Jump to content

Weathertech Floor Mats


Recommended Posts

Posted

I originally had the Weathertech mats in my Sierra , 2 sets actually . First ones curled , returned them and the second set was redesigned to eliminate that . Well it really did not . Ordered the Husky Xacts and could not be happier . I did keep the WT for the rear though serves its purpose and has not curled or anything . As far as color I would go black to mix it up with the Cocoa Dune a bit .

  • Replies 46
  • Created
  • Last Reply
Posted

OP, I've had Weathertech mats in my trucks for years. So when I ordered my 2015 Silverado it was a foregone conclusion that I would order a set as soon as I took possession. For the first time I'm disappointed. The mats seem thinner than earlier years, and several have curled around the edges which looks like crap and doesn't keep the dirt off as well as it could. I'm not sure I'd order another set, I think they're overpriced for what you get!!!

Posted

I've got the all-terrain mats in my Z71 and am very pleased. I do have the WeatherTech mats in the Traverse and have been very pleased with them. They fit great in all 3 rows and don't slide around. Maybe the ones for some trucks aren't molded as well?

Posted

i full husky set...front, rear mat the covers the whole rear, and the husky corgo storage...i posted pics somewhere i see if i can find them

Posted

for the record we have weathertechs in our works trucks and i hate them...the dont stay in place, the fit sucks...kinda the reason i didnt get them for my truck

Posted

We got Huskys for my wifes suv 2 years ago and loved them. Just scored a set if Huskys off craigslist for my 15 silvy for $75.00 today, only had 3k miles of use. I like huskys better more thick plasticy then rubbery. Vs weathertechs are more rubbery then palsticy. And i know someone who knows weathertechs cost $.17 cents per set to make after they recouped their initial investment.

We got Huskys for my wifes suv 2 years ago and loved them. Just scored a set if Huskys off craigslist for my 15 silvy for $75.00 today, only had 3k miles of use. I like huskys better more thick plasticy then rubbery. Vs weathertechs are more rubbery then palsticy. And i know someone who knows weathertechs cost $.17 cents per set to make after they recouped their initial investment.

Posted

I know not weather tech but just received husky xact fronts and weatherbeater for rear. Couldn't be happier with fit and finish.

Posted

Guy I work with got WT for Christmas from wife. We were talking about it today how much worse they are than the huskys. I have huskys and hands down 10 times better. Amazon has great prices on the huskys too.

Posted

I had Weathertechs in my last truck. The drivers side actually wore a bad spot in my door panel. Next set will be the Husky's.

Posted

I have a white Sierra with the cocoa dune interior. I couldn't decide on color either. I finally ended up ordering black Weather Tech for the front and back. The black looks really good inside and don't have to worry about the tan not being the same as the tan in the truck. If I had to order another set for the same truck I'd probably order Husky for the front and the Weather Tech for the back since it's a crew cab and the back one fit perfect and cover the whole rear cab. The front passenger just won't stay done correctly on one end.

Posted

Lloyd mats are generally what I buy for my vehicles. You can get custom colors, embroidery, edging, material..... Everything from Berber and plush carpet to plastic, and the fit is always spot on.

 

I just ordered a set in Berber for my Denali. Black…. They are made to order, so I should have them in about two weeks.

 

http://lloydmats.com/

Posted

If you live someplace where snow, salt, mud, dirt, grime, and the like aren't of much concern, those are probably nice mats.

 

Since their "all weather" mats have no sides to them, I would never trust them to protect my carpet in the winter months at least. The Husky Liners have fairly tall sides to them to keep large piles of snow (salt), sand, mud, and similar from having a chance of touching the vehicle carpet.

Posted

I've got the all-terrain mats in my Z71 and am very pleased. I do have the WeatherTech mats in the Traverse and have been very pleased with them. They fit great in all 3 rows and don't slide around. Maybe the ones for some trucks aren't molded as well?

Do you have the molded OEM ones with the GMC logo on them? If so can you post pictures of how they fit?

Posted

Do you have the molded OEM ones with the GMC logo on them? If so can you post pictures of how they fit?

No, mine are the vinyl ones without the logo. They have deep, long-running ribs. They've been very good. I thought about carpeted ones, but like the idea of vinyl mats in a truck better.

Posted

If you live someplace where snow, salt, mud, dirt, grime, and the like aren't of much concern, those are probably nice mats.

 

Since their "all weather" mats have no sides to them, I would never trust them to protect my carpet in the winter months at least. The Husky Liners have fairly tall sides to them to keep large piles of snow (salt), sand, mud, and similar from having a chance of touching the vehicle carpet.

