Post Pics of Your 2014+

gatoroi · January 16, 2015

Got her all cleaned up

pdv127 · January 17, 2015

Good to know... I measured the Rigid Lights at SEMA and the height of the lights are 2" not including frame.... The Gaps in the AT grille are exactly 2" but I would love to see how it would fit before purchasing.

Im sure you could make it happen if you really want to. Light would shine through the slots in the grille for sure, but some of the LEDs might be covered up due to the curve of the grille. Its hard to explain, but i did it on my 2007 NNBS Sierra with a 20" Rigid double row light bar and i will attach some pictures. I measured the grille slots on my old truck just like you said you did and if i can remember correctly the slot was around 2 to 2.5", just

a little bigger than the 2014 grilles, so I decided to put one it thinking it would fit, but the curve of the grille covers up some of the LEDs so i trimmed some of the black plastic off the grille to try and make the LEDs all shine through. But if you really want to get that double row then go for it. If theres a will theres a way

Sent from my iPhone using Tapatalk

pdv127 · January 17, 2015

Got her all cleaned up

Is that black vinyl between your windows on the doors? Ive been wanting to do this for a while but I'm trying to decide what to use

gatoroi · January 17, 2015

Is that black vinyl between your windows on the doors? Ive been wanting to do this for a while but I'm trying to decide what to use

Yes its gloss black. I think it gives it a cleaner look

pdv127 · January 17, 2015

Yes its gloss black. I think it gives it a cleaner look

Yeah it looks more like its one big window and thats what I'm going for. Where did you get yours and how has it been holding up?

gatoroi · January 17, 2015

Yeah it looks more like its one big window and thats what I'm going for. Where did you get yours and how has it been holding up?

I got it from a local shop. Its made by a company called ritrama. Its holding well. I just pressure washed it and it held fine.

redwngr · January 17, 2015

Sorry, I think it makes it look more like a Ford....

BSCLTZ · January 17, 2015

gmtech117 · January 17, 2015

Bscltz details on wheel and tire size?

BSCLTZ · January 19, 2015

Wheels are Fuel (Mavrick) 20x9 machined finish and tires are factory Goodyear 275/55/20's

AZGMCZ71Leveled · January 19, 2015

Anyone have pics of the inner and outer chrome 2014+ grill painted black? I have been out of town and have my grill scheduled to get color matched. I am temping to paint the inner chrome parts too or just replace with a new grill. I seen it on a white gmc where the whole grill was painted gloss black on a white truck. It looked sikk but don't know if it would look good on silver. I love the color matched AT grill / bumper and still hunting a set down. Hoping to score a silver set. I just don't trust chrome bumpers painted. I also have a titanium matte wrap on my mind but don't know if I want to commit to a full wrap .

Sent from my iPhone using Tapatalk

HiggySTL · January 19, 2015

I finally got a picture this weekend. It was nice enough outside finally to give her a wash.

5RWill · January 19, 2015

Looks great Higgy what level?

HiggySTL · January 19, 2015

what level?

Thanks Will!

It has a 2.5" "level" kit and the trim "level" is SLE with all/most of the option packages minus tow, leather, heated/cooled seats. With my previous truck heated seat were a must with leather IMO, but I don't miss it at all with the cloth seats.

CrimsonWall23 · January 19, 2015

Put my RC 2 inch leveling kit on mine this weekend. Brought it up 2 1/4 inches in the front. For those of you that have installed it yourself did anyone have as much trouble as me getting the ball joints to separate. Had to go buy a ball joint separator. I have a z71 4x4 with rancho shocks and mine didn't go near as easy as all the videos I saw. It looked like the lower a arm is a little different on the 2014s which made it seem like it was much harder to pry the shock over the spacer. I was doing it myself so that may be why. It definitely wasn't an hour and half job like some have done on here. I spent that almost on the first ball joint and then the other side started so I went and got a separator. Broke the rubber thing to do it so probably won't hold grease to well so probably be replacing a ball joint sooner than normal. Not sure if pics posted