Jump to content

I have returned..... with a Tahoe too!


SnakeEyeSS

Recommended Posts

Posted

:driving: Anyone remember me? I was quite the regular, until I sold my last GM in 2008 and bought the Mazda. This is the longest I have gone without one. (I haven't been on the site since after announcing my purchase, as I ran into a several who pretty much believed that Japanese cars in America were just the 2nd part of the invasion dating back to Pearl Harbor. :nonod: ) There were still a lot of good people here so I look foward to rejoining the community.

 

Anywho, I have returned, as I finally bought another. Basically, 6 week old twins should explain most of it. Loving it so far, but it has only been a day. Still don't know if I could buy a post 2009 one, still angry over the Government buyout and the ensuing fallout(was pretty set on getting one of those 350 combined HP Vue Hybrids with 36 MPG for the wife until they dumped it concentrate on the Volt).

 

Going to head over to the SUV forum and ask some questions on my newest addition to the garage(It's in amazing condition. Stopped by so the parents could see their grandkids and the "new" Truck and my Father was amazed at how nice it was. Someone took amazing care of it..... Only Thing I need is a knob for the rear HVAC)

 

Mervz, site is looking good!

 

Tahoequarterf.jpgTahoefront.jpg

Tahoeside.jpgTintB.jpg

TintM.jpgTintfront.jpg

 

 

And if anyone is wondering, the Mazda has still proven a fantastic purchase, even though it does have a lot of Ford components and built on the same line as the Mustang. Considering seeling one of the cars, but both will prove useful(Mazda is fun, and Corolla is efficient so might just keep them both)

  • Replies 32
  • Created
  • Last Reply
Posted

welcome back! Nice Tahoe

 

Wingnut hasnt been with us for some time

Posted

Welcome back Snake!!! Some of the other "old" crowd are still around at times. Good looking truck by the way. Good luck with it and those kids. :jester:

Posted

Welcome back, I personally have only been around the last couple of years. That's a sweet looking rig, should provide many years of good service. Good to hear when someone has such a good experience with other brands as well, I unfortunately haven't been so lucky minus a Jeep Cherokee I had years ago (still wish I kept it.)

Posted

welcome back! Nice Tahoe

 

Wingnut hasnt been with us for some time

 

Welcome back Snake!!! Some of the other "old" crowd are still around at times. Good looking truck by the way. Good luck with it and those kids. :jester:

 

 

Thanks. I remember you two. Nice Camaro, Ryan. Love the power folding seats, only to realize they will have car seat bases installed for many years to come. rendering the feature useless to me for many years to come. :lol: Was actually planning on getting a ZL1 for my next car. Might get put off a year or two now..... Miss mine, been gone for over 5 years now, Seems like yesterday:

barnshot.jpg

Posted

I was going to go for a ZL1 (was on a dealer list #2) but I went with this.

 

Car seats fit fine :)

 

Nice car in the picture

IMG_1649.JPG

IMG_1649.JPG

IMG_1649.JPG

IMG_1649.JPG

Posted

I was going to go for a ZL1 (was on a dealer list #2) but I went with this.

 

Car seats fit fine :)

 

Nice car in the picture

 

 

My wife wants another convertible since we sold the Corvette, and when I showed her a pic of the new ZL1 convertible.....she didn't do the immediate eye roll. GOOD SIGN!

Posted

welcome back, i was considering one of those before i bought my gmc, love the clean look of the white ones.

Posted

Congrats on the Tahoe!! (I own one too. I LOVE mine.) That is sweet looking.

Posted

Spent 4 hours on it today. Washed it, clay bar on a few spots(tar specks), removed the dealer logo(can we out law those already? Does anyone care besides the guy that gets paid to put them on?), waxed it(meguiars ultimate), cleaned/polished the wheels with Eagle One wadding polish, Then put some wax on the wheels. The dealer logo was covering up the remenants of the old dealer logo, that was fun.

 

My wife took it baby stuff shopping with her sister,mom and sisters kid. She said she loves it. (because it is easy to see since sits up high :noway:, but its scary to park). Have half the third row removed to fit the stroller(twins size stroller)

 

Two gripes on this front: why does the middle row only have LATCH points in the middle and passenger side? There are none in back, where the kids fit better than adults?