 

I can't argue against that..... If you are the type that gets in the truck without kicking crap off your boots, I'd say stick with the Husky type liner too..... Or, if you tend to get mud all over the place.

 

I do live where there is snow and ice melt. We average about 500" per year. I used to buy those liners with high sides, dealt with them bending/folding, my feet slipping around on them, and ignoring how damn ugly they were. Then A few years back I decided to go with a full sized, non-raised side mat from Lloyds. No problems, but I do take time to kick the crap off the boots before I sit down.

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.3k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,739
    Total Members
    8,960
    Most Online
    chfkief
    Newest Member
    chfkief
    Joined
  • Who's Online   3 Members, 0 Anonymous, 1,543 Guests (See full list)

  • Latest Articles

  • Posts

    • Fred was in the fertilized egg business. He had several hundred young pullets, and ten roosters to fertilize the eggs He kept records, and any rooster not performing went into the soup pot and was replaced. This took a lot of time, so he bought some tiny bells and attached them to his roosters. Each bell had a different tone, so he could tell from a distance, which rooster was performing. Now, he could sit on the porch and fill out an efficiency report by just listening to the bells. Fred's favourite rooster, old Butch, was a very fine specimen, but this morning he noticed old Butch's bell hadn't rung at all! When he went to investigate, he saw the other roosters were busy chasing pullets, bells-a-ringing, but the pullets, hearing the roosters coming, would run for cover. To Fred's amazement, old Butch had his bell in his beak, so it couldn't ring. He'd sneak up on a pullet, do his job and walk on to the next one. Fred was so proud of old Butch, he entered him in the City Show and he became an overnight sensation among the judges. The result was the judges not only awarded old Butch the "No Bell Piece Prize," but they also awarded him the "Pulletsurprise" as well. Clearly old Butch was a politician in the making. Who else but a politician could figure out how to win two of the most coveted awards on our planet by being the best at sneaking up on the unsuspecting populace and screwing them when they weren't paying attention. Vote carefully in the next election, you can't always hear the bells.
    • Can someone confirm if the GM order workbench terminal is able to validate a custom build sequence:   1) Initialize the Allocation Base: Open a new vehicle build queue, select the 2026 Chevrolet Suburban 4WD, and pick the High Country (3LZ Preferred Equipment Group).   2) Select the Diesel Powertrain: Go directly to the engine configuration screen and choose RPO code LZ0 (3.0L Duramax Turbo-Diesel). Ensure it maps to the MHS 10-speed automatic transmission.   3) Deploy the Seating Swap: Navigate to the Interior Options screen and enter RPO code ATT to replace the standard captain's chairs with the power-release 60/40 bench seat. Because you are not trying to force a separate luxury or air-suspension bundle, the standard, premium D07 Fixed Floor Console remains active. The system will accept this change immediately without triggering a warning message.   3)Apply Heavy-Duty Hauling Capability: Input RPO code NHT (Max Trailering Package). The commercial terminal will automatically bundle the required trailering hardware and software modules to support the diesel engine's maximum towing capacity.   5) Layer the Premium Tech and Glass: Separately add code C3U (Panoramic Power Sunroof) and code UKL (Super Cruise) to the order screen.   6) Run the Final Validation: Click the "Validate Order" button at the bottom of the interface.
    • Spent the last hour or 2 googling and reading up on the spacer thing. I don't like the loss of thread contact on the slip on spacers, but it appears you can get "extended" lug nuts that reach into the hole of the wheel to get back the lost threads. Looks like the only true hubcentric slip on spacers are at least .375". I'd want as little as I could get away with and don't want to cause other clearance issues going any thicker. Bora seems to offer what appears to be a well made .375" spacer and extended lug nuts. I searched here and did find a couple threads recommending Bora. But not cheap. By the time I buy spacers and lugs, new TPMS sensors, then pay a tire shop to install the new sensors, I suspect I'm going to be in over $400. Thinking about running out and getting some washers to put behind the wheel to see if .375" is enough to clear calipers, turn lock to lock without rubbing, and to see if the wheels/tires look strange pushed out a little. This would just be to check fitment.
    • Roadmaster makes some quality parts; I have their sway bar. I considered the RAS, but I ended up bagging. I didn't know what kind of ride I'd get with RAS, and the bags have interior jounce bumpers, so I can run 0 pounds pressure. I figured I'd have the best of normal suspension ride with assist on-demand. But it seems you got pretty much the same in one item.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...