Sign up for FREE! Become a GM-Trucks.com Member Today!
In 20 seconds you can become part of the worlds largest and oldest community discussing General Motors, Chevrolet and GMC branded pickups, crossovers, and SUVs. From buying research to owner support, join 1.5 MILLION GM Truck Enthusiasts every month who use GM-Trucks.com as a daily part of their ownership experience.
By 2002 Chevy Avalanche
My 2002 chevy Avalanche 1500 Z71 5.3l has 37s mud tires on it, 20 inch rim's, and the abs light turns on and turns right back off on the high way, and then stays off, i heard it not very good for off roading either, which is something i enjoy doing, i read, and some people really hate ABS as it turns out. And they said to just pull the fuse, after i pulled the fuse, i expected the abs light to turn on, but when i looked both the ABS and Brake light were on, any ideas how i can turn that brake light off? The truck still stops good, and there are no problems, just a stupid brake light.
By Jonathan Floyd
Hey guys and gals I was hoping y’all could answer a question of mine. I currently own a 2019 Silverado trail boss with the 5.3 and 6 speed transmission. A mechanic told me the transmission is a ticking time bomb if I do any performance mods. Such as a cam swap and tune. So I explained my plan for the future. Cold air intake, flow master exhaust, headers, tune and cam swap. He said if I do any of the big changes to the engine the tranny may go out. The reason why is because the stock transmission was only made to handle the stock HP and TQ. Have any of y’all had an issue like this after some big performance mods?
I'm finding the brake pedal very noisy. I don't have any braking issues. Every time i press the pedal especially with the radio off, i can hear a loud whoosh and the switch clicking. If this is normal, then it's definitely the loudest brake pedal I have ever experienced. I'm trying to get a consensus if it's normal so i don't waste my time taking it to the dealer. I tried to capture the sound but it doesn't record very well. Full disclaimer that i'm a little more sensitive to noises than most.
Any one else experience this or is it normal?
I have a 2017 Chevy Silverado 3500 HD High Country with 6.6 diesel equipped with tow package. It has dedicated trailer brake and trailer fuses within the primary fuse box under the hood. My passenger side trailer blinkers and brake lights are not working. I've traced the lack of 12v power all the way up to the 10a fuse dedicated to the right side trailer brake/signal light (fuse #17). I have replaced the fuse, re-tested, and still no power. The left side trailer brake/signal light (fuse #14) has 12v power going to it, tested on the top of the fuse when the flashers are on, but the right side has nothing. I've also swapped and then replaced the trailer parking lights relay switch (relay #63) and still nothing. Is this most likely an issue with fuse box or something else supplying power or ground to the fuse box? Thanks for the help... this is the craziest thing.
Recently Browsing 0 members
No registered users viewing this page.
Most OnlineNewest Member
Who's Online 32 Members, 0 Anonymous, 788 Guests (See full list)
- Justyn Torralva
- Ben Berkenpas