 

Ordered the K&N 57 gen 2 series FIPK. Amazon reviews have one guy getting about 1 mpg better, another getting almost 2 mpg better.

 

the 17.5hp/18.9Tq gain has nothing to do with it :ninja: . Nor the fact that peak on-the-dyno hp nears 275 and peak tq touches 280 with it. Nope. Not at all :ninja:

 

After calling one dealer that couldn't figure it out(and oddly, had another customer just ask for the same part), I called my old stand by dealer with awesome parts guys(not sure why I even called then second instead of first) and he was able to find the knob for $10 in texas, and ordered it for me. :ughdance:

 

So next week is going to be busy, get to cut up the grille and put in the billet, swap to billet emblems, install the FIPK, replace the knob(ok, I admit, thats not work)and whatever else I find to do

Posted

Congrats; LTZ is always a good choice!

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,903
    Total Members
    8,960
    Most Online
    RyGuy43
    Newest Member
    RyGuy43
    Joined
  • Who's Online   4 Members, 0 Anonymous, 380 Guests (See full list)

  • Latest Articles

  • Posts

    • This is NOT impact damage nor neglect. There were previous class action lawsuits because of such paint preparation st GM manufacturing plant. Not just the Cherry Red Color. This paint is applied in three processes to obtain the desired color.  The manufacturer will cover for 36 months or 36k miles only. That rust is actually corrosion because of the paint process failure. Corrosion is covered for 100,100 miles or a certain months. However their corrosion doesn't include this type. Go figure. Clearly manufacturer knew from previous paint issues. This started 3 weeks ago out of the blue.  
    • Is it time to put a piece of tape over the CEL? 
    • consider doing electrical testing?  I would guess some power or ground wire/connection has a problem.   alldata.com has wiring diagrams, connector pinouts and diagnostic procedures you can use to find where the problem is.
    • can you tell if the reader is actually trying to get codes, and the pcm is reporting none, or is your reader just silently failing because it's not communicating with the pcm?
    • Any joy with this truck seems to be short-lived.   The CEL for P0172 ("bank 1" too rich) is now "intermittent".   I'm not sure where to check, or re-check, and my energy to keep chasing problems with junk is wearing thin. The P0172 seems to set as I'm coming to a stop, completely off the throttle, when fully warm. At least, that's what it's done the 3? times it's set.   Everything appears normal on the scanner EXCEPT long term fuel trim. There's only one bank on this vehicle because it's an OBD 1.5 with only one upstream O2 sensor. At idle, it's around -16.4% and will dip to -18% occasionally at idle or off-throttle. LTFT approaches 0 when throttle is held at 2500rpm. Short term appears normal, much closer to zero all the time. The LTFT tells me the engine is running rich at idle but compensating at higher load. But, why?   The EVAP purge valve doesn't appear to be leaking/sucking fuel vapor continuously. Is it sticking just as I come to a stop and the engine is choking on fuel vapor and sets the P0172? But that doesn't explain the persistently negative LTFT. Disconnecting the purge valve doesn't seem to make any difference.   I suppose that leaves another dang issue with the fuel injector. A leaking fuel pressure regulator, a new leak in the spider, or a leaking fuel injector/poppet valve I didn't see, or a small crack in one of the spider legs.   The vacuum line leading to the fuel pressure regulator doesn't have raw fuel in it. It doesn't even smell like fuel when it's pulled off, not until you suck air through it, then you can tell it leads to a fuel component. I'd consider that normal? Nothing is signaling this is a FPR issue from the outside, at least.   The oil smells like fuel but it's not building volume. I've noticed most oil in most engines smells like fuel to some degree so it's hard to say if the smell is an issue or not. Or if the engine just still smells like fuel because the crankcase was full of it a few hundred miles ago. But it's been changed twice since that original issue of the leaking fuel line dumping fuel into the intake.   Patience is running very thin. Every win seems to be accompanied by two steps backwards, or another issue that leads to removing at least the top half of the intake manifold. Enough! LOL
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...