the Duramax I am getting 15-16mpg.

gas engine  in the city and its computer telling me this

 

my city is full of lights and stop signs....on hwy i get almost 20mpg

Edited by Dunn
Chopperdoc New Member

Chopperdoc

Posted
Posted (edited)

My 2020 Diesel 3500HD Single rear get 9-11 MPG pulling my 43ft 16K 5th wheel ( Anderson hitch) up and down the hills of I65 near between Huntsville and Birmingham, AL. Great truck, towed on 3 trips with another  this coming weekend. It's much better than my 2013 RAM diesel 3500 did. I think the 8 ft. bed has a lot to do with it. My RAM had the short bed.

 

Edit:  It  is my daily driver and I get about 16MPG

Edited by Chopperdoc
Hagar68 Enthusiast

Hagar68

Posted
Posted

(  CHOPPERDOC:. I live in Decatur. )

 

20 Gasser getting 8.5 pulling a 8k lb trailer.  It's all about air drag, and that increases as the square of speed.  Faster you go, less the mpg.

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Gkistler
      2015 Sierra Denali L86 cyl 5 misfire at idle

      By Gkistler · Posted

      Hi friends - first time poster. I have a 2015 sierra Denali with 150k miles, I’m the second owner and she’s given me 75k of great service. I run a pulse AFM disable device. Starting Thursday when I exited the freeway after a short local ride it started idling rough, with an obvious misfire shake and was down on low end power.  I got it home and hooked it up to my scannner and found no codes but in live data a pretty bad misfire on cylinder 5. I replaced the coil, plug and wire with all new OE replacements (Delphi gn10165 coil, acdelco wire and 41-168 plug). It’s still behaving the same way after firing the parts cannon at it.   I know cyl 5 is a non AFM cylinder so I am not thinking this is AFM related but I’m kinda at a loss. injector? Bent pushrod? It’s running too well over 1k rpm to suggest those IMO. Has anyone chase this issue before and what was it? Any suggestions? 
    • zibzer2
      Pulsating Noise 4Cyl Mode

      By zibzer2 · Posted

      2017 Silverado L83 5.3l 6speed transmission Hello, not a new member but havent posted in a while and my old signup info isnt working so had to create a new account. anyways, I have an issue with my truck and hope someone can spread some light on whats happening: -when it goes to 4cyl mode it makes a clunk sound (but not when coasting or going downhill) -when in 4 cyl mode and under load it makes a load pulsating sound (not a tick). -goes away completely when in M5 gear or when plugging in an AFM delete. Im guessing it is one of 2 things but im not convinced of either to be honest. 1. lifter stuck in v8 mode 2. torque converter shudder realistically it doesn't seem like the TC as there is no physical vibration , and it never happens in v8 mode. but maybe? and wouldnt a lifter make a sound whether with load or not? any ideas let me know please. thank you!  
    • Chuck FB
      Some Assembly is Required

      By Chuck FB · Posted

      Which has made me wonder with the various engine failures of a few brands in the last few years, is it sub par materials such as lifters etc causing failures, or bearing clearances on the crank etc or perhaps bad designing of an engine physically or causing too much load on the components due to the hp/torque they can push out of them. Or is the oil viscosity and additive package of current oils or a lack of oil flow by an oil pump not able to supply sufficient oil at idle or under high load at low rpm. Or is it every item I listed that combined together has pushed the limits so far to the left that there is hardly a margin of safety left and add in some fuel dilution and too long of an OCI and premature engine failure is the result ?. 
    • Grumpy Bear
      Some Assembly is Required

      By Grumpy Bear · Posted

      He is not saying that an SAE *W20 will have more viscosity than a *W40 due to MORE VII polymers. He is saying that although multiple *W40 may post in the PDS the same or similar 100 C and 150 C viscosities that the blenders choice of modifier TYPE and AMOUNT to get his chosen base to grade will not give identical real world viscosities in shear and at temperature. All will pass the SII test but not all will pass the 100 C HTHS (unpublished value) testing the blender does and relies on to get the required by law "percentage improvement' referenced to his last great work.    Tis the problem with the lie. Once told others are required to support it. 
    • PunchT37
      Parking Brake - Automatic Engagement Questions

      By PunchT37 · Posted

      I have a `25, 1500 that auto sets on incline. Never knew that at first. I have the electronic shifter. Just think if it didn`t do that? Unlike a mechanical shift that you can muscle out of park, how would you get this thing out? That would be a problem.   What I found out later is, I don`t have to push the button to release. Just put it in gear.   Setting parameters? Don`t know if it`s possible.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...