Jump to content

Recommended Posts

Posted

ive been testing 93 octane in my 6.2 however i'm seeing terrible mpg. i do all city driving, and its around 13.9 and has brought my lifetime down to like 14 or 15.

are you the first one to take off from a red light? If so that's why the mileage is so bad.

 

 

Sent from my iPhone using Tapatalk -

Posted

are you the first one to take off from a red light? If so that's why the mileage is so bad.

 

 

Sent from my iPhone using Tapatalk -

You can't just blame driving style. I had a 5.3 with 3.08 gears and my lifetime over 9000 miles was 14mpg. I would drive with the full intention of getting the best fuel economy possible, but it just wouldn't do it. It did have some good moments here and there, but when I went to a diesel 2500 I broke all my mpg records from that 1500.

 

It's a shitty problem to have because the dealers won't help out because it's easy to blame driving style.

 

 

Sent from my SGH-I337M using Tapatalk

Posted (edited)

I drive on the hard side and don't speed, don't need to in Texas speed limits are high. Im most often first to leave the light, my lifetime average on E85 and some 93 is 16 MPH. Most would be in town.

Edited by KARNUT
Posted

I drive on the hard side and don't speed, don't need to in Texas speed limits are high. Im most often first to leave the light, my lifetime average on E85 and some 93 is 16 MPH. Most would be in town.

I hope you're in the slow lane

  • Like 1
Posted

I hope you're in the slow lane

On the freeway its the Texas speed limit, go with the flow or get out the way.
Posted

You can't just blame driving style. I had a 5.3 with 3.08 gears and my lifetime over 9000 miles was 14mpg. I would drive with the full intention of getting the best fuel economy possible, but it just wouldn't do it. It did have some good moments here and there, but when I went to a diesel 2500 I broke all my mpg records from that 1500.

 

It's a shitty problem to have because the dealers won't help out because it's easy to blame driving style.

 

 

Sent from my SGH-I337M using Tapatalk

Not sure how yours was so low. Did you keep the tires properly inflated and all the other jazz that they say is necessary for good mileage? My 5.3 3.42 4x4 CCSB has had great mileage. My lifetime is 16 mpg. With about 85% of that being city and 15% highway. And about 20% of my overall has been with a lead foot cause it's nice to hear the exhaust!

 

 

Sent from my iPhone using Tapatalk

Posted

Tires were fine and I was 70 percent hwy. I towed a 6x12 enclosed trailer once for 100 miles and got 6mpg.

 

Sent from my SGH-I337M using Tapatalk

Posted

I drive on the hard side and don't speed, don't need to in Texas speed limits are high. Im most often first to leave the light, my lifetime average on E85 and some 93 is 16 MPH. Most would be in town.

 

 

I hope you're in the slow lane

 

 

On the freeway its the Texas speed limit, go with the flow or get out the way.

MPG* The speed limit is over 16 in Texas.

  • Like 1
Posted

 

 

 

 

MPG* The speed limit is over 16 in Texas.

Thanks, I know C~, MPG MPG MPG MPG MPG , Got it. Teacher can I go home now? MPG MPG MPG

Posted

Man I don't know what some of you are doing to get such low numbers.

 

DIC shows almost 20mpg, 25 mile average shows 26mpg, 50 mile average shows 22mpg, 400 mile average shows almost 20mpg. My hand calculated mileage shows anywhere from 18.75-20.5mpg on my weekly commute.

Posted

 

 

My hand calculated mileage shows anywhere from 18.75-20.5mpg on my weekly commute.

 

That's about spot on what I am seeing with my 6.2. It has settled into 18-19 on my normal weekly driving and if I can get out on the freeway for any amount of time it puts me at 20-21mpg.

Posted

What milage are you guys getting with the 5.3 ? I have a 2014 Sierra 1500 All terrain 20" wheels 5.3 4x4 Stickers epa said 16 - 22 I get 16 city and MAX 19 Hwy.....that 22 must be on a dyno at 40 mph.....

