Jump to content

Recommended Posts

Posted

Hey all, new member here. I just noticed now for the second time that my check engine light flashes only when I'm going up hill and flashes for maybe 10 times and then sure off. It has happened only twice. Does anyone know that it may indicate. Any help would be greatly appreciated

 

Thanks!!

 

Posted

Accompanied by a Stabilitrak warning too? Yeah read the codes even if it isn't active it should show up in the history as a fault. 

Posted

it will sound weird, but my 2008 did that and I topped up transmission fluid just above the line...never did it again.

Posted

Their code reader may not be good enough to get the codes. Some cheaper scanners will not do it.

 

A flashing check engine light usually means a misfire but it's plausible that it's something else. A good scan tool that can read engine and transmission data together would be wanted.

  • Like 1
Posted

Oh ok, that makes sense. Autozones odb reader looked super cheap. So I guess a garage would have that kind of tool. Im going to ask some buddies in the automotive industry, I may luck out.

 

Posted
On 1/15/2021 at 2:26 PM, rmacdona said:

it will sound weird, but my 2008 did that and I topped up transmission fluid just above the line...never did it again.

I checked the tranny fluid and it did need some fluid. Not much though

Posted
4 hours ago, Elmer-spud said:

I checked the tranny fluid and it did need some fluid. Not much though

is it still flashing?

Posted

Not so far, the odd thing is that it happened intermittently. So I'll keep an eye on it and look for someone with a professional scan tool.

Posted

Could be beginning of catalytic converters blockage— how many miles?

Posted

It has 82k. Generally what mileage would the cat start having problems? Is there a way to clean out the blockage. The last few tanks of gas I've put seafoam in, in attempts to help burn cleaner

Posted

That happened to me...cylinder five misfire. Pulled the plug, looked ok. Happened randomly when I would be driving up a hill on the highway. People around here thought perhaps injectors, maybe torque converter...ended up trading it in at 52,000 miles because I just didn't want to deal with stuff like that on a vehicle with that low of miles. But it would drive me crazy! Stuttering going up a hill, check engine light flashing, then it would just go away. And come back maybe a week or two later. 

Posted

I've experienced a similar situation...was hauling a trailer and accelerating after a roundabout.  Truck didn't down shift (good reason to always have tow/haul mode on when towing lol) and ended up lugging the engine and experienced some serious engine knock...as soon as I let off the throttle the check engine light quit flashing and went away.  Doubt you'd be getting the same issue by simply climbing a hill, but a possibility I suppose.  I've had a cylinder misfire in another vehicle in which case the computer would probably put the engine in limp mode/deactivate that cylinder, and store the check engine light code (light would stay on until the code gets erased).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,759
    Total Members
    8,960
    Most Online
    DM22
    Newest Member
    DM22
    Joined
  • Who's Online   3 Members, 0 Anonymous, 2,008 Guests (See full list)

  • Latest Articles

  • Posts

    • My 2015 1500 LTZ Silverado suddenly won't go into 4 x 4 low. It will go into 4 x 4 high.
    • Yep, just a quick reference point.    My main point being I’d do a thousand other things before I’d pay 10k for a transmission.    Speaking in ignorance cause I don’t look at these trucks, what is it worth? 20k?
    • I think users are going to want to pick their monitored parameters, which parameters they want to see first.    It should probably start with baseline at a minimum and adjust to learned, but be able to overlay baseline for comparison.   A simple severity level would be able to determine what type of alerting is appropriate or user selectable.    Why not use the OBD port though?   I think a phone connection would be a good idea, push notifications type deal.   Number 1 issue is having data is useless if you don’t know what the data should be under normal conditions. 
    • I thought I would use your thread and add to it as I just did my first longer drive with my truck in the last couple of days. I drove from the Grande Prairie area of Alberta down to Edmonton and most of where I drove in the city was the ring road so fairly free flowing but a bit of stop and go as well in the city. Stayed the night and returned home and not too many stops along the way each way but every restart and certainly every cold start sets it back for fuel mileage. Why I say that is I see some people will cherry pick a fuel mileage leg after the vehicle had been warmed up driveline wise before hand and its a forgiving ( easy rolling drive leg for example ) and call that their fuel mileage which can give a false perception of reality. I was not heavily loaded at all but never the less the flip bak cover, rubber bed mat, various tools etc and extra jerry cans of fuel all way up to a few hundred pounds of dead weight so its not an empty truck. The cold inflation tire pressures are set more near the freezing point so once they are warmed up driving I was showing 45 front and over 40 rear and realize high inflation pressures would help a little in fuel mileage but certainly not the ride on our crap sections of highway. The weather was good so was not raining as that can really drag mileage down, in fact I had a bit of a tail wind on average driving home. Most people on here would never have driven on that freeway to visualize it but its got a fair bit of rolling type of landscape with numerous river valleys. For the most part I had it on cruise set to 62 although kicking it off if I caught it in time before it started down shifting and self braking going down the grades. Most of the more substantial grades its shifting into 7th I believe as 8th just doesn't have it. Total distance round trip was 643 miles and my overall average and I did refuel three times in all, figured out to 17.65 miles per US gallon. My best fuel mileage section refuel within all of this figured out to 18.46 and these are all hand calculated figures. I find if anything that the trucks computer can be over optimistic, sometimes its pretty close but other times its stretching it. On paper persay in theory the truck would have just about made it on fumes for that whole drive without refueling once.    Which made me think of the topic thread of the wonder if these trucks could do 20 mpg and that is a good question, certainly would have to be on an easy going flat highway, no head wind, the right temperature, not packing around a bunch of dead weight and puttering along even slower than I was I would suspect and going steady and not stopping to smell the flowers or take a piss !. It probably is possible but not without effort to attain that with the wind resistance and weight of these trucks. Of course on my drive most people are passing me if they have the power as per loaded highway tractors, never mind a lot of speedy vehicles but the speed limit is 68 and most are at or well over that. 
    • Monday looks like a good day for the dealer to test an ac issue. Hopefully it all turns out good.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...