Jump to content

Recommended Posts

Posted (edited)

I sent you a pm

. Thanks for all the help. I was able to get everything working (front sub only for charging) as it should. This site is great.

Before

post-145039-0-75108400-1436919573_thumb.jpg

post-145039-0-75108400-1436919573_thumb.jpg

post-145039-0-75108400-1436919573_thumb.jpg

post-145039-0-75108400-1436919573_thumb.jpg

Edited by 02cetransam
  • Like 2
Posted

I just tried to order a center console.

 

I ordered 23466995 and was told it is permanently out of stock.

 

The other PNs I tried to order with it were:

22776807

22817347

22817349

22995086

 

I have black interior with "synthesis" (plain silver) trim.

 

I inquired again about the console and was told the PN I actually needed was 23466980.

 

Currently checking availability on this part. Has anyone ordered with 23466980? Is it the same as 23466995? Why is GM changing PNs?

I used these part numbers. The only thing extra needed to buy are the two bolts and an micro usb cable to make a male to male connection are you are set go.

  • Like 2
Posted

Here is a list of prices and corresponding item number I used for my conversion. I purchased everything through gmpartsdirect as I found them to be the cheapest over all.

 

--------------------------------------------------------
Part: 22776807*
Category: All
Description: BRACKET
Min.Qty: 1
Unit Price: $13.09
Quantity: 1
Ext.Price: $13.09
Core Charge: $0.00
--------------------------------------------------------
Part: 22817347*
Category: All
Description: PANEL
Min.Qty: 1
Unit Price: $20.62
Quantity: 1
Ext.Price: $20.62
Core Charge: $0.00
--------------------------------------------------------
Part: 22995086*
Category: All
Description: PLATE
Min.Qty: 1
Unit Price: $145.52
Quantity: 1
Ext.Price: $145.52
Core Charge: $0.00
--------------------------------------------------------
Part: 23466980*
Category: All
Description: CONSOLE
Min.Qty: 1
Unit Price: $318.91
Quantity: 1
Ext.Price: $318.91
Core Charge: $0.00
--------------------------------------------------------
Part: 23467516*
Category: All
Description: PANEL
Min.Qty: 1
Unit Price: $21.27
Quantity: 1
Ext.Price: $21.27
Core Charge: $0.00
==================================================================

SUB TOTAL: $519.41
SHIPPING: $103.87
TAX: $0.00
TOTAL WITH TAXES: $ 623.28 * indicates special order item, which is a special order non-returnable part.

  • Like 1
Posted

After

Looks great. I'm thinking of doing it, how hard was it? How long did it take you?

Posted

Looks great. I'm thinking of doing it, how hard was it? How long did it take you?

I spent quite some time on the fence as to whether or not it was worth the time and money to complete this conversion. Looking bad, it was 100% worth it as the console is so much more functional than the bench seat and besides, it looks classy. That being said, for the members who posted earlier on that said it can be completed in 2 hours, I'm not sure how that's possible. I think realistically it will take 4 to 6 hours to complete. It's not a difficult job but it just takes time especially if you want to do a clean installation, having everything working and solder all the connections. The instructions posted here at well done and I am grateful for everyone who has contributed. My only suggestion is not taking off the radio bezel stuff (not needed as you can install bracket using the cubbyhole after you remove ashtray) and using an end off your extra wiring harness to power up the usb ports as it will provide a factory connection (there are 4 wires but you only need to use 2 of them; red and black).

Posted

I'm ordering everything today. I didn't see it mentioned anywhere or I missed it, but the plate #22995086 comes with the cupholders? or with the console #23466980?

Posted

Cup holder come with the plate. The 2 missing bolts you will need are m6x1.0 x 1 inch length. All the project is doable in about 2 to 3 hours. Took 2 hours to do the last one I did.

Posted

Has anyone successfully used the glove box USB cabling on a 2015 for the console front ports?

Posted

Tried that. No sucess. Seems like it should work but it doesn't and I guess I don't care.

  • 2 weeks later...
Posted

Hey guys I did the swap last night everything is working but I cant get the 3 USB'S TO CHARGE any help would be good... I don't need them to go to the HDU but just need them to charge.

 

I seen some of you guys got it to work..

 

Let me know...

 

Thanks,

So much

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,894
    Total Members
    8,960
    Most Online
    TopBo
    Newest Member
    TopBo
    Joined
  • Who's Online   0 Members, 0 Anonymous, 642 Guests (See full list)

