Jump to content

Clogged AC drain

TMD
 Share

Recommended Posts

TMD Enthusiast

TMD

Posted
Posted

My 2019 LT (5.3) has a clogged A/C drain and it's going to require a dashboard removal to repair it. The service manager said it's going to be a 3-6 hour job and will be warrantied, but I'm not too happy about the inconvenience of the whole thing. I'm a little disappointed that it's happening on a truck with 13K miles and not too psyched about a dash removal. I'm concerned about problems in the future. Should I be worried about the repair? Anyone run into this problem yet?  

  • Replies 37
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

chadman
chadman

Interesting. They can usually be cleaned out through the drain hole. Would have to be something misassembled or misaligned with it being so new. Dash tear downs usually leave you with squeaks and ratt

batman900
batman900

Any way to prevent this from happening? Anyone have a pic of where to snake from if it does clog?

TMD
TMD

I have never had it happen on any other vehicle I have owned, so your guess is as good as mine. I drove less this spring because I ended up working from home - that might have had something to do with

Posted Images

chadman Enthusiast

chadman

Posted
Posted

Interesting. They can usually be cleaned out through the drain hole. Would have to be something misassembled or misaligned with it being so new. Dash tear downs usually leave you with squeaks and rattles. Good luck.

  • Like 1
BIGDOGx Senior Enthusiast

BIGDOGx

Posted
Posted (edited)
19 hours ago, TMD said:

My 2019 LT (5.3) has a clogged A/C drain and it's going to require a dashboard removal to repair it. The service manager said it's going to be a 3-6 hour job and will be warrantied, but I'm not too happy about the inconvenience of the whole thing. I'm a little disappointed that it's happening on a truck with 13K miles and not too psyched about a dash removal. I'm concerned about problems in the future. Should I be worried about the repair? Anyone run into this problem yet?  

Never had a clogged ac drain line in almost 3 decades of driving gm trucks. How a truck with only 13,000 miles has this happen is beyond me. Do you park it under a tree or bush that contentiously dumps on your truck or something?

 

As the previous poster said we have had a few members here have to have their dash ripped completely apart for other issues but the components and bolts and clips that hold it all together is immense. We all know those clips too are never as tight as when initially installed at the factory. Imo most plastic clips today should be one time use, once the stretch out, their effectiveness is very reduced imo and that is what will causes future rattles.

Edited by BIGDOGx
TMD Enthusiast

TMD

Posted
  • Author
Posted (edited)
9 minutes ago, BIGDOGx said:

Never had a clogged ac drain line in almost 3 decades of driving gm trucks. How a truck with only 13,000 miles has this happen is beyond me. Do you park it under a tree or bush that contentiously dumps on your truck or something?

 

As the previous poster said we have had a few members here have to have their dash ripped completely apart for other issues but the components and bolts and clips that hold it all together is immense. We all know those clips too are never as tight as when initially installed at the factory. Imo most plastic clips today should be one time use, once the stretch out, their effectiveness is very reduced imo and that is what will causes future rattles.

I do not park under a tree. I mentioned that I wasn't too happy about the prospect of having my dash torn apart, and he agreed that it's a bit much (no other way to get at it I guess). I'm going to let them know, kindly of course, that every squeak, rattle, or other annoying sound coming from my dash from here on out is going to require attention. 

Edited by TMD
BIGDOGx Senior Enthusiast

BIGDOGx

Posted
Posted
26 minutes ago, TMD said:

I do not park under a tree. I mentioned that I wasn't too happy about the prospect of having my dash torn apart, and he agreed that it's a bit much (no other way to get at it I guess). I'm going to let them know, kindly of course, that every squeak, rattle, or other annoying sound coming from my dash from here on out is going to require attention. 

I wish you luck, to have some piece of mind one of those guys on here who did have his dash taken apart did comment that the tech did a rather good job of reassembling it and doesn't think it will be an issue down the road.

BlancoSilverado Enthusiast

BlancoSilverado

Posted
Posted

The drain exit is on top of the trans towards the passenger side,

 

I had the same problem. i ended using ozium for the mold and pushing some air though the exit hole (multiple times). 

ejdziurka Enthusiast

ejdziurka

Posted
Posted
On 7/1/2020 at 3:40 PM, TMD said:

My 2019 LT (5.3) has a clogged A/C drain and it's going to require a dashboard removal to repair it. The service manager said it's going to be a 3-6 hour job and will be warrantied, but I'm not too happy about the inconvenience of the whole thing. I'm a little disappointed that it's happening on a truck with 13K miles and not too psyched about a dash removal. I'm concerned about problems in the future. Should I be worried about the repair? Anyone run into this problem yet?  

Besides not seeing water dripping from the truck, what are the symptoms of a plugged drain?  I only ask as my truck is going in for the 4 time for AC issues.  13,000 miles as well.

TMD Enthusiast

TMD

Posted
  • Author
Posted
18 minutes ago, ejdziurka said:

Besides not seeing water dripping from the truck, what are the symptoms of a plugged drain?  I only ask as my truck is going in for the 4 time for AC issues.  13,000 miles as well.

The only real symptom is water draining onto the floor of the passenger side... It must be getting trapped, pooling up, and then draining when I turn left. It sort of makes a sizzling sound because it's draining through the hot blower motor (which I'm sure will fail now too). Everything else seems to be fine. The A/C is still nice and cold. 

TMD Enthusiast

TMD

Posted
  • Author
Posted
On 7/2/2020 at 12:24 PM, BlancoSilverado said:

The drain exit is on top of the trans towards the passenger side,

 

I had the same problem. i ended using ozium for the mold and pushing some air though the exit hole (multiple times). 

