Jump to content

Overhead Console Compatability

zibzer
 Share

Recommended Posts

zibzer Enthusiast

zibzer

Posted
  • Author
Posted
On 10/26/2020 at 3:45 PM, rav3 said:

I have an early 2017 & has the soft open glasses compartment too but mine fit in it fine. I didn't know they changed it in 2018. I think they list the same part nos. depending on the options (Homelink, rear glass slider, sunroof, etc.) Mines a LTZ double door, so no sunroof.

Console wglasses.jpg

Console woglasses.jpg

Console.jpg

I have 2018-19 console on order (1-2 week delivery from the GM dealer) and will verify once it comes in. Part number 84456893. The details show it will only fit 2018-2019 1500s but hopefully it works in my 2017 as pgamboa suggests. 

  • Replies 31
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

BlkSS
BlkSS

The 2015-2017 SUV OH console with the mirror fits as I put one in my 2016 Silverado.  If my records are correct, the part number was 23161771 but I'd have to pull it to be 100% correct.  Since it's a

zibzer
zibzer

I will likely order mine this week now that I know it will fit. I will take pictures and post them in this thread.

zibzer
zibzer

I finally got around to swapping my overhead console. Here are some pictures comparing the 2014-17 overhead console to the 2018-19 console. As you can see, the sunglasses compartment is considerably l

Posted Images

pgamboa Senior Enthusiast

pgamboa

Posted
Posted
Subbed for results. If you wouldn't mind post the old and new part numbers for people who stubble onto this thread later and for us to know which one we have and what we need. Cheers man, stoked.

Side note I've always wanted the overhead console one with the mirror from the suburban to see if that'll fit.[mention=159655]pgamboa[/mention] any trial and error with that one?

Sent from my SM-G986U1 using Tapatalk



I had 4 different SUV/Truck overhead consoles and could not Frankenstein a truck version with the mirror. Reason is the center plate is different in size. I didn’t want to have to cut/modify anything but the overall console is the same size. The center plate is different.


Sent from my iPhone using Tapatalk
VanguardK2 Enthusiast

VanguardK2

Posted
Posted

Damn... Thanks for the explanation Phil!

 

I have wanted that mirror one in my truck since I bought it, kills me I can't get it but of the 50 million things we can modify on these trucks with other factory parts, center mirror not being one of them I can live with it.

 

O.P: can you post comparison pics once you get it in the mail? Still curious how big the difference will be

 

Sent from my SM-G986U1 using Tapatalk

 

 

 

 

BlkSS Enthusiast

BlkSS

Posted
Posted
10 hours ago, pgamboa said:


I had 4 different SUV/Truck overhead consoles and could not Frankenstein a truck version with the mirror. Reason is the center plate is different in size. I didn’t want to have to cut/modify anything but the overall console is the same size. The center plate is different.


Sent from my iPhone using Tapatalk

 

8 hours ago, VanguardK2 said:

Damn... Thanks for the explanation Phil!

 

I have wanted that mirror one in my truck since I bought it, kills me I can't get it but of the 50 million things we can modify on these trucks with other factory parts, center mirror not being one of them I can live with it.

 

O.P: can you post comparison pics once you get it in the mail? Still curious how big the difference will be

 

Sent from my SM-G986U1 using Tapatalk

 

 

 

 

The 2015-2017 SUV OH console with the mirror fits as I put one in my 2016 Silverado.  If my records are correct, the part number was 23161771 but I'd have to pull it to be 100% correct.  Since it's a single compartment, the center panel swaps right over along with the harness.

20201028_073442.jpg

  • Like 3
pgamboa Senior Enthusiast

pgamboa

Posted
Posted
The 2015-2017 SUV OH console with the mirror fits as I put one in my 2016 Silverado.  If my records are correct, the part number was 23161771 but I'd have to pull it to be 100% correct.  Since it's a single compartment, the center panel swaps right over along with the harness.
20201028_073442.thumb.jpg.9d9b997f9a5342ed7c1319d19e626582.jpg

This is exactly what i wanted. For some reason, my center plate wouldn’t transfer :(. Good to know it can be done!