    • There are no registered users currently online

  • Latest Articles

  • Posts

    • not all plugs will be used.  gm uses more generic harnesses that support most/all options, and if your truck doesn't have a specfiic option, the plug won't be used (commonly will have a dummy insert in the plug , or it'll be taped up, but some may just be left as is).  But it's sldo possible some p.o. has installed the wrong/cheaper parts that aren't correct for your vehicle...
    • First off, I'm not trying to just get easy advice/fixes for the issues I've noticed so far.  I'll be combing through the site via searches and such, and if past experiences are any indication, should find what I need.  For the sake of conversation, though, I figured I'd post the handful of things I've noticed in the 12 hours since buying my 2010 SLE CCSB.     Indicator lights: Airbag and TPMS.  The tire pressures aren't reading for any of the wheels, so I'm pretty certain the sensors were either removed, are damaged, or are otherwise inoperable.  I used to mount and balance tires 25 years ago but am pretty much ignorant when it comes to TPMS.  My 2006 didn't have the sensors and this might be the fourth vehicle I've owned that does.     Radio: Rear speakers aren't working.  I removed the driver's side rear door panel and checked the speaker and wiring.  I also removed the sill and b-pillar covers to check the wiring.  A few minutes of Google Fu showed that this is potentially a head unit issue.    Switches: Power mirrors don't turn left/right.  I ordered replacement driver's door switches that should arrive tomorrow.  The windows and locks work but it was only about $20 for all of them.  The driver's side rear window switch lets the window down but won't put it back up.  I think the passenger rear doesn't work at all.  In the coming days/weeks, I'll break out my multimeter to check all of that.   Unknown wiring harness: There's a box attached to the front driver's side of the engine compartment, right where the second battery shelf is located.  There are three plugs, one of which looks like it fits a standard headlight-style bulb (9007 or similar).  It doesn't look like it's plugged into anything.  I'll do some digging and if I don't see anything elsewhere on the site, post some pictures here.   Unknown plugs on brake booster: There are at least two female plugs on the brake booster that aren't being used.  I think it might be a replacement/aftermarket, so maybe those are used for a different application, as there don't seem to be any unplugged harnesses and no indicator lights are on.   Little squeaks when turning: Sounds almost like a bushing around the bed of the truck.  I'll have to pay close attention as I get more familiar with the truck.   Clunk on acceleration: possibly the infamous drivetrain clunk.  My 2006 had it and I'm just not familiar enough with this truck yet to fully grasp what it is.   Anyway, my apologies for the vague and all over the place post.  This truck is new to me, and it's been four years since I drove my 2006.  With 200k miles, I know I'll need to learn this truck quickly to avoid having any major issues, despite being confident it's got much more life to it.  My 2006 had nearly 320k on it when I parked it (nearly 300k of which I put on the truck), and it was still drivable then, though I suspected the head gasket might have blown.  I'd hoped to have that truck back by now, but it's gone forever, as I detailed in my reintroduction thread.  
    • I always drive in Sport mode. With more driving, I am finding the initial response when accelerating is much quicker now🖕 Lou
    • Is it an optical illusion in the pic or is the truck really squatting that much horribly?
    • My initial introduction was here.  It's hard to believe that I last posted in February 2013, having just deployed to Kyrgyzstan.  Since then, I've retired from the military and the 2006 Sierra SLT Z71 that first brought me to these pages was lost.  I went forward to Afghanistan in March 2013 and did a lot of sitting behind a computer on brigade staff.  Within 18 months of getting back to the States, I was selected for Drill Sergeant duty, after which I moved back to Virginia (my home state and where I served from 2004-2008).  That '06 Sierra did a lot of driving between Louisiana, Georgia, and Virginia, and ended up with nearly 320k miles by 2022.  By then, the registration had been expired for a couple of years, but the pandemic had all but eliminated tickets for such transgressions.  Admittedly too, I usually drove my wife's SUV or son's car the 2-3 times a week I had to report to work.  Teleworking sure was fun while it lasted.   I started my retirement leave four years ago and stored the Sierra at my sister's house.  A big mess was made when her fiancé passed while she was taking care of business out-of-state in late-2024, and his son pretty much mismanaged everything to do with the estate.  Even so, I was assured that my truck was safe... until it wasn't.  I found out that my truck had been scrapped about four months after the son took over everything.  There's nothing I could do; I'm 1000 miles away and it was technically abandoned property since he'd even trespassed my sister from her own house (she had no claim to it as she wasn't married, and the fiancé was the sole owner).     Anyway, today I got my second Sierra.  This is a 2010 SLE 2WB CCSB with a little over 200k miles on it.  It's got the 5.3L I'm familiar with and should handle what I need it for.  Hauling stuff that won't fit in the Transit Connect (yep, I sold out, but that's the wife's vehicle) and towing a few times a year tops.  The price seemed decent, considering how much people sell their trucks for in the Deep South: $4500.  I've seen similar trucks listed for more than double that.  I got it from a coworker who left his tag on until we transfer the title next week (Louisiana requires a notary for transfers), so I've been driving it all day.  The rear speakers don't work, which is one of the things that brought me back to these forums earlier.  I can't say how active I'll be as a poster, but I'll be scouring the archives while I find out every little thing I can about the 2010s and particular nuances/problems with my truck.   It's definitely not a GMC, but I got another Willys Jeep a few months back as well, so I'm almost at the same place I was when I first joined gm-trucks.com.  My old 1960 DJ3A was sold back around 2010 or 2011; my current Jeep is a 1946 CJ2A.  So, I've got a slightly newer GMC and a much older Jeep.  I kind of wish I still had that F-250 I had way back when too.  The Dakota is long gone and was technically my brother's truck, though I had it registered and insured.  The F-250 had to go when my grandmother's house was foreclosed on due to mismanagement around 2012 or so.     Hopefully anyone that made it this far isn't too annoyed.  I tend to be long-winded, but I'll be doing more reading than posting in the coming months.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...