By Juan Pablo Fuentes
Hello guys, I recently bought a new 2018 Sierra Denali, loving the truck. All that enjoyment came to an end this morning when i was going into costco and hit the curb of the parking lot entrance at about 15 mph. The whole truck bounced off of the curb so it felt nasty. I got out and checked the damage and I shred a bit of the tire and scratched the rim. I am very paranoid as if it could have damaged anything internally, what do you guys think? Could I have damaged something else? Here is a picture of the visible damage. Edit: it is the front driver’s side wheel.
Executive Editor / Publisher, GM-Trucks.com
April 12th, 2019
A few months ago we started to notice something on our 2019 Silverado that no owner of a brand new vehicle wants to see. Rust. Specifically on our rear bumper, just around the plastic step. It wasn't huge and didn't spread very far from the edge... but we couldn't stop noticing it. There was no excuse for rust on a 8 month old vehicle with less than 10,000 miles. The photo above shows the minimal but noticeable rust patch. It was even happening on both sides and in the same place. The issue seemed odd.
Unfortunately, we've just been too busy to bring it by to our local dealership for them to look at. Lucky for us, our procrastination has paid off, because in the time between us first noticing the problem and getting off our lazy asses to drive to our dealer, GM has released a TSB about this very issue.
It appears that on most of the early trucks, production of the bumper was completed incorrectly. The steel assemblies should be bent into shape then chrome plated. But that didn't happen in a small part of the early bumpers. The supplier bent the area around the side step after the bumper was chromed. The new folds in the steel damaged the chrome, cracking it and making the truck susceptible to rusting.
What's the fix? If your bumper is rusting already, Chevy and GMC will replace it. If it has not yet started to rust, they will apply an automotive grade wax/sealant to prevent rust in the future.
If you're unsure if your 2019 has this issue we suggest doing the following:
1. Give your truck a bath for heavens sake!
2. Clean the rear bumper step area with a hose or pressure washer. Front and back! We find lots of dirt collects behind our step in the bumper assembly.
3. Inspect around the foot step area and behind the foot step area. We found rust in both areas!
4. If in doubt, wait for it to rust and kindly ask for a new rear bumper.
Our dealership, Banks Chevrolet in Concord, NH has been great getting our rust issue fixed. Our service adviser Justin has kept us in the loop during the repair and gave us a loaner Silverado LT while they have our truck. He even made sure any other outstanding service updates are also applied to our LTZ while it was in the shop. As it turned out, there were six open issues that needed addressed.
Here's the official Service Update you can print out and bring to your dealer when you take your Silverado or Sierra in for service.
My dad is looking to upgrade his 2011 Avalanche to something bigger, he wants a 2015-17 Sierra 2500 with a Duramax.
Can we get this in a quad cab or single cab configuration? Can't seem to find it on build & price for 2018 models on the GMC website. Crew cab won't fit in the garage.
Contributing Writer, GM-Trucks.com
GMC's new Sierra CarbonPro Editions arrive at dealers this summer, available on the Sierra Denali 1500 and the Sierra AT4 1500. GMC says that the first will arrive in June. Unlike a composite bedliner, GMC's purpose-built CarbonPro bed is the first of its kind for carbon fiber composite. GMC promises best-in-class dent, scratch and corrosion resistance. To help prove that statement, GMC has released a little bit of data on its testing. More importantly, images and video.
Tim Herrick, executive chief engineer, Full-Size Trucks, General Motors explained why truck buyers will want CrbonPro, saying, “The bed is the working end of a truck; it’s what brings buyers to the segment. Loaded with motorcycles, snowmobiles or dirt bikes, CarbonPro in the 2019 GMC Sierra is sure to impress with its strength, space and innovation.” Duncan Aldred, vice president, Global GMC, added, “CarbonPro is made of the same raw material found in seven-figure supercars and even aerospace applications. Coupled with offering the world’s first six-function MultiPro tailgate, the 2019 Sierra packs a one-two hauling punch for whatever the situation demands.”
The GMC CarbonPro bed has best-in-class cargo volume partly because its sidewalls can be pushed out farther. This is due to the outstanding formability of the carbon fiber composite GMC chose that allows molding deep and complex shapes with variable wall thicknesses. The CarbonPro bed is large enough to slide a 2-inch by 6-inch wooden divider into pockets in the bed wall for cargo organization and separation. GMC also points out that it is possible to vary the graining of the material. Some areas are deeply grained or traction and some are less grained so that cargo can slide in and out better.
The GMC CarbonPro bed has many design features, including:
- Spray-in bedliner not needed: Because carbon fiber composite is exceptionally durable, a spray-in bedliner is not necessary to help prevent damage and therefore will not be packaged on models with the CarbonPro bed. The composite material is rugged yet nonabrasive.
- Rear wheelhouse liners not needed: Because of CarbonPro’s increased dent resistance versus aluminum or steel, no wheelhouse liner is installed from the factory.
- Payload increase: Models equipped with the CarbonPro bed offer an increase in payload over a steel bed due to the mass savings of carbon fiber composite. Payload for these models is at least 59 pounds higher, depending on the configurations and equipment.
GMC laid out the type of testing that it conducts. Included are:
-Drop tests: Large and heavy loads were repeatedly dropped on the CarbonPro bed to replicate extreme use scenarios. Testing included dropping cinder blocks, 1800-pound loads of gravel and 450-pound water-filled steel drums from varying heights.
-Corrosion test: CarbonPro was subjected to corrosion testing but carbon fiber composite is naturally resistant to corrosion.
-Snowmobile test: A snowmobile with metal studs on the track was driven into the bed and accelerated at full throttle with a 250-pound rider on board with only minimal scratching evident on the bed.
-Extreme temperature testing: Validation work was performed in Yuma, Arizona, and Kapuskasing, Ontario, to help ensure CarbonPro holds up in unforgiving environments.
-Generator test: High heat exposure involved aiming the exhaust from a portable generator directly at the corner of the bed to ensure heat and vibration would not degrade the bed.
Who is interested in this new cargo bed? What do you like about it?
Recently Browsing 0 members
No registered users viewing this page.
Most OnlineNewest Member
Who's Online 101 Members, 1 Anonymous, 818 Guests (See full list)
- Capt Bob
- Michael Box
- C. Smith