Jump to content

Reverse light mod ideas (no bulb replacement)

Baker17

By Baker17
in Modifications, Wheels & Tires

 Share

Recommended Posts

Baker17 Enthusiast

Baker17

Posted
Posted

I'm looking to add more light to the back of the truck (2023 Silverado 1500 LT) for more visibility when backing up in the dark. LED bulb replacement is not an option for me, since I have aftermarket tailights. 

 

I looked into VLED LP-X but customer support told me it wont work because Silverado's trailering system will interfere with it. I asked if I could wire tap into the cargo light wires, so that the lights turn on when I toggle on cargo lights, but he wasn't sure if that would work or not.

 

Anyone have tried VLEDS or any other types of lights for reverse light? Any recommendations welcome!

  • Replies 30
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

nlindste
nlindste

I used this wiring harness from amazon to tie into my factory lighting system. I have 2 rigid flush mounted lights in the pockets on the rear bumper.  It has zero effect on the trailering system.

GETGONE
GETGONE

The Curt harness won't work on a GM because the 7 way plug is dead except for 12V+ and ground unless it detects a trailer plugged in. You need the harness that plugs in between the tail light wiring t

PureZ71
PureZ71

I used podholes bracket and mounted some Baja Design S1 lights. They also came with a harness that turns them on when your cargo lights are turned on.   https://podholes.com/products/pod-hol

Posted Images

GETGONE Enthusiast

GETGONE

Posted
Posted

You will need to wire the lights into a relay. The factory circuit will overload and shut off the lights when you add any additional lights. You can use the reverse light wire in the tail light as the trigger wire for the circuit. You can use the 12V+ from the trailer wiring circuit as the power source for the relay circuit.

nlindste Enthusiast

nlindste

Posted
Posted

I used this wiring harness from amazon to tie into my factory lighting system. I have 2 rigid flush mounted lights in the pockets on the rear bumper.  It has zero effect on the trailering system.

All I did is tied into the connector.

 

https://www.amazon.com/OPT7-Redline-Connect-Harness-Silverado/dp/B09YCD82H3

 

https://www.amazon.com/Rigid-Industries-Diffused-Resistant-Accessories/dp/B01HJ4G9QI

 

 

20231204_142102.jpg

  • Like 1
  • 1 month later...
Rich Rein Enthusiast

Rich Rein

Posted
Posted (edited)
On 12/19/2023 at 10:10 PM, nlindste said:

I used this wiring harness from amazon to tie into my factory lighting system. I have 2 rigid flush mounted lights in the pockets on the rear bumper.  It has zero effect on the trailering system.

All I did is tied into the connector.

 

https://www.amazon.com/OPT7-Redline-Connect-Harness-Silverado/dp/B09YCD82H3

 

https://www.amazon.com/Rigid-Industries-Diffused-Resistant-Accessories/dp/B01HJ4G9QI

 

 

20231204_142102.jpg

@nlindste I am looking at doing something similar,and trying to visualize this all while parts are en route - does the putco harness go between the trailering plug and the body harness as well as have to tap/connect into the taillight harness? Or just behind the bumper, and then some connecting to whatever auxiliary reverse lights you are adding?

Edited by Rich Rein
  • 2 weeks later...
GETGONE Enthusiast

GETGONE

Posted
Posted

The Curt harness won't work on a GM because the 7 way plug is dead except for 12V+ and ground unless it detects a trailer plugged in. You need the harness that plugs in between the tail light wiring to get all the brake and turn signals working.

  • Like 1
Niklasbraun Enthusiast

Niklasbraun

Posted
Posted
On 12/19/2023 at 5:29 AM, Baker17 said:

I'm looking to add more light to the back of the truck (2023 Silverado 1500 LT) for more visibility when backing up in the dark. LED bulb replacement is not an option for me, since I have aftermarket tailights. 

 

I looked into VLED LP-X but customer support told me it wont work because Silverado's trailering system will interfere with it. I asked if I could wire tap into the cargo light wires, so that the lights turn on when I toggle on cargo lights, but he wasn't sure if that would work or not.

 

Anyone have tried VLEDS or any other types of lights for reverse light? Any recommendations welcome!

Have you considered auxiliary lights? I've had success with Rigid Industries D-Series lights. You can mount them strategically, and they're pretty bright.

Also, don't overlook the possibility of integrating fiber optic lighting You could discreetly embed them into the truck bed or along the bumper. Sync them up with your reverse lights without messing with the trailering setup.

Another idea is using motion-activated LED strips. Strategically position them in the bed, and they'll illuminate when you start reversing.

