2015 Sierra W/T to no so W/T

TNTSierra · June 26, 2023

I'm really leaning toward this unit. Looks nice, big, and clean

04palass · June 27, 2023

21 hours ago, TNTSilverado said:

I'm really leaning toward this unit. Looks nice, big, and clean

I was actually just researching that one yesterday! This one too

https://www.ebay.com/itm/234939100106

TNTSierra · June 28, 2023

9 hours ago, 04palass said:

I was actually just researching that one yesterday! This one too

https://www.ebay.com/itm/234939100106

That's a d@mn big screen! I'll be looking into this one as well. I was also thinking about just keeping my stock 8 inch and adding the bypass adapter to watch DVD's on that screen.

04palass · June 30, 2023

My goal is to finally get this rear sliding window wired up next week. I am no expert but there is not a ton of info online about this retro-fit. I have come up with this diagram. I also ordered a universal power window harness to start from. If all goes well I will go in depth so if anyone wants to do this in the future there will be a guide.

Switch diagram that was provided (after I did some digging, the kit didn't come with printed instructions)

https://www.amazon.com/gp/product/B07L162PC5/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1

Annd some pics I took last night for good measure lol

DCazares · June 30, 2023

On 6/27/2023 at 9:28 AM, 04palass said:

I was actually just researching that one yesterday! This one too

https://www.ebay.com/itm/234939100106

I've had this installed for about a month now and it's great. No complaints.

tuckin22 · July 8, 2023

On 6/30/2023 at 11:15 AM, 04palass said:

My goal is to finally get this rear sliding window wired up next week. I am no expert but there is not a ton of info online about this retro-fit. I have come up with this diagram. I also ordered a universal power window harness to start from. If all goes well I will go in depth so if anyone wants to do this in the future there will be a guide.

Switch diagram that was provided (after I did some digging, the kit didn't come with printed instructions)

https://www.amazon.com/gp/product/B07L162PC5/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1

Annd some pics I took last night for good measure lol

So, I know a while back you had a quick markup attached. I found someone had marked something up on here (couldn’t find the thread I came from so apologies if it is biting off whoever did it) that was basically explaining from point a to b, I was searching for something else and thought of this thread here. I haven’t verified it completely as I am not there yet. But thought it might help.

POWER SLIDING REAR WINDOW INFO.pdf

04palass · July 8, 2023

5 hours ago, tuckin22 said:

So, I know a while back you had a quick markup attached. I found someone had marked something up on here (couldn’t find the thread I came from so apologies if it is biting off whoever did it) that was basically explaining from point a to b, I was searching for something else and thought of this thread here. I haven’t verified it completely as I am not there yet. But thought it might help.

POWER SLIDING REAR WINDOW INFO.pdf 2.72 MB · 1 download

That is extremely helpful thank you so much!!!!

Had a great road trip, 790 miles got plenty dirty but hey that's what its for

I did give it a quick coin wash after the trip there to get most of the bugs off

04palass · August 7, 2023

Success!

Alot of work but I now have a fully functioning sliding rear window! I will do a write up shortly but I used a universal power window harness, spliced it all together and boom she works!

I had trim my rear window molding to fit with the sliding rear window.

I also did some other interior touch ups. When I got the truck it had the plane work truck interior with the matte black dash trim. I added trim from a LT Silverado but I did not know at the time that the Sierra and Silverado LT trim were different until I added the steering wheel. So I got some OEM Sierra SLT dash trim, but that came with an issue. It had the holes for the factory heated/cooled seats which my truck does not. So after some brain storming I decided to use the factory switches that came with the bezel to make it look as factory as possible while using my aftermarket switches.

I found through trial and error this paint matches the factory console metallic gray/black very nicely

I also wanted to do something with the door and console trim, I really like the carbon look on the All Terrain but they are out of stock through GM, so I smoothed my textured work truck trim and wrapped it in some vinyl which looks fantastic I will link it below.

https://www.amazon.com/VViViD-Black-Carbon-Gloss-Realistic/dp/B00YLFSFWA/ref=sr_1_3_sspa?crid=3I38QUGL81LQ5&keywords=gloss%2Bcarbon%2Bfiber%2Bvinyl%2Bwrap&qid=1691428419&sprefix=gloss%2Bca%2Caps%2C111&sr=8-3-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1

Edited August 7, 2023 by 04palass

slj2008 · August 7, 2023

2 hours ago, 04palass said:

Success!

Alot of work but I now have a fully functioning sliding rear window! I will do a write up shortly but I used a universal power window harness, spliced it all together and boom she works!

I had trim my rear window molding to fit with the sliding rear window.

I also did some other interior touch ups. When I got the truck it had the plane work truck interior with the matte black dash trim. I added trim from a LT Silverado but I did not know at the time that the Sierra and Silverado LT trim were different until I added the steering wheel. So I got some OEM Sierra SLT dash trim, but that came with an issue. It had the holes for the factory heated/cooled seats which my truck does not. So after some brain storming I decided to use the factory switches that came with the bezel to make it look as factory as possible while using my aftermarket switches.

I found through trial and error this paint matches the factory console metallic gray/black very nicely

I also wanted to do something with the door and console trim, I really like the carbon look on the All Terrain but they are out of stock through GM, so I smoothed my textured work truck trim and wrapped it in some vinyl which looks fantastic I will link it below.

https://www.amazon.com/VViViD-Black-Carbon-Gloss-Realistic/dp/B00YLFSFWA/ref=sr_1_3_sspa?crid=3I38QUGL81LQ5&keywords=gloss%2Bcarbon%2Bfiber%2Bvinyl%2Bwrap&qid=1691428419&sprefix=gloss%2Bca%2Caps%2C111&sr=8-3-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1

Any photo's of dash trim ??

04palass · August 8, 2023

20 hours ago, slj2008 said:

Any photo's of dash trim ??

Here is a side by side showing the difference (if that is what you mean). The Silverado is a more glossy/metallic silver. The Sierra is a low gloss almost stainless steel look.

TNTSierra · August 9, 2023

10 hours ago, 04palass said:

Here is a side by side showing the difference (if that is what you mean). The Silverado is a more glossy/metallic silver. The Sierra is a low gloss almost stainless steel look.

Yes the Denali has more of a bronze/silver look and the SLT was all Silver. I had two 2018's. One was a fully loaded SLT. And now I have the Denali. The Bronze/Silver has grown on me. I just can't stand the wood grain door handle and console trim.

04palass · August 14, 2023

In my never ending quest to dress up this truck I ordered some chrome speaker bezels. They look nice but fitment was terrible would not recommend them. But after some massaging they came out nice.