 

Sent from my SPH-L720 using Tapatalk

Posted

What milage are you guys getting with the 5.3 ? I have a 2014 Sierra 1500 All terrain 20" wheels 5.3 4x4 Stickers epa said 16 - 22 I get 16 city and MAX 19 Hwy.....that 22 must be on a dyno at 40 mph.....

 

Sent from my SPH-L720 using Tapatalk

EPA sticker on mine said 21 hwy. but I've seen 22-23 cruising between 70-75MPH (not drafting btw, but when I do I get 25MPG). City I can get 16MPG if I play it easy.

 

I've got right around 4600 miles on the truck. CCSB 4x4 with factory wrangler street tires. 275/55/20 5.3L with 3.42 gears.

 

 

Mine used to get around 18-19 mpg hwy. when I bought the truck I got 15-17 on the hwy drive home. But mileage seems to be getting better with more miles.

 

 

Sent from my iPhone using Tapatalk

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Welcome back! No, it definitely doesn't pass the sniff test. Even "ceasefire" needs an alternative definition these days.    $5.29 at Kroger today
    • That makes sense, and I think you are describing the real product problem. Capturing data is the easy part. If the owner or technician has to manually dig through five minutes of millisecond-level logs, the product has already failed. The device would be at the ECM harness, not at the OBD port, so I agree that data retrieval and event marking need to be thought through carefully. The way I am thinking about the architecture is: The recorder itself should not depend on a phone, app, Bluetooth, Wi-Fi, or cloud connection to capture the event. It should always keep a local rolling buffer and lock the event locally. A button, phone app, or small cabin device would only act as an event marker. If the driver feels a stumble and presses the button 10–30 seconds later, the pre-buffer has to already contain the useful data. For data retrieval, the practical options would be a sealed service USB lead, Wi-Fi download, or a phone/cabin companion device. I would not expect the owner to remove the ECM-side module or work with raw files directly. The cloud or AI side would be for interpretation, not for capturing the event. The truck may have no connection when the issue happens, so the evidence has to be saved locally first. After that, cloud processing could help decode the data, compare it against baselines, and generate a readable report. For the first version, I would keep the automatic triggers conservative and objective: driver event marker bus-off error passive voltage drop / brownout device reset FIFO or queue overflow a normally periodic message disappearing side-to-side communication mismatch, if the topology supports that For “learning normal,” I agree with your point, but I would not want to overclaim it as automatic root-cause diagnosis at first. A realistic first step would be learned baseline comparison for that specific vehicle and operating condition. For example, a value would only be compared against similar conditions: RPM range load / MAP throttle position gear / vehicle speed coolant and oil temperature battery voltage AFM/DFM state, if decoded and validated Then the report could flag things like: this periodic message disappeared compared with its normal timing this value deviated from this vehicle’s normal range under similar conditions the same abnormal pattern repeated after the same type of event the anomaly occurred together with voltage, oil-pressure, misfire, or communication changes But I would still call that “abnormal pattern detected,” not “replace this part,” unless there is enough validated repair data behind it. So the intended product would not be “here is a huge log.” It would need to be an event package: what triggered the capture how much pre/post data was preserved what changed before and after the event whether the device itself reset, overflowed, or saw a bus error selected graphs around the event raw data only as supporting evidence From your perspective, what would make this kind of report useful instead of just another datalog? For example: What are the top 5 parameters or events you would want highlighted first? Would you trust a learned baseline for that specific vehicle, or would you prefer fixed thresholds? How much false-positive flagging would be acceptable before you stopped looking at the reports? What would a one-page report need to show for an independent shop to take it seriously? For misfire, AFM/DFM, oil pressure, or U-code complaints, what would you want the tool to flag automatically?
    • 2024 Silverado 2500 HD LTZ grille no camera Parts list   84603331 84913656 84913657 84913654 84913655 84911567 84911568 85646092 85646093 85797921 85797922   11570637  x10-15   grille/bumper bolts 11546500  x10      grille clips 11571006  x10      push/retainer clips 11546454  x6       nut retainers 11611609  x6       M5 bolts 11610700  x6       molding/trim retainers
    • And use RA's 5% discount code if you buy from them.  google for the code, one is always available.
    • Just don't turn the steering wheel as much?
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...