Sent from my iPhone using Tapatalk
  • Like 1
VanguardK2 Enthusiast

VanguardK2

Posted
Posted
The 2015-2017 SUV OH console with the mirror fits as I put one in my 2016 Silverado.  If my records are correct, the part number was 23161771 but I'd have to pull it to be 100% correct.  Since it's a single compartment, the center panel swaps right over along with the harness.
20201028_073442.thumb.jpg.9d9b997f9a5342ed7c1319d19e626582.jpg
Nooooo Way!!!!!!

That is awesome I will check into that part number for sure.

Thanks so much for the post man!

Sent from my SM-G986U1 using Tapatalk

laughey Enthusiast

laughey

Posted
Posted

Maybe my googling skills aren't up to par this early in the AM, but that part # doesn't seem accurate? Or maybe the online resources I'm using don't carry it. Any chance you can double-check? Much appreciated.

VanguardK2 Enthusiast

VanguardK2

Posted
Posted
Maybe my googling skills aren't up to par this early in the AM, but that part # doesn't seem accurate? Or maybe the online resources I'm using don't carry it. Any chance you can double-check? Much appreciated.

So last night I was having the same problem, but a member here sent me an eBay link. I searched the part numbers database and there was a superseded part number. One you can search for is 84083238. Haven’t 100 percent confirmed fitment for this exact one, but it’s the one I will be buying here soon. Good luck
laughey Enthusiast

laughey

Posted
Posted
33 minutes ago, zibzer said:

Is this the part # you are confused about? 84456893?https://www.gmpartsxperts.com/oem-parts/gm-console-assembly-84456893

 

 

 

 

That's the one for the 'rados and 'erras, 2018-2020 era, yes, but the fella a few posts back mentioned using the OH console from a GM SUV...the SUV format includes the conversation mirror (hey now, that's what it's called)...which is what I'm looking for.

laughey Enthusiast

laughey

Posted
Posted
2 hours ago, VanguardK2 said:


So last night I was having the same problem, but a member here sent me an eBay link. I searched the part numbers database and there was a superseded part number. One you can search for is 84083238. Haven’t 100 percent confirmed fitment for this exact one, but it’s the one I will be buying here soon. Good luck

I saw that one too, but it's got that tailgate lift knob on it. Maybe I misunderstood @BlkSS but I'm thinking he swapped the entire console panel thingy (not just the mirror and sunglasses flip down). ?

 

@pgamboa, can you work your magic and retro the knob on this for a pickup?  ?

laughey Enthusiast

laughey

Posted
Posted
17 hours ago, BlkSS said:

 

The 2015-2017 SUV OH console with the mirror fits as I put one in my 2016 Silverado.  If my records are correct, the part number was 23161771 but I'd have to pull it to be 100% correct.  Since it's a single compartment, the center panel swaps right over along with the harness.

20201028_073442.jpg

For clarity, did you swap the entire OHC or just the mirror/shades flippy thing? Also, is that a rear power slide lever/switch on the RH side of the OHC? I'ma say "YEAH" -- the reflection in said mirror suggests 3 panes o' glass.  ?

Untitled.png

VanguardK2 Enthusiast

VanguardK2

Posted
Posted

It's the center panel where the switches and knobs are

 

Sent from my SM-G986U1 using Tapatalk

 

 

 

 

 

d27e4e73b92c20f0ffa800b21cc4ecf2.jpg

BlkSS Enthusiast

BlkSS

Posted
Posted

@laughey I removed my original OH console and removed the center panel along with the harness and installed those parts into the 15-17 SUV OH console as I removed those parts from it and installed the SUV OH console with the pickup center panel and harness. 

 

And yes that is the switch for the power sliding rear glass.

  • Like 1
laughey Enthusiast

laughey

Posted
Posted
18 hours ago, BlkSS said:

@laughey I removed my original OH console and removed the center panel along with the harness and installed those parts into the 15-17 SUV OH console as I removed those parts from it and installed the SUV OH console with the pickup center panel and harness. 

 

And yes that is the switch for the power sliding rear glass.

