Jump to content

Recommended Posts

Posted

A few years back I changed the radio in my GMC Sierra 2004 to JVC (from factory).  Recently disconnected battery ....now the steering wheel controls don't work for the radio nor does the radio turn off when the door is opened.  No other changes were done that could have impacted the radio, rechecked all the connections on back of radio, nothing seems wrong yet this stuff still isn't working correctly - any ideas?

Posted

I understand that you checked wires/wiring and you are probably spot on that they are connected properly.  The problem is sometimes things internally in your radio start acting up, especially aftermarket ones.  I had a blaupunkt (sp) radio I installed that started doing this, I replaced the radio and all was well.  I know it was the radio because I bought the same radio and used the already wired harness and it worked flawlessly.  Plugged the old one back in just to see and it wouldnt do what it needed to.

Posted
1 hour ago, Linda1 said:

A few years back I changed the radio in my GMC Sierra 2004 to JVC (from factory).  Recently disconnected battery ....now the steering wheel controls don't work for the radio nor does the radio turn off when the door is opened.  No other changes were done that could have impacted the radio, rechecked all the connections on back of radio, nothing seems wrong yet this stuff still isn't working correctly - any ideas?

Welcome to the site.

 

How old is your battery?

Posted

First, I am suspecting that maybe something went wrong in the radio....and that is the most obvious thing even though it's not but a few years old....

 

As for how old the battery in my truck is, not sure - although, all the dash and interior lights go out fine - just stuff related to the radio that has become a problem.  The battery was disconnected because other work was being done and that was part of the process of fixing the other truck issues.

 

Posted

Probably some internal circuit board battery in the radio that is bad and once the power was lost to the radio, it lost its settings and can't recover.   

Posted

Elcamino (Mike),  Yeah, I am thinking that you might be right because nothing else is having issues.  The part that kinda sucks is this radio didn't make 2 years in my  Sierra....installed 11/2019 and already bad....I guess I will order another one and see if that fixes the issue.

 

Posted

This is why its bad to disconnect the battery in modern vehicles without a memory power supply, some vehicles will not even start or other equipment such as the radio no operate correctly. 

Always use a memory power supply, they are available on Amazon for around $18 and plug into the ALDL port and have several connectors to #1 clamp onto a car battery #2 plug into the lighter outlet of another vehicle. 

Posted (edited)

I have a thing that plugs into what used to be called the cigarette lighter with a 9 volt battery connected to it. I've never used it, it's been in my (what has become my rather LARGE tool collection) tool box for gosh; what, the early '80s. I had a new S-15 and a new Celebrity back then. They might have been OBD1.

My issue on thissubject is on my '06 Avi. The radio used to go off when opening the drivers door, now i have to use another door. I replaced the catch/door lock, door lock actuator and got the same issue, I have an after market radio but i bought the interconnect adapters (boxes) that's supposed to make most stuff work. I wonder if there isn't a relay that's fubar?

Edited by dna9656
more info

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • Are you playing Slide Down endlessly but your score is still low? Are you constantly crashing into obstacles as the game speed increases? Don't worry, this article will share 5 invaluable tips to help you master the race and impress your friends. Golden Rules 1. Look one step further. The mistake of 90% of new players is only staring at their character. The secret of experts is to look towards the top of the screen (where the slide is about to appear). This gives your brain an extra 0.5 - 1 second to process the situation and determine the direction of movement before the obstacle approaches. 2. Use gentle movements; don't swipe too hard. Slide Down is very sensitive. Moving your finger too forcefully or with excessive amplitude will cause your character to be thrown off course or crash into a wall. Practise moving your finger with small, decisive, and precise movements. 3. Don't be greedy for gold in dangerous locations. Gold coins are tempting for buying skins, but life is more important. If you see a gold coin right on the edge of a cliff or next to a spike trap, ignore it. Our goal is a High Score, and your score only increases if you survive. 4. Make the most of Power-ups. During the slide, you'll encounter items like Magnets (attract gold) or Shields (temporary invincibility). Never miss them! Especially the Shield, it's your "get out of jail free card" to help you get through those deadly fast sections. 5. Stay calm when speed peaks. When your score exceeds 500 or 1000, the game speed will be very fast. At this point, don't try to think logically; let your natural reflexes work. Take deep breaths and don't panic. Apply these 5 tips to your next game, and your leaderboard will surely improve dramatically. Good luck climbing the Slide Down leaderboard!
    • If you use compressed air regularly, one problem you cannot ignore is moisture. Water in the air line can cause rust, unstable air pressure, poor tool performance, and even damage to sensitive equipment. That is why I highly recommend using a desiccant air dryer. A desiccant air dryer is designed to remove moisture from compressed air by using drying materials such as activated alumina or molecular sieve. Compared with basic water separators, it can achieve much lower dew points, making it especially useful for applications that require dry and stable air. For workshops, painting systems, pneumatic tools, CNC machines, laser cutting equipment, and industrial production lines, a desiccant air dryer can make a big difference. It helps protect equipment, improve air quality, reduce maintenance costs, and extend the service life of the whole compressed air system. Another advantage is reliability. Many desiccant air dryers are built for continuous operation and can maintain stable drying performance even in demanding environments. For users who care about long-term efficiency and equipment protection, this is a smart investment. When choosing a desiccant air dryer, I suggest paying attention to air flow capacity, working pressure, dew point performance, regeneration method, and maintenance requirements. A good model should match your compressor system and actual air consumption. Overall, if moisture is causing problems in your compressed air system, a desiccant air dryer is definitely worth considering. It is practical, efficient, and highly useful for anyone who needs clean, dry, and reliable compressed air.
    • My brand new 2007 Silverado's wax frame was rust from end to end partway through it's SECOND winter here in MA. That stuff is completely useless.    
    • I went another direction after losing a trailer tire, thanks to not being able to access air at ANY of the 5 gas stations and garages I stopped at prior, with a Toyota Tacoma onboard, 50 miles from the Canadian border. They were either out of order, access was blocked, or the hose a few feet too short and I couldn't get any closer without risking damage to someone's property.   https://postimg.cc/gallery/X5QJ55w
    • I took a 12 second video on my iphone but the file is too big to upload. I will have to figure out how to extract the audio or just do another start with an audio recording. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...