What have you done to your K2 today?

Rewillia · April 27, 2014

Ordered a set of the black grid with silver countersink pedals and floor kick plate today from Performance Pedals. They state 3-weeks to manufacture and deliver. They should look sharp with the black interior and floor carpeting.

Edited April 28, 2014 by Rewillia

Dres79 · April 28, 2014

Added OEM navigation. Literally took 30mins.

Sent from my iPhone using Tapatalk

TX14Z71 · April 28, 2014

Order a set of the Black Grid with Silver Countersink Pedals and Floor Kick plate today from Performance Pedals. They state 3-weeks to manufacture and deliver. They should look sharp with the Black interior and floor carpeting.

please post pics when you install.

Chevyrcg · April 28, 2014

Pulled the DIC surround and wrapped it with Carbon Fiber...

patriot · April 28, 2014

That's a nice look.

Mike1220 · April 28, 2014

Pulled the DIC surround and wrapped it with Carbon Fiber...

Damn. That looks nice!

Where'd you get the wrap from?

What brand?

How much?

Do you plan to do other assorted trim pieces such as the steering wheel and wood trim on door and center console?

Sent from my iPhone using Tapatalk

patriot · April 28, 2014

I added Weathertech floor mats, and the GM chrome bug shield. That's it for today.

I was going to put in the bedliner, but they gave me the wrong one. It goes back tomorrow.

punk007 · April 28, 2014

Pulled the DIC surround and wrapped it with Carbon Fiber...

That looks great. I'd like to know more details about it also.

Mad Max · April 28, 2014

I also like that carbon fiber look. Did you wrap the original bezel or was it a new item?

Today I picked up the black touch up paint I ordered earlier from the dealer for those parking lot idiot dings. While I was at the dealer I also picked up the Chevy dashboard sun screen for the big black truck! Gets just a little hot in there on a sunny day - just a little.

krzyd · April 28, 2014

Custom Tune Now!

Mad Max · April 29, 2014

Shouldn't I cold air intake it first for a proper tune?

Chevyrcg · April 29, 2014

Damn. That looks nice!

Where'd you get the wrap from?

What brand?

How much?

Do you plan to do other assorted trim pieces such as the steering wheel and wood trim on door and center console?

Sent from my iPhone using Tapatalk

MIke, I own a graphics company so i have access to a lot of cosmetic materials and the ability to do them cheaply. I do Screen Printing, Embroidery, and Large Format Digital Graphics (54” inkjet for signs, banners, posters, vehicle graphics, lettering and wraps). The wrap I used for the center DIC surround is 3M 1080 Black Carbon Fiber, and is about $4.00 a square foot. Compared to other vinyls it is pretty pricey, but 3M always is because it is the best material out there. There are other brands that aren’t quite as expensive but anything in Carbon Fiber is going to be pricey. If you go to my build page you will see the other parts of the interior I have done, as well as rally stripes on the hood with the same material. The DIC surround was the only piece so far I removed to wrap, all the other pieces were done in place. Here is the link to my build page, if you go through it you will see the various other parts hive used the Carbon Fiber on.

http://www.gm-trucks.com/forums/topic/159461-chevyrcgs-2014-silverado-lt-double-cab-build/page-2'>http://www.gm-trucks.com/forums/topic/159461-chevyrcgs-2014-silverado-lt-double-cab-build/page-2'>http://www.gm-trucks.com/forums/topic/159461-chevyrcgs-2014-silverado-lt-double-cab-build/page-2'>http://www.gm-trucks.com/forums/topic/159461-chevyrcgs-2014-silverado-lt-double-cab-build/page-2

if you have any other questions hit me up I will be glad to help……. Thanks

That looks great. I'd like to know more details about it also.

Punk…., I own a graphics company so i have access to a lot of cosmetic materials and the ability to do them cheaply. I do Screen Printing, Embroidery, and Large Format Digital Graphics (54” inkjet for signs, banners, posters, vehicle graphics, lettering and wraps). The wrap I used for the center DIC surround is 3M 1080 Black Carbon Fiber, and is about $4.00 a square foot. Compared to other vinyls it is pretty pricey, but 3M always is because it is the best material out there. There are other brands that aren’t quite as expensive but anything in Carbon Fiber is going to be pricey. If you go to my build page you will see the other parts of the interior I have done, as well as rally stripes on the hood with the same material. The DIC surround was the only piece so far I removed to wrap, all the other pieces were done in place. Here is the link to my build page, if you go through it you will see the various other parts hive used the Carbon Fiber on.

http://www.gm-trucks.com/forums/topic/159461-chevyrcgs-2014-silverado-lt-double-cab-build/page-2

if you have any other questions hit me up I will be glad to help……. Thanks

Edited April 29, 2014 by Chevyrcg

Chevyrcg · April 29, 2014

I also like that carbon fiber look. Did you wrap the original bezel or was it a new item?

Today I picked up the black touch up paint I ordered earlier from the dealer for those parking lot idiot dings. While I was at the dealer I also picked up the Chevy dashboard sun screen for the big black truck! Gets just a little hot in there on a sunny day - just a little.

Max, I just removed the DIC surround bezel, I ran across a good you tube video of how to take it off, it’s really easy. Wrapped it after I removed it. Any of the other bits I have done were left in place when I wrapped them, because of the way this piece is mounted to the dash i wanted to get the material behind the outer edges. Check out my build page, there’s pictures of the other pieces done,

http://www.gm-trucks.com/forums/topic/159461-chevyrcgs-2014-silverado-lt-double-cab-build/page-2

if you have any other questions hit me up I will be glad to help……. Thanks