Jump to content

Towing question

SuperDuper
 Share

Recommended Posts

SuperDuper Enthusiast

SuperDuper

Posted
Posted

I just picked up a new 2021 gas 2500 Sierra from Laura Buick gmc. I already screwed the pooch with the recommended break in on my drive home as I live about 400 miles away. Did a lot of 70mph driving. Did have some slower speeds mixed in, but 70 was the majority of it.
 

Anyways, reading the manual now I see it mentions not exceeding 50mph for the first 500 miles of towing. What’s the reasoning for this?  I’m asking as I have trip coming up where I plan to tow a pontoon for about 375 miles one way. Normal driving it would take around 6 hours, so at 50 mph it will take most of a day to get there. I know break in is a hot topic with a variety of advice, so would just like to hear everyone’s thoughts. Thanks!

nards444 Senior Enthusiast

nards444

Posted
Posted
7 hours ago, SuperDuper said:

I just picked up a new 2021 gas 2500 Sierra from Laura Buick gmc. I already screwed the pooch with the recommended break in on my drive home as I live about 400 miles away. Did a lot of 70mph driving. Did have some slower speeds mixed in, but 70 was the majority of it.
 

Anyways, reading the manual now I see it mentions not exceeding 50mph for the first 500 miles of towing. What’s the reasoning for this?  I’m asking as I have trip coming up where I plan to tow a pontoon for about 375 miles one way. Normal driving it would take around 6 hours, so at 50 mph it will take most of a day to get there. I know break in is a hot topic with a variety of advice, so would just like to hear everyone’s thoughts. Thanks!

 

I dont know how much I believe in this break in stuff.  I mean I understand giving it a few miles after purchase,  double check fluids etc.  Either way drive about an hour or so a night after a few nights youll be at 500 miles.

03 Cobra Enthusiast

03 Cobra

Posted
Posted
8 hours ago, SuperDuper said:

I just picked up a new 2021 gas 2500 Sierra from Laura Buick gmc. I already screwed the pooch with the recommended break in on my drive home as I live about 400 miles away. Did a lot of 70mph driving. Did have some slower speeds mixed in, but 70 was the majority of it.
 

Anyways, reading the manual now I see it mentions not exceeding 50mph for the first 500 miles of towing. What’s the reasoning for this?  I’m asking as I have trip coming up where I plan to tow a pontoon for about 375 miles one way. Normal driving it would take around 6 hours, so at 50 mph it will take most of a day to get there. I know break in is a hot topic with a variety of advice, so would just like to hear everyone’s thoughts. Thanks!

 

When they write the requirements for towing break in they have to consider someone towing at max capacity of the truck.  Your pontoon is a few thousand pounds at most I would guess and from the truck's perspective it won't even know it's towing anything.  If it was a 16k pound fifth wheel it might be different.  I'd drive it and be proud!

garagerog Enthusiast

garagerog

Posted
Posted (edited)

SuperDuper, you're fine, after all it's not like you're breaking in a new motor like Finnegan and Freiburger would. The towing restrictions probably have as much to do with bedding the brakes and breaking in the differential gears as much as the motor.

Edited by garagerog
Heavyduty SEO New Member

Heavyduty SEO

Posted
Posted
On 7/27/2021 at 8:53 AM, SuperDuper said:

I just picked up a new 2021 gas 2500 Sierra from Laura Buick gmc. I already screwed the pooch with the recommended break in on my drive home as I live about 400 miles away. Did a lot of 70mph driving. Did have some slower speeds mixed in, but 70 was the majority of it.
 

Anyways, reading the manual now I see it mentions not exceeding 50mph for the first 500 miles of towing. What’s the reasoning for this?  I’m asking as I have trip coming up where I plan to tow a pontoon for about 375 miles one way. Normal driving it would take around 6 hours, so at 50 mph it will take most of a day to get there. I know break in is a hot topic with a variety of advice, so would just like to hear everyone’s thoughts. Thanks!

first you need to read the manual you know when buy a new vehicle there are some restrictions for using it like not to over speed the vehicle and not top tow to much weight for at least first 500 to 1000 mph but nothing to worry about it just maintain it and do service on time

newdude Senior Enthusiast

newdude

Posted
Posted (edited)
On 7/26/2021 at 11:53 PM, SuperDuper said:

I just picked up a new 2021 gas 2500 Sierra from Laura Buick gmc. I already screwed the pooch with the recommended break in on my drive home as I live about 400 miles away. Did a lot of 70mph driving. Did have some slower speeds mixed in, but 70 was the majority of it.
 

Anyways, reading the manual now I see it mentions not exceeding 50mph for the first 500 miles of towing. What’s the reasoning for this?  I’m asking as I have trip coming up where I plan to tow a pontoon for about 375 miles one way. Normal driving it would take around 6 hours, so at 50 mph it will take most of a day to get there. I know break in is a hot topic with a variety of advice, so would just like to hear everyone’s thoughts. Thanks!

 

 

Real simple.  The 500mi deal comes from the axle supplier AAM.  AAM calls for a 500mi break in of the ring and pinions.  When new, they produce a LOT of heat.  Towing would compound that break in heat quite a bit hence no towing and their recommended speed no to exceed.  GM applies this procedure to the break in of the truck in the manual.

 

AAM also calls for a fluid change at the 500mi mark to remove the stressed fluid from the break in.  But of course, GM doesn't make any mention of that.    

