Jump to content

Auto stop/start system usage  

155 members have voted

You do not have permission to vote in this poll, or see the poll results. Please sign in or register to vote in this poll.

Recommended Posts

Posted

What do you think of the auto stop/start system in these trucks? I'm curious how many just leave it enabled in the default setting or turn it off every time. 

Posted
What do you think of the auto stop/start system in these trucks? I'm curious how many just leave it enabled in the default setting or turn it off every time. 
I'm one of the ones that turns it off everytime. If there was a way to permantly disable it, I'd do it.

Sent from my SM-N975U using Tapatalk

Posted

I disable it almost all of the time as a part of my pre-flight checklist. Some exceptions though. If I’m pulling up to the drive thru I re-enable it before stopping. Makes it easier to hear the clerk and saves some idle time too when things are slow. Play it right and you can get two auto-stops out of it. One at the speaker box and one at the window. 
 

Also if I’m coming up to one of the notorious 5 minute stoplights I’ll re-enable.

 

That’s about it though. Most of the time it’s off. I read somewhere that the break even for fuel consumption is 30 seconds. That is, if it shuts off for less than that amount of time, it’s actually wasting more fuel during restart than it saved by shutting off. Most stop signs and lights are shorter than 30 seconds so there’s that.

  • Like 1
Posted

I do exactly what OnTheReel does. 
 

I’ve watched quite a few of the videos of guys installing the Auto stop eliminator. I don’t know, I guess I’m just not motivated enough to do all that. 
 

To me, it’s just like clicking in my seat belt or adjusting the AC. Doesn’t bother me to push that button every time, and I do enjoy having it for those long stoplights. Why not. 

Posted
3 minutes ago, Andyh1 said:

Looks like it stays plugged into your OBD port... Unplug when to take it back to stock function. Interesting but comes at a price. Thanks for the share


Sent from my SM-N975U using Tapatalk
 

It works well.

Posted

I disable it, usually at the first stop sign/traffic light.  Im just happy we have a disable button.  If the government geeks/libs get their way, we will have no disable button on future models.  My opinion is that it creates needless wear/tear and saves very little, if any, fuel.   

Posted

Added the Range Technology module after a week of having the truck. Made things so much nicer being able to just move off the stop light without the delay.

Sent from my SM-G988U1 using Tapatalk

Posted

Don't really like it so I've pressed the button to disable it each time (on this truck and on previous trucks). Then installed the eliminator so it recognizes it as off full-time and it's been wonderful.

 

I would equate the eliminator install similar to spraying a squeeky door hinge with wd40. While none of it is earth shattering business, after dealing with a squeeky door for months... the second you close that door in silence without the squeek you think "why the heck didn't I do this sooner?" The same is said for the auto stop eliminator!

  • Like 4
Posted

So spend $180 on the range device, studies show around $179 savings at 15k miles a year at $3.50 a gallon annually so basically first year just pissing away $350 the first year and an additional $720 the next 4 years. That means it can save you enough to buy a nice hard rolling tonneau cover, especially if you are in stop and go or city traffic often. Not sure why people dislike this or other fuel saving tech, multiple independent test have shown around 7-8% fuel savings with start stop tech on average. I am all for it, we can't avoid it so might as well embrace it as trying to get around some of the stuff can be even more expensive. 

 

Tyler 

  • Like 3
Posted

Installed the auto stop kit last week. Seem to me totally changed the truck no more bullshit shut off at stops and forgetting to turn the dam thing off. Very easy install could not worked out better. 

  • Like 1
Posted
23 minutes ago, amxguy1970 said:

So spend $180 on the range device, studies show around $179 savings at 15k miles a year at $3.50 a gallon annually so basically first year just pissing away $350 the first year and an additional $720 the next 4 years. That means it can save you enough to buy a nice hard rolling tonneau cover, especially if you are in stop and go or city traffic often. Not sure why people dislike this or other fuel saving tech, multiple independent test have shown around 7-8% fuel savings with start stop tech on average. I am all for it, we can't avoid it so might as well embrace it as trying to get around some of the stuff can be even more expensive. 

 

Tyler 

Totally fair points above. I got the auto stop eliminator for half that range device price though. I'm genuinely curious about those studies though because I haven't looked into them at all. Estimate is roughly 1 gallon of fuel savings per 300 miles driven on average? savings definitely changes with fuel price changes (we're sub $2 here). How are those 15k miles distributed too? This only works in a stop and go environment like in the city or Los Angeles highway LOL  15,000 miles is a lot of city stop and go driving so I'd suspect that study would be under a "normal" uses of city/combo driving which would support more savings for less miles but in city environment. I'm naturally a skeptic but I just feel 50+ gallons of fuels savings seems a little high

 

All very interesting in my opinion, 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,804
    Total Members
    8,960
    Most Online
    LCH14
    Newest Member
    LCH14
    Joined
  • Who's Online   1 Member, 0 Anonymous, 1,393 Guests (See full list)


  • Latest Articles

  • Posts

    • I'd change the fluid and start there.   198F is nothing for the 8L90.  They typically operate 180-200F stock.  
    • Looking for help!   2019 GMC Sierra 1500 - 5.3l 4x4 8l90 61k miles - truck is in Arizona, was over 110 outside on Monday when this whole situation transpired. Never had any major issues with transmission until this point:   Truck sat outside my construction office for approx 1 hour idling before I realized, ran around the job site wrapping some things up for the day and then left. Went to get food and sat in the drive through for approx 30 minutes idling. As soon as I pull out of the drive through and onto the main road, rear tires lock up and feels like transmission fell out of the truck. Shifted to park, shut the truck off and tried again, same thing happened. Was able to reverse into parking lot (truck slammed into reverse). Let the truck sit turned off for 10 minutes before trying again, but it continued to happen. Towed truck back to my house. Highest the trans temps reached was 198.   Friday, after work I start looking into the situation. Truck sat in my driveway untouched all week. Truck is now driving like normal, transmission doesn’t get over 185 degrees when trying to heat it up. Got up to 60 multiples times with no issues, no issues accelerating, only down shifted hard into first one time at 185 degrees. Does anyone have any insight? Never through a code or a check engine light. Truck has never been used to tow either. No transmission services at this point.
    • Atlas won.   I know better, but I did it anyway. I took a compressed air line with a chuck and rubber tip and jammed it in the open EGR port. The port was clear as far as I could see, and as far as I could poke with a flexible wire, but that doesn't mean it's not clogged.   Compressed air blew back at me along with a cloud of black. Oops. I didn't have the rubber tip seated in there all the way. Jammed it up in there some more and squeezed the chuck. PSI was set to 120. Poof! It blew back at me again. Third time...pfffffttssssssspffffffsssfffffff, face full of carbon, and then, kind of a thud..and the air stopped spraying back at me. It was now exiting the exhaust with a low shhhhhh sound as it flowed through the pipe. Something broke free. I pressurized the port again, and air flowed.   Made my day.   Long story short on this problem, it's fixed. Something was really blocking the EGR passages down low, and compressed air blew it apart. I don't recommend this as who knows what debris was sent where. But it's allowed me to move forward, mentally, and onto the next problems I need to get this little S-Blazer going down the road properly again.  
    • Your truck lowered, looks good. I'm happy with the stance on this. I may need the extra ground clearance given my location/situation.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...