Jump to content

Recommended Posts

Posted

I have a Brownstone Metallic 2015 Silverado built at the Flint plant in May 2015. The truck has 52,000 miles and has been sometimes driven on gravel roads.  I must have got lucky, my paint looks like new everywhere, not even one rock chip. I have never had a vehicle with a better paint job.

 

Dave

Posted
On 9/9/2020 at 10:08 AM, DeltaTek said:

I’m also having the same issue in the same spot, having the dealer look at it today, if they say no then there should be a class action lawsuit against the company for defective paint. Just saying.

9A8C1290-00AB-4E4B-AFEE-82D1266A8143.jpeg

Let me know what the dealership says. 

Posted
On 9/11/2020 at 1:44 PM, dgstarr63 said:

I have a Brownstone Metallic 2015 Silverado built at the Flint plant in May 2015. The truck has 52,000 miles and has been sometimes driven on gravel roads.  I must have got lucky, my paint looks like new everywhere, not even one rock chip. I have never had a vehicle with a better paint job.

Same year, same colour, same luck. but Sierra built in Mexico.  It is strange why some peel and flake while most don't. Maybe the cause is a result of factors after the vehicle was built.  

  • 7 months later...
Posted

I have a 14 Sierra that’s the same color as yours and the paint is flaking off in the same spot on both rear doors. 

  • 1 month later...
Posted

I have a '14 Sierra and it is doing the same of both doors, the hood from rock chips, and the bed of the truck is peeling like crazy. 

 

It is Metallic Silver. I recommend anyone looking at buying a used '14 Sierra RUN as fast a possible because the paint job of these trucks is horrible. 

 

I have tried to mitigate this the best I can with touch up paint and covering the affected areas to prevent it from spreading but it is only a matter of time before that happens. 

 

I love the truck and mechanically the truck is sound but I am severely disappointed in the GMC paint job. 

Posted

When you try and fix it use the GMC Paint Touch Up. Do NOT use Touch Up Direct as it will ruin the paint and not match. I used TouchUpDirect and then went on top of it with the GMC paint and it looks horrible. It made the paint "wrinkle" up. Here are some pics and maybe you can learn from my mistakes. 

 

truck6.thumb.jpg.457761d42fab28ca839a59461b69b088.jpg

truck5.jpg

truck7.jpg

Posted

I have a 2014 Summit White that is peeling as well. Same spot on both rear doors and dead center of the cab about 2 inches back from the windshield. Several small places on the front end but I have not ruled out rock chips for these.

  • 1 month later...
Posted

Yep, 14 Blue Topaz metallic, Drivers side rear door, same place, starts at the bottom of the window and goes up about 3 inches and a inch wide. I'd say manufacturing/Paint shop problem.

  • 3 weeks later...
Posted
 

Anyone else having issues with the paint peeling off your truck?  My 2014 has started to peel and when I contacted GMC they said it was my problem and refused to help fix it.  The dealership wants $1700 to paint the entire door.  I haven't even owned the truck four years.  Any advice would be greatly appreciated.

GMC1.jpg

GMC3.jpg

GMC2.jpg

GMC.jpg

I have a 2014 Sierra that has this same problem, same spot. I called and was told they couldn’t do anything about it. 
Apparently, their is an issue with this model in that area of the vehicle. I am totally disappointed as I purchased new and paid extra 1,000 for this color.

Posted

Exactly the same thing happening to me.  Drivers side door- same spot.  Not sure what I'm gonna do.

  • 2 weeks later...
Posted

Dealership told me it wasn’t their fault and told me to go to their service department to get an estimate. Painter at the service department told me it’s an e-coat issue that doesn’t allow the paint to bond correctly. 
 

Same issue on my door. Now seeing it on the hood and around the front windshield. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I have a 2000 Silverado 1500 LS, whenever I put it into reverse and also in drive it clunks, the truck also feels sluggish when driving. Any advice/ideas ?
    • Looks like it's riveted to me. What is wrong with that 1? Welcome to the Forum!
    • Missing pieces of the Assembly   Detergency vs Solvency   Not the same thing. Detergency is the mechanism that surrounds solid particulates preventing amalgamation. Usually accompanied by a Dispersant whose job it is to keep those encapsulated particles in Suspension. Solvency keeps things that can be dissolved in solution.    Salt is a solid that can be dissolved. Pepper is a solid that cannot be dissolved. A detergent/dispersant is effective on pepper but a solvent is more effective on salt. As long as the solids remain in either state, dissolved or dispersed then they can be be removed with the oil upon change.    How many wranglers does it take to herd cats? Depends on how many cats your herding. How much sponge does it take to soak up water? How much water is there to soak up? Point is most oil blends start with some herding ability and next to zero sponge and recently even fewer wranglers are being sent to do the same job.    So you start with a dozen cowboys and zero cows but at the drive progresses you pick up cows along the way, but not cowboys. At some point you have more cows that the wranglers can handle and some leave the herd. Deposits. And the API has an acceptable number of cows they are willing to let loose. In the ideal world zero is the right number for he rancher but to the butcher....a few lost is fine. This cow is beat to death. Let's move on....   Solvency isn't something oils on the Walmart shelf care about AT ALL. Problem is, you motor does. Fuels driven varnish sticks rings and only a solvent can keep them in check. The bet is that the solids driven portion that plug the expander rings and the oil drain backs and VVT screens and AFM screens will be an issue long before varnish is. Not that it wont be but if they market well enough the consumer can be kept ignorant enough to either believe it is "normal" (A quart in 1 or 2K is normal) OR is kept at bay longer than the first owner is likely to hang on to the unit. Solvency cost money.    Now the OEM's have John Q. Public buffaloed into the belief that the number cows accumulated along the trail is a known and predictable CONSTANT. It isn't. Nor is the rate at which they crossed paths with them. Only the number of wrangles is constant. Or was. Each new generation of oil sees fewer and fewer of them.    So what happens when the number of cowboys is lower (lower TBN) with each seasons trail but the trial is longer (OCI) and the number of cows along that trail continues increase? (Conditions that promote deposits).    For awhile the blenders were on to something. Better bases are harder to degrade (fewer cows) but that was overtaken by a longer trail (OCI) and improved breeding (More cows) while continuing to reduce the cowboy staffing levels (TBN/Aniline #).    Marketing has been successful. We've fired most of the staff, cows breed line bunnies, the trail is ten times longer and we've convinced the boss his ranch is in better shape that it ever was.    That kids is just the cleaning side. The side few pay attention to.     
    • Mann+Hummel since 1941 per their web site 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...