Edited by newdude
KARNUT Senior Enthusiast

KARNUT

Posted
Posted

I guess vehicles like people are more sensitive theses days. Since the seventies I average a new truck every 2-3 years. Usually I buy one just before a long trip. Averaging 50-60K miles a year, trips come often. Half to one tons gas or diesel, stock or modified. They all had weight in them or pulled loads. In other words they worked for a living. I had one failure, a manufacturer defect. I live 20 minutes from a major highway so I guess that was the break in. Being in business and dealing with 100s of customers this was the rule not the exception. Of course they mostly drove Fords some Rams. I was the outlier driving GMs. My personal vehicle got the same treatment. Bought usually before vacation. If you have the time for the so called break in period, it can’t hurt. I don’t many who do. Never heard it making a difference. 

SuperDuper Enthusiast

SuperDuper

Posted
  • Author
Posted

Thanks everyone for the replies so far.  I'm feeling a little better about not having a bunch of towing miles on my truck before my trip.  I plan to put it on my lift prior to leaving and checking the rear diff fluid and throwing some lucas gear oil in there if it has the room for it.  On a side note, out of curiosity how many members on here actually adhered to the recommendations in the manual for standard truck break in and towing break in?

Random Enthusiast

Random

Posted
Posted

My manual did not have anything in regards to a towing break-in period. It just states "Do not tow trailer during break-in". So for the first 500 miles no towing.

 

Purchased my truck before camping season started, so didn't really run into needing to worry about not towing during break-in. I tried to take back roads when I could to keep my speed below the 55 mph recommendation, but that rarely worked out the way I planned. Did "okay" at keeping it within the limits, but I didn't bend over backwards trying to meet the recommendations.

Njmurvin Enthusiast

Njmurvin

Posted
Posted

My truck had 150 miles on it when I took delivery (was moved from another dealership). I had to drive about 300 miles r/t to a Camping World to get my Andersen hitch. Trying to keep the truck under 60mph on I5 was a real challenge. Another 50 miles or so driving around town before my first tow to Big Bear, CA. No problems at all pulling my 12K 5th wheel up the mountain. More importantly, the EB worked beautifully on the way down once I got the hang of using the brake to engage it.

Grjfer Enthusiast

Grjfer

Posted
Posted
14 hours ago, Heavyduty SEO said:

first you need to read the manual you know when buy a new vehicle there are some restrictions for using it like not to over speed the vehicle and not top tow to much weight for at least first 500 to 1000 mph but nothing to worry about it just maintain it and do service on time

How many Fleet buyers do you think adhere to the break-in? Contractors and repair businesses buy these new and turn them over to their Crews and off they go. Some with utility boxes loaded with tools and supplies, others towing land scape trailers or trailers loaded with building supplies. Pretty sure they are stressing the 500 mile "break in". 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Another JR
      Parking Brake - Automatic Engagement Questions

      By Another JR · Posted

      On 2021 3500hd it consistently sets automatically when selecting park if the incline/decline is above a certain angle. 
    • Policeoff01
      Feeling Vibration and Jiggles in 2024 HD Gasser Steering Wheel

      By Policeoff01 · Posted

      Curious, did anyone ever get a fix for the vibration reported here.   I have a 2024 Silverado with 6.6 duramax.   I’m noting the same vibration resonating up through the steering shaft into the steering wheel.    Best way to describe- like someone is tapping on the steering shaft/components and it’s resonating into the steering wheel.    thanks. 
    • Gkistler
      2015 Sierra Denali L86 cyl 5 misfire at idle

      By Gkistler · Posted

      Hi friends - first time poster. I have a 2015 sierra Denali with 150k miles, I’m the second owner and she’s given me 75k of great service. I run a pulse AFM disable device. Starting Thursday when I exited the freeway after a short local ride it started idling rough, with an obvious misfire shake and was down on low end power.  I got it home and hooked it up to my scannner and found no codes but in live data a pretty bad misfire on cylinder 5. I replaced the coil, plug and wire with all new OE replacements (Delphi gn10165 coil, acdelco wire and 41-168 plug). It’s still behaving the same way after firing the parts cannon at it.   I know cyl 5 is a non AFM cylinder so I am not thinking this is AFM related but I’m kinda at a loss. injector? Bent pushrod? It’s running too well over 1k rpm to suggest those IMO. Has anyone chase this issue before and what was it? Any suggestions? 
    • zibzer2
      Pulsating Noise 4Cyl Mode

      By zibzer2 · Posted

      2017 Silverado L83 5.3l 6speed transmission Hello, not a new member but havent posted in a while and my old signup info isnt working so had to create a new account. anyways, I have an issue with my truck and hope someone can spread some light on whats happening: -when it goes to 4cyl mode it makes a clunk sound (but not when coasting or going downhill) -when in 4 cyl mode and under load it makes a load pulsating sound (not a tick). -goes away completely when in M5 gear or when plugging in an AFM delete. Im guessing it is one of 2 things but im not convinced of either to be honest. 1. lifter stuck in v8 mode 2. torque converter shudder realistically it doesn't seem like the TC as there is no physical vibration , and it never happens in v8 mode. but maybe? and wouldnt a lifter make a sound whether with load or not? any ideas let me know please. thank you!  
    • Chuck FB
      Some Assembly is Required

      By Chuck FB · Posted

      Which has made me wonder with the various engine failures of a few brands in the last few years, is it sub par materials such as lifters etc causing failures, or bearing clearances on the crank etc or perhaps bad designing of an engine physically or causing too much load on the components due to the hp/torque they can push out of them. Or is the oil viscosity and additive package of current oils or a lack of oil flow by an oil pump not able to supply sufficient oil at idle or under high load at low rpm. Or is it every item I listed that combined together has pushed the limits so far to the left that there is hardly a margin of safety left and add in some fuel dilution and too long of an OCI and premature engine failure is the result ?. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...