Jump to content

Recommended Posts

Posted

Does it matter that my outside temperature reading is off?  It’s generally ready about 5 to 7 degrees higher than the outside temp.  Of course, having OCD, this drives me crazy, but does it effect anything?  I’m wondering if maybe the air conditioning/heater is impacted by the outside temp when in auto mode, or if anything else is.  Not really worth taking to the dealer, but a bit irritating nonetheless.  Is this common?

Posted

My Chevy never reads the same as WeatherBug. Especially when I first start it. It's off several degrees. Usually reading cooler than what the outside temperature actually is. 

Posted

I have been waiting for a post like this.  It was the first thing i noticed in my 2022 refresh.  it is off consistently 8-30*.  Twice after I got it within a week, i mentioned it to the dealer when i took it back for the stereo issue and they completely ignored me.   Ambiet was mid to high 90s and the truck read 115 one day and 127 the next, both on my 45 minute commute home.    GM has really sh1t the bed with these trucks.  

Posted

The temperature sensor is in the bottom of the passenger side mirror. If you're parking in the sun it's going to read higher or if it's in the shade it might be closer to actual. Once you start moving then air moves over it and adjust accordingly. All past temperature sensors I've ever seen in factory installed vehicles are in the grill area in front of the radiator. I'm not sure why they moved it to the outside mirror on these trucks.

  • Like 1
Posted
7 hours ago, GETGONE said:

The temperature sensor is in the bottom of the passenger side mirror. If you're parking in the sun it's going to read higher or if it's in the shade it might be closer to actual. Once you start moving then air moves over it and adjust accordingly. All past temperature sensors I've ever seen in factory installed vehicles are in the grill area in front of the radiator. I'm not sure why they moved it to the outside mirror on these trucks.

You would think so, that’s how past cars I’ve owned have worked. My truck though is still off 5-10 degrees after driving for 2 hours over a mountain pass in overcast conditions.

 

It doesn’t matter if it’s 50 outside or 110, it still reads high no matter how far it’s driven or where it’s parked. Obviously it reads really high if parked in the sun all day, but it cools down to normal 5-10 high after driving it.

 

I haven’t really noticed it hurting anything besides being really annoying, but I never remote start either.

Posted
8 hours ago, Zedicus16 said:

You would think so, that’s how past cars I’ve owned have worked. My truck though is still off 5-10 degrees after driving for 2 hours over a mountain pass in overcast conditions.

 

It doesn’t matter if it’s 50 outside or 110, it still reads high no matter how far it’s driven or where it’s parked. Obviously it reads really high if parked in the sun all day, but it cools down to normal 5-10 high after driving it.

 

I haven’t really noticed it hurting anything besides being really annoying, but I never remote start either.

Same here.  Doesn’t matter how long I’m driving, it never settles in at the actual temp like I’ve had with other vehicles.

Posted

This is all going to depend on where you are getting your weather data from.  The truck is probably more accurate than you think unless you've got a weather station at your house or are pulling local weather data from someone who has one running on weatherbug or weatherunderground, etc.  

 

If I look at weather.gov for example, they pull their temperature data from our local airport even if I search for my zipcode.  There is a temperature discrepancy right there from the airport to where I live.  

Posted
On 9/14/2022 at 5:12 PM, GN2018 said:

Does it matter that my outside temperature reading is off?  It’s generally ready about 5 to 7 degrees higher than the outside temp.  Of course, having OCD, this drives me crazy, but does it effect anything?  I’m wondering if maybe the air conditioning/heater is impacted by the outside temp when in auto mode, or if anything else is.  Not really worth taking to the dealer, but a bit irritating nonetheless.  Is this common?

 

Are you determining the outside temp using a thermometer beside the truck? 

Official temperature quoted by local weather station or airport is not likely gonna be the same as the truck's locaiton

 

Posted

I live in S.E. Michigan 13 miles away from the airport. I think it unlikely that there would be a significant difference between the airport reading and my actual reading. However, I happen to have a couple very accurate thermometers and for the sake of discovery, I’ll hook one to my mirror and get a reading.  Can I get a confirmation that the truck’s temperature gauge is in the driver side mirror?  If not, where is it?  I would want to mount my thermometer near the truck’s. Thanks. 