Interesting. I'm not sure why the techs couldn't do that instead of removing my dash?? 

  • 2 weeks later...
GF7PE Enthusiast

GF7PE

Posted
Posted

I thought I was the only one. Just got mine back from the dealer after 10 days. Truck has less than 4000 miles on it. My issue wasn’t a clogged drain but no hole cut in firewall for the drain to go through.


Sent from my iPhone using Tapatalk

TMD Enthusiast

TMD

Posted
  • Author
Posted

Update: The techs accessed the drain from the engine side of the firewall. They removed the intake manifold and were able to snake the line... He said about a gallon and a half of water pissed out after they snaked it. Best possible outcome, I guess. I was pretty anxious about having my dashboard removed. Everything seems fine now... Well, everything's fine with the A/C - I'm sure another gremlin will pop its head up soon enough. 

GF7PE Enthusiast

GF7PE

Posted
Posted
Update: The techs accessed the drain from the engine side of the firewall. They removed the intake manifold and were able to snake the line... He said about a gallon and a half of water pissed out after they snaked it. Best possible outcome, I guess. I was pretty anxious about having my dashboard removed. Everything seems fine now... Well, everything's fine with the A/C - I'm sure another gremlin will pop its head up soon enough. 

Lucky. Mine was completely ripped out and have only had it for 4 months. Seems ok so far and other than a bunch of fingerprints on the center of the windshield


Sent from my iPhone using Tapatalk
batman900 Enthusiast

batman900

Posted
Posted

Any way to prevent this from happening? Anyone have a pic of where to snake from if it does clog?

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • zibzer2
      Pulsating Noise 4Cyl Mode

      By zibzer2 · Posted

      2017 Silverado L83 5.3l 6speed transmission Hello, not a new member but havent posted in a while and my old signup info isnt working so had to create a new account. anyways, I have an issue with my truck and hope someone can spread some light on whats happening: -when it goes to 4cyl mode it makes a clunk sound (but not when coasting or going downhill) -when in 4 cyl mode and under load it makes a load pulsating sound (not a tick). -goes away completely when in M5 gear or when plugging in an AFM delete. Im guessing it is one of 2 things but im not convinced of either to be honest. 1. lifter stuck in v8 mode 2. torque converter shudder realistically it doesn't seem like the TC as there is no physical vibration , and it never happens in v8 mode. but maybe? and wouldnt a lifter make a sound whether with load or not? any ideas let me know please. thank you!  
    • Chuck FB
      Some Assembly is Required

      By Chuck FB · Posted

      Which has made me wonder with the various engine failures of a few brands in the last few years, is it sub par materials such as lifters etc causing failures, or bearing clearances on the crank etc or perhaps bad designing of an engine physically or causing too much load on the components due to the hp/torque they can push out of them. Or is the oil viscosity and additive package of current oils or a lack of oil flow by an oil pump not able to supply sufficient oil at idle or under high load at low rpm. Or is it every item I listed that combined together has pushed the limits so far to the left that there is hardly a margin of safety left and add in some fuel dilution and too long of an OCI and premature engine failure is the result ?. 
    • Grumpy Bear
      Some Assembly is Required

      By Grumpy Bear · Posted

      He is not saying that an SAE *W20 will have more viscosity than a *W40 due to MORE VII polymers. He is saying that although multiple *W40 may post in the PDS the same or similar 100 C and 150 C viscosities that the blenders choice of modifier TYPE and AMOUNT to get his chosen base to grade will not give identical real world viscosities in shear and at temperature. All will pass the SII test but not all will pass the 100 C HTHS (unpublished value) testing the blender does and relies on to get the required by law "percentage improvement' referenced to his last great work.    Tis the problem with the lie. Once told others are required to support it. 
    • PunchT37
      Parking Brake - Automatic Engagement Questions

      By PunchT37 · Posted

      I have a `25, 1500 that auto sets on incline. Never knew that at first. I have the electronic shifter. Just think if it didn`t do that? Unlike a mechanical shift that you can muscle out of park, how would you get this thing out? That would be a problem.   What I found out later is, I don`t have to push the button to release. Just put it in gear.   Setting parameters? Don`t know if it`s possible.
    • SoCal Angler
      Parking Brake - Automatic Engagement Questions

      By SoCal Angler · Posted

      2023 GMC 3500 HD, SLE, 6.6L Gas, 4x4, 6 Spd Options:  SLE Convenience Package; Driver Alert Package 1; Spray on Bedliner; X31 Off Road Package; TRAILERING MIRRORS, HEATED POWER -ADJUSTABLE, AUTO DIMMING, WITH TURN INDICATORS WHEELHOUSE LINERS, REAR INC. REAR AXLE - 3.73 RATIO INC. GVWR, 11,350 LBS. (5148 KG) INC. FRONT AND REAR PARK ASSIST, INC. ULTRASONIC     I have been launching my new boat and noticed some things related to the parking brake.. I usually set the parking brake (habit) when on flat ground for typical driving.    When backed down on the launch ramp to launch the boat and I place gear selector into Park, the parking brake activates automatically. My second nature is to set parking brake manually and noticed I was turing the parking brake off.  The parking brake appears to be setting itself automatically.   I looked all over my owner's manual and only found references to being on an incline and manually setting parking brake, or at times parking brake will be auto engaged, but nothing specific to my situation.    When is the parking brake automatically engaged?  Under what specific circumstances?  Can the auto set parameters be changed?     I like the auto set feature.  It would be nice if always engaged when shifted into Park and released when shifted out of Park (like my wifes 2025 RAV4).   Thanks!    

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...