whodatfan Posted May 28, 2014 Posted May 28, 2014 Anyone know how much of an adjustment they made to headlights after 2" shackle drop? Sent from my HTC One using Tapatalk
N2Black Posted June 1, 2014 Posted June 1, 2014 I installed my two in drop yesterday on my 14. The hardest part of the whole thing was folding over the bed seam to get the bolt out. If I didn't have to do that it would have been about an hour job. To make the job easier I cut the lip on one side of the bolt so it would go back easier. I have the 1/2 in block but the alignment holes didn't fit and it didn't lay flat. LTZ Tom what did you do to make it fit? He is the before and after.
Yotaman Posted June 1, 2014 Posted June 1, 2014 Before and After 2" Rough Country drop shackles. I may remove the blocks to go a bit lower ?? I thought that it would sit a bit lower but may get used to it. Also 2nd pic has weathertech mudflaps.
whodatfan Posted June 4, 2014 Posted June 4, 2014 Before and After 2" Rough Country drop shackles. I may remove the blocks to go a bit lower ?? I thought that it would sit a bit lower but may get used to it. Also 2nd pic has weathertech mudflaps. Dont do it. It is perfect the way it stands right now. The two inch drop shackle gives the truck a perfect stance. Leaves the back just 1 inch higher than the front. I have the same drop on my truck. I was going to take the blocks out too but loved the stance like it is. Here is a pick I took after the new exhaust. Sent from my HTC One using Tapatalk 3
Yotaman Posted June 4, 2014 Posted June 4, 2014 Dont do it. It is perfect the way it stands right now. The two inch drop shackle gives the truck a perfect stance. Leaves the back just 1 inch higher than the front. I have the same drop on my truck. I was going to take the blocks out too but loved the stance like it is. Here is a pick I took after the new exhaust. Sent from my HTC One using Tapatalk Thanks for the reply !! very sharp looking truck. I will probably keep mine at it's current height too. Yotaman
Eastcoastmarine Posted June 5, 2014 Posted June 5, 2014 Whodatfan, what size rims and tires do you have on there?
whodatfan Posted June 5, 2014 Posted June 5, 2014 Whodatfan, what size rims and tires do you have on there?22" dub skillz with 305/40/22 tires Sent from my HTC One using Tapatalk
Eastcoastmarine Posted June 5, 2014 Posted June 5, 2014 You have any other pictures of the side of the truck? Not sure if I want to go 22 or 24
brentadams646 Posted June 6, 2014 Posted June 6, 2014 Just ordered 3/5 DJM kit with upper and lower control arms, rear pinon adjustable flip kit and rear shocks.
2014blacksinglecab Posted June 7, 2014 Posted June 7, 2014 Just ordered 3/5 DJM kit with upper and lower control arms, rear pinon adjustable flip kit and rear shocks. I installed a djm 4/6 drop when i had my 02 sierra, it rode great and the control arms allowed it to get a good alingnment, no issues like with this POS I got now. Sent from my iPhone using Tapatalk
brentadams646 Posted June 11, 2014 Posted June 11, 2014 Anyone using a rear flip kit have problems with the rear wheels centering in the rear fenders? From what I have read is that all of the kits for the 14's are using the same parts that were for the previous generation trucks and the rear flip kit drop in the rear pushes the rear wheels towards the rear of the fender opening about 1". The only kit that doesnt do this is mcgaughys.
Cook Posted June 13, 2014 Posted June 13, 2014 I have a 2014 rcsb. I'm thinking removing the blocks and having the shackle at 1" so I don't have to cut the bed seam. Thoughts?
Cook Posted June 13, 2014 Posted June 13, 2014 Also where are you guys buying your shorter u bolts? 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now