Posted

The issue I have with this truck is that it bases the HVAC temperature on the outside temperature instead of using a sensor inside the cabin.

Posted
21 hours ago, GN2018 said:

Can I get a confirmation that the truck’s temperature gauge is in the driver side mirror?  If not, where is it?

It's on the bottom of the PASSENGER side mirror.

  • Thanks 1
Posted

Mine 2019 does the same thing.  Never accurate during the daytime with sun.  Poor design, that in testing, I'm surprised this wasn't addressed.  

Posted

Place a thermometer next to the passenger mirror and compare the readings after a set amount of time. This will give a reading at it's current place regardless what news or weather app says. The truck temp and the thermometer should relatively be the same/close.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,888
    Total Members
    8,960
    Most Online
    xdieselmechanic
    Newest Member
    xdieselmechanic
    Joined
  • Who's Online   1 Member, 0 Anonymous, 544 Guests (See full list)


  • Latest Articles

  • Posts

    • Holy s**t - not much of a parts thrower you say? You BLASTED that thing with the parts cannon!  You'd have been probably $1,000 ahead if you had just brought it to a competent shop rather than shotgunning a bunch of parts it clearly didn't need.   Just FYI - oil additives are really, REALLY good at ONE thing ... and that's emptying your wallet. They're ALL useless gimmicks.   If that has the L94 or L99, then #7 is an AFM cylinder. I'd suspect a failed lifter in that case.   If you leaned on wiring, sensors, and/or connectors while changing the oil, you'll have to check all that to be sure pins didn't get pulled out, connectors broken, etc.. Old wire loom that was barely adequate when new is certainly brittle by year 19 - make sure wires aren't chaffed and shorting out somewhere where you might have leaned. or supported yourself on it.   If your a mechanic, why didn't you just find out what you were missing and troubleshoot from there??  TIMED spark, fuel PSI / injector pulse, air, compression.  Can't make ANY money going the parts cannon route.
    • LOL! Are you joking?? That wax SUCKS! 100% gimmick made to "look" good.    After just TWO winters I had severe surface rusting in patches over 90% of the frame. Only reason it looks great in the pics is because I SATURATED the frame every single fall with used motor oil for 14 of the 16 years I owned it. Otherwise it would've been sent to the crusher 8 years earlier with the speed it was rusting prior!    I sold that POS 3 years ago. Was a gigantic headache the second it rolled off the showroom floor. Brakes pulsated on the TEST DRIVE. Door trim fell off the 1st week! Interior squeaked and rattled, and the drivetrain clunked after 2k miles. 4x4 switch failed shortly after. Front end - ball joints, struts, hub bearings - all failed between 38k-50k. Engine started burning oil at 50k. Rear and and transmission failed before 100k. Nothing but problems, and frustration with the piss-poor engineering designed to make you give up. Well, it worked! Nothing on that truck was easy to remove ... except the wheels. They haven't figured out how to screw that up yet. Give 'em time ...   I won't make that mistake again. EVER.   Such fond memories ... https://postimg.cc/K1qf23tS  https://postimg.cc/gallery/X02z64J  https://postimg.cc/gallery/mHSRXZv  https://postimg.cc/gallery/D4mMRfL
    • Different monitors do their test only under conditions specific to that monitor.  you MIGHT find the drive cycle conditions for the monitor that isn't ready on this site: https://lemon-manuals.la/   If it's not there, then it should be on alldata.com for your truck, but it requires a paid subscription.   And you need to know which specific monitor isn't ready.
    • from another thread   Update...although the truck sometimes seems to idle weird and the transmission shift a little weird, I've driven about 7,000  miles and no issues.   However, the way GM has handled my rental reimbursement, the situation when my truck quit, and the recall in general has led me to this point...I have driven a GM vehicle for the past 46 years and unless I buy a C3 Corvette, this is the last GM vehicle I will ever own. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...