Rich Rein Enthusiast

Rich Rein

Posted
Posted (edited)
On 1/29/2024 at 11:25 PM, GETGONE said:

The Putco harness is a T that plugs in between the left and right tail light harnesses and then has a flat 4 plus a white wire for reverse lights.

https://www.putco.com/product/blade-quick-connect-harness/529005/

 

Just to follow up (in case this helps anyone else) - I used the Putco harness. The reverse power comes from the driver's side, as does 3 of the four wires for the extra 4 pin connector (the green power wire is the only one to come from the passenger's side). As I was only using the harness to power auxiliary reverse lights (which I wanted automatically tied in to my truck's reverse function, no extra switch needed), I cut off the 4 pin connector on the Putco harness (which means that I no longer needed the passenger side connection at all), and used the reverse wire and ground wire coming off of the driver's side piece of the harness (capping off the other two wires and hiding the ends in the loom). Power from my auxiliary lights connected to the white wire from the harness, ground from each light to the black wire...and I am in business. No issues, works exactly as I had hoped - and looks factory in the way that it all connects in (and easily removable without lasting effect because of the Putco harness).IMG_20240209_201518.thumb.jpg.fea708da14088ccf2246c16d6b78ad67.jpg

Edited by Rich Rein
Transient Senior Enthusiast

Transient

Posted
Posted

https://accessories.chevrolet.com/product/60-inch-blade-led-tailgate-light-bar-by-putco®-associated-accessories-19418352?bac=112629&body=Crew Cab Pickup&bodyId=22&bodyNumDoors=5&bodyNumDoorsId=5&categoryId=197502&make=Chevrolet&makeId=47&model=Silverado 1500&modelId=491&year=2023

 

and this

 

https://www.bajadesigns.com/products/s1-hitch-light-kit-universal/?sku=448153

GETGONE Enthusiast

GETGONE

Posted
Posted

That's a LOT of money for something you can't even use when you have your hitch in and NEED lights to hook or unhook a trailer in the dark!

SierraStorm21 Enthusiast

SierraStorm21

Posted
Posted
2 hours ago, GETGONE said:

That's a LOT of money for something you can't even use when you have your hitch in and NEED lights to hook or unhook a trailer in the dark!

It is...it went onsale during xmas time for $50 off which is still expensive imo. However for me, it'd work as I almost never tow anything, much less have to hook up in the dark. 

 

There's also the boostauto mod that's super cheap. How well it works I don't know. Was considering that too or maybe both

https://boostautoparts.com/products/bed-cargo-and-reverse-wiring-harness-2019?year=2021&make=GMC&model=Sierra 1500

GETGONE Enthusiast

GETGONE

Posted
Posted
12 hours ago, Mstorm18 said:

It is...it went onsale during xmas time for $50 off which is still expensive imo. However for me, it'd work as I almost never tow anything, much less have to hook up in the dark. 

 

There's also the boostauto mod that's super cheap. How well it works I don't know. Was considering that too or maybe both

https://boostautoparts.com/products/bed-cargo-and-reverse-wiring-harness-2019?year=2021&make=GMC&model=Sierra 1500

Why have a truck if you don't tow?

 

I made my own "boost auto" mod for a few cents. I have it set so the reverse lights come on when I press the cargo light button so it makes it super bright along with the LED cubes I added to the bottom of the hitch. Works great for hooking up a trailer or loading stuff in the bed in the dark.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Fish_truck
      Casey from the Texas Hill Country

      By Fish_truck · Posted

      Howdy! New to the forum of course! My name is Casey, just picked up a 2024 high country midnight edition. First “new” truck in 24 years for me. Driving a 1998 Z71 since 2002. Have been on the GMT400 forum with lots of good info and help there. Nervous about driving these newer trucks and all their electronics…. Did a lot of work on the Z71 myself over the years. New truck is definitely a nice upgrade after 24 years. Photo of the old and new, still keeping the Z71 - has 320,000 miles on her and still running well!  
    • KARNUT
      OCI, not when but why?

      By KARNUT · Posted

      We did 250 on our tractors until we switched to Amsoil. We doubled after that. 
    • PunchT37
      OCI, not when but why?

      By PunchT37 · Posted

      When I was there, most to all did not have an hour meter. They just did 5000 miles on regular vehicles and 3000 on police stuff. The modern oil change monitors should take into account engine hours, weather, etc. I don`t use the monitor on my stuff. I pull the stick, look at it, smell it, rub it between my fingers, etc. That`s my oci.   I have had many engines. Some bracket race. No problems doing things my way. I was in the mechanic business for 30 yrs or so. I still do things the old school way. Don`t care who laughs at me.   Understand, I was in the main shop. We didn`t do oil changes or tires. We had a service station for that. I don`t remember the hours they used for tractors, lawn mowers, etc. Something in my head says 250 hours.
    • Chuck FB
      OCI, not when but why?

      By Chuck FB · Posted

      I don't know how far back vehicles had hour meters, be it driver accessible or diag accessible but was wondering if there was any rule of thumb your shop came up with in regards to an hour limit on engine oil regardless of the miles on the oil.    I know with construction or farm equipment its almost always based on engine hours for maintenance scheduling as no other metric really applies other than a seasonal time limit that one self imposes on items like engine oil.  
    • Chuck FB
      OCI, not when but why?

      By Chuck FB · Posted

      I'm not sure what to say on that mess but I will say that is an odd thing for that mechanic to speculate on as per assuming its been run out of oil a few times as the odds of that engine having instead piled up with a complete seizure would be very high if such events had actually taken place. However there is nothing saying that the oil has ever been changed although once again, what filter was on that engine as that would tell part of the story if its possible to figure out if its a factory installed filter or not. Too many items unknown and a lot of speculation, but regardless of that its one fubared mess that is mind boggling to see for a vehicle that new and its hard to imagine how it ever made it that far in life looking at the top of the engine.    His scanners, I've watched him before here and there and I'd have to say if I recall correctly that some of his scanning equipment is one or two steps up from a child's Exo Sketch 😋

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...