Jump to content

Recommended Posts

Posted

So I have 33k on the truck and the front rotors are warped. Pedal pulsating and vibration in wheel.  Highly doubt dealership will do anything about this.  What rotors and pads would you recommend not breaking the bank?  This damn truck keeps being a pita. Thanks

Posted (edited)

I put Powerstops rotors and pads on my previous truck (Ford F150 FX4), they were excellent! 

 

Of course you could just have the rotors turned and put OEM or similar pads on for less money!

Edited by Spyderwebb
Posted

I was looking at those but wasn’t sure if they were good or not. My brakes have had issues since the beginning. Dealer already cut them and slapped new pads on.  It’s only gotten worse. 

Posted

The aftermarket drilled or slotted power stop rotors are junk imo, i had some on my 05 and within two years the northeast climate had eating the things alive. My 2014 still has the oem rotors and pads on it, i'm thinking you might either Tow a good bit or have a heavy foot on the brake pedal or simply something is wrong with the system for them to only last that long.

  • Like 1
Posted
6 hours ago, BIGDOGx said:

The aftermarket drilled or slotted power stop rotors are junk imo, i had some on my 05 and within two years the northeast climate had eating the things alive. My 2014 still has the oem rotors and pads on it, i'm thinking you might either Tow a good bit or have a heavy foot on the brake pedal or simply something is wrong with the system for them to only last that long.

Same issue literally had them on my 05 canyon and the brakes didnt last more then 20K. put EBC red stuff on the from (changed the front brakes to a 09) and ultra rotors, they were great, once my brakes are gone on mine i will put EBC on it. 

 

OP: 

do you tow alot? are you a two foot driver? 

Posted

I don’t tow at all and mostly drive highway. Have I been heavy on the breaks, yes. However, majority of the time I put cruise control on and drive with the flow of traffic. Like I mentioned before, I’ve had issues with the brakes for quite sometime. I took a look at my rotors today when I got home from work and it appears my fronts are warped. I’m also getting the symptoms of wheel shake with the pulsating braking.  So no to power stop and yes to ebc and ultra rotors?

Posted
On 5/14/2021 at 6:02 PM, BlancoSilverado said:

Same issue literally had them on my 05 canyon and the brakes didnt last more then 20K. put EBC red stuff on the from (changed the front brakes to a 09) and ultra rotors, they were great, once my brakes are gone on mine i will put EBC on it. 

 

OP: 

do you tow alot? are you a two foot driver? 

Ran them on my 12 FX4 for over 100k miles, no problems?

Posted

Is there any difference in changing these as in the previous model?  I’ve changed a few sets of brakes and rotors before and was wondering if there’s anything different I need to know with the t1’s. Thanks

  • 1 month later...
Posted

I always got good service life from Duralast Gold rotors from Autozone, my local store stocks them for the new silverado.

Posted
3 hours ago, BowtieSquatch said:

Your warranty is for 36,000 miles.  The dealership has to honor it.   Take it to them with the complaint. 

Not use about US, but Canadian GM warranty will do one turning of the rotors within first 20,000 kms (12,000 miles) if they warp. But after that, it is a serviceable item, mainly because there are so many factors than can cause warping (heavy trailer towing through mountains with improper trailer brake settings, hard emergency braking, people rest their left foot on the brake pedal as they drive, etc).

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.6k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,993
    Total Members
    8,960
    Most Online
    President Roberto
    Newest Member
    President Roberto
    Joined
  • Who's Online   1 Member, 0 Anonymous, 270 Guests (See full list)

  • Latest Articles

  • Posts

    • I don't wanna do major surgery/upgrades, behind-the-dash work, add amps, change radio etc. on my '26 std cab WT. On the WT, it has the base 7" IOR infotainment setup, and only two speakers (doors). Since I listen to classical, looked around for speakers that do well and dug thru reviews. Two-way speakers were found to be better than 3-way. So I've ordered a pair of  Infinity Reference REF-9632IX 2 way speakers.  [These may  or may not have been discontinued / succeeded by the 3-way ...9633 ones.]    These speakers are lauded for 3 ohm and 94db sensitivity spec so they'll work well for ordinary base car radios without amps and offer better performance (quality,  strength) than  default base paper-cone speakers. They'll be installed in a few days and I'll let y'all know what I think. Bill W San Jose      
    • Thanks!   Changed out the rear shocks today to Bilstein 5100s.  So far feel much better. The stock Rancho were wore out.  Lots of heavy hauling (2 moves, home renovations, etc).  Next up is new BFG tires Monday.  Cant wait the current tires have little to no wet traction and are super loud (hum)    
    • Ok, I got the all the codes. What do you all think would be a place to start?
    • How about I just point to the factory pans stand pipe little drain plug and claim its a pan with a real drain plug !. I just couldn't swallow the fact that a Dorman pan which at this point is probably the only pan out there that fits the gas version truck cost that much up here in Canada so I decided initially anyway to skip it and see what I thought of pulling the pan method and down the road if I felt inclined enough then I would either install a drain plug kit in the factory pan if there is enough room for it, or have a bung welded onto it, or put an aftermarket pan on. The thing is if the pan is not pulled then the magnets in the pan can't be inspected and cleaned or if wanting to change out the filter. However of course it certainly would make the job easier to be able to drop the oil first before having to handle the pan if dropping the pan that go around was the goal.    I knew a guy locally that was doing custom field spraying years ago with a pickup pulling a ground driven sprayer, I believe it was a GM pickup with an automatic trans. He had a drain plug in his pan and would drop the oil out of it once a week and top it back up through the dipstick tube to keep refreshing a portion of the oil often and that made the transmission last far longer than had he done nothing. Soft fields pulling 500 gallons of water at the start of each mixed up sprayer tank batch and in low range sucking along. I imagine he got some tips from other custom sprayer outfits doing the same thing at the time and learning from their blown up tranny mistakes. Transmissions then had no lock up converter so would cook the crap out of the fluid slipping that much and it would not have been synthetic fluid either. 
    • 3.39 Kroger’s in Montgomery Texas. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...