@BlkSS Ah ha, so it's sorta like Legos! Groovy. Thank you for the details/specifics.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • newdude
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By newdude · Posted

      No such thing as regenerative braking on a pure ICE vehicle.     Regenerative braking is the re-capture of energy from electric motors and stores it in the battery pack.  So hybrids, PHEV and EVs have regenerative braking.     What you are seeing is the charging system changing modes is all.  Its likely entering charge mode for some sort of reason is all.  All of the charging modes will be listed below.   As for L10 vs D.  L10 turns off automatic grade braking.  L10 puts you in control of grade downshifts where in D it will automatically do it based on brake pedal position and other factors.  Otherwise L10 and D drive exactly the same aside from that one aspect.    Battery Sulfation Mode The BCM will enter this mode when the interpreted Generator output voltage is less than 13.2 V for 45 minutes. When this condition exists the BCM will enter Charge Mode for 2–3 minutes. The BCM will then determine which mode to enter depending on voltage requirements.   Charge Mode The BCM will enter Charge Mode when ever one of the following conditions are met:   Windshield wipers are ON for more than 3 s. Climate Control Voltage Boost Mode Request is true, as sensed by the HVAC control module via serial data. High speed cooling fan, rear defogger, and HVAC high speed blower operation can cause the BCM to enter the Charge Mode. The estimated battery temperature is less than 0°C (32°F). Battery State of Charge is less than 80%. Vehicle speed is greater than 145 km/h (90 mph) A current sensor malfunction exists. System voltage is determined to be below 12.56 V When any one of these conditions is met, the system will set targeted generator output voltage to a charging voltage between 13.9–15.5 V, depending on the battery state of charge and estimated battery temperature.   Fuel Economy Mode The BCM will enter Fuel Economy Mode when the estimated battery temperature is at least 0°C (32°F) but less than or equal to 80°C (176°F), the calculated battery current is less than 15 A and greater than −8 A, and the battery state-of-charge is greater than or equal to 80%. Its targeted generator output voltage is the open circuit voltage of the battery and can be between 12.5–13.1 V. When fuel economy mode is active, the generator is not charging, only maintaining open circuit battery voltage. The BCM will exit this mode and enter Charge Mode when any of the conditions described above are present.   Headlamp Mode The BCM will enter Headlamp Mode when ever the head lamps are ON (high or low beams). Voltage will be regulated between 13.9–14.5 V.   Start Up Mode When the engine is started the BCM sets a targeted generator output voltage of 14.5 V for 30 s.   Tow/Haul Mode (if applicable) Pressing the Tow/Haul Mode button located on the center stack, the vehicle system voltage is raised and the remote (non-vehicle) battery will be charged. Having the headlamps on will raise the system voltage and if the Tow/Haul button is applied it will not serve any purpose. The voltage is regulated between 13.9-14.5 V.      
    • jaszr2
      Active Grille Delete

      By jaszr2 · Posted

      Hello from Australia Just sharing that there is now a way to delete the active shutters entirely with just a plug in module. Opens up tons of room to light bars etc.
    • jake111
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By jake111 · Posted

      I have an observation and a question... 1) I watch the voltage closely because I have had to dial in the cut-in/cut-out voltages of the battery separator to my camper.  The "smart" charging drives me nuts.  Anyway, I noticed that when coasting for a while, and especially if lightly using the brakes (though not necessary), the voltage goes up from mid/high-13 volts to mid/high-14 volts.  Then it drops back down after stopping or going again.  Consistently!   The only explanation I can come up with is REGENERATIVE BRAKING!  Well, maybe that's a little bit of an exaggeration, but it's certainly free extra battery charging.   2) Driving on mountain roads I will use L and vary the max gear.  Things straighten out and I end up in L10.  Sometimes I leave it there for a while.  Is there any difference between L10 and D?   
    • devonthegreat
      anyone interested in a 2002 Chevy Silverado 4x4 parts truck NYC

      By devonthegreat · Posted

      **SOLD** Please end or delete post. thank you
    • PBNB
      Tire pressure for 37s

      By PBNB · Posted

      Do you think this width might affect the chalk test with a higher pressure closer to 65psi? I think lowering the pressure makes sense to get the tread to lay flatter

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...