Jump to content

Recommended Posts

Posted

Good morning. We’ve almost finished purchasing a 2022 2500hd WT CCSB as my wife’s new work truck. Currently just waiting for the paperwork to be overnighted from Michigan to Kentucky and going to get it next week. 
 

Anyway, due to truck prices and the current inventory shortage we opted for the WT which doesn’t have a power seat. This was also the only truck I could find within 200 miles and that they were selling at MSRP. My wife being 5’2” and had trouble seeing the front of the hood on the test drive but is going to make due. I would like to in the future look at swapping in a power seat. Anybody done this yet?

 

I imagine it shouldn’t be that hard but with everything being ran through the BCM these days I wasn’t sure. 
 

In the mean time I have seen the seat risers from Ohio diesel that we will probably employ to get her by, especially when she starts towing. 

Posted
17 minutes ago, GtEcH25 said:

Good morning. We’ve almost finished purchasing a 2022 2500hd WT CCSB as my wife’s new work truck. Currently just waiting for the paperwork to be overnighted from Michigan to Kentucky and going to get it next week. 
 

Anyway, due to truck prices and the current inventory shortage we opted for the WT which doesn’t have a power seat. This was also the only truck I could find within 200 miles and that they were selling at MSRP. My wife being 5’2” and had trouble seeing the front of the hood on the test drive but is going to make due. I would like to in the future look at swapping in a power seat. Anybody done this yet?

 

I imagine it shouldn’t be that hard but with everything being ran through the BCM these days I wasn’t sure. 
 

In the mean time I have seen the seat risers from Ohio diesel that we will probably employ to get her by, especially when she starts towing. 

Don’t you get the same adjustments power or not? I admit it’s been awhile since I’ve had manual seats they seemed fine for adjusting. Especially since it’s one and done. Not bashing just curious. 

Posted

No there’s no seat up and down, at least that I could find. It was only 4 way, slide forward and back and tilt seat forward and back. 

Posted
31 minutes ago, GtEcH25 said:

No there’s no seat up and down, at least that I could find. It was only 4 way, slide forward and back and tilt seat forward and back. 

Ok, the last manual seat I had came with a crank to raise the seat. Mazda 3 I believe. My wife sits on a cushion that’s about 3 inches thick. The unexpected plus her leather seat still looks new after 11 years. Cushions could be the answer.

  • 2 months later...
Posted
On 8/14/2022 at 10:28 AM, Abody711 said:

I am d=facing the same issue. Has anyone done the power seat swap or looked into it?

My understanding is there "may/can be" a bunch of wiring to be added if the truck was not ordered with the power options (This is what I've picked upon in other forums and discussions in swapping '22 GM Tahoe powered seats into my OBS '97 Tahoe).   My suggestion is to chat w/both OEM Seats (OEM Auto & Truck Seats)/Keith at (321) 324-4450 (located (321) 324-4450) www.oemcarandtruckseats.com and Dan at OBS Outpost (407) 284-7466 (also in Fl)   www.OBSOutpost.com.

Both are great guys and have deep knowledge with seat swaps/upgrade/etc.   Good Luck!

 

  • 3 weeks later...
Posted

I can confirm WT has no height increase via pump or any other ratchet system. My wife is also short and has a 4.7” cushion we found on Amazon. She rarely drives the truck anyway. 

  • 2 weeks later...
Posted

I believe there is a thread in the 1500 forum on safely adding spacers to raise the average height of the from seats. If anybody is interested. I was referring to it because I plan to make some steel brackets for underseat storage. Not to lift the seat per SE, but just to use the seat mounts for anchor points for a secure storage box.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • Sounds like converting will be a bigger endeavor than I was thinking. This truck doesn't have 2Hi like the Suburban did. The Tahoe has 4Hi and 4Lo and a button to turn of traction control.   From what I understand the Stabilitrak uses open diff in the front and rear. When wheel speed is not the same the stabilitrak uses the ABS system to slowdown the spinning wheel(s) to transfer power to the slower non-spinning wheel(s). I thought the transfer case was open too. Being able to transfer power either more to front or rear depending on wheel spin. Maybe I miss understood some information with you saying and power transfer is 50-50. Thanks
    • My brother has a 2007 Avalanche with afm 5.3. It`s got 176,000 miles. Runs like a clock. Never been apart. Co worker has a 2010 Tahoe with afm 5.3. 230,000 miles. Never been apart. Runs like a clock. So, even though cyl deac is a weak spot, they can go the distance.   BUT, these engines had the oil changed regularly, AND had 5w30 as spec. I wonder if they would have lasted this far on 0w20? I`ll bet not.
    • I certainly could be wrong but I hear of pickups far newer than that 2007 cutoff which may not be going to the wrecker but are having engine work done and be that a reman engine or new engine or trying to repair the existing engine. Some of it would be design issues as per the cylinder deactivation system that GM has and one of those lifters wiping out the cam and the question of oil changes moving the needle or not on that whole mess, or in the case of Ford pickup engines that have the long timing chains and wearing them out and the roller followers and phasers and some of that certainly goes back to oil change intervals. But in those various cases the truck has all sorts of life left in it and so the unfortunate owner and may be original owner or used market owner that is pouring money into repairs so the truck is not seeing the salvage yard yet but damage is happening by infrequent oil changes. A friends son had bought a 2018 I think it is half ton GM and it had some sort of extended or used dealer warranty on it and of course the lifter issue bites and its rattling and so the dealer had to swallow the bill and was at least 7000.00 and I think they only replaced what they felt they had to replace so yeah, I can see that being a ticking time bomb in the not too distant future. Would frequent oil changes cure all these engineering "marvels", probably not but some engine designs have shown that they do much better if the oil is changed a lot more often then if the manufacturer service claims are followed. New trucks cost so much that there is an incentive to keep the existing truck on the road by repairing. 
    • get a good code reader, and find out what problems the truck has noticed by reading codes. cheap ones can only get basic engine codes, you may want to get one that can get codes from all the computers in your truck.
    • This is sort of my point, salvage yards aren't overflowing with all these 'poorly' maintained trucks - excellent/good/servicable condition otherwise, salvaged only as a result of a bad engine from poor oil change regiment.    In my area, there are no 2007 to newer gm trucks/suvs in any salvage yards. A few are in the 'recyclers' with very obvious reasons for being there - wrecked.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...