Silvarado 1500 Zone 4.5" / 6.5" lift pictures

[MBSierra17]

Ah, that'll do it then. There's better clearance on those, I think. From what AgDoctor was saying, I believe 11.5 is about the limit for stamped steel UCA's on stock wheels. 

[Justin Nachazel]

Ah, that'll do it then. There's better clearance on those, I think. From what AgDoctor was saying, I believe 11.5 is about the limit for stamped steel UCA's on stock wheels. 

Here’s what I have

[AgDoctor]

Ah, that'll do it then. There's better clearance on those, I think. From what AgDoctor was saying, I believe 11.5 is about the limit for stamped steel UCA's on stock wheels. 

I have since learned that running a 22 will allow a 12" wide tire in most cases with stamped. Still 11.5 actual(some running 12 listed) width Max on stamped with factory 20's.

 

 

Sent via Morse code

 

[lapoolboy]

5 hours ago, MBSierra17 said:

Ah, that'll do it then. There's better clearance on those, I think. From what AgDoctor was saying, I believe 11.5 is about the limit for stamped steel UCA's on stock wheels. 

I run 12.5" wides on stock wheels with stamped UCAs.  No issues.

[MBSierra17]

12 minutes ago, lapoolboy said:

I run 12.5" wides on stock wheels with stamped UCAs.  No issues.

Didn't you start a thread like 3 weeks ago about your tires rubbing on the UCA? 

[lapoolboy]

13 minutes ago, MBSierra17 said:

Didn't you start a thread like 3 weeks ago about your tires rubbing on the UCA? 

Yep. And when I got the coilovers on and got the truck aligned, no more contact.  ?

[MBSierra17]

Oh awesome. Good to know! 

[Justin Nachazel]

Here’s for good reference

[Dersch]

On 9/21/2018 at 11:10 AM, Justin Nachazel said:

I couldn’t find this anywhere so I thought I’d officially let everyone know the 4.5” zone lift fits 35/12.50r20 Toyo open country AT 2 no rubbing or trimming on stock rims!

 

 

are these stock rims? also can you please measure your roof height clearance? I am considering doing the 4.5" zone with 33s and i HAVE to fit in a 7 foot 1" garage. 

[Justin Nachazel]

are these stock rims? also can you please measure your roof height clearance? I am considering doing the 4.5" zone with 33s and i HAVE to fit in a 7 foot 1" garage. 

Yes, in my post I said they are stock rims. My height with 35s is under 7ft with the 4.5” zone lift

[jimmyboy8301]

are these stock rims? also can you please measure your roof height clearance? I am considering doing the 4.5" zone with 33s and i HAVE to fit in a 7 foot 1" garage. 

I have the Zone 4.5” with bilstein 5100s set at 1.25” on 33s and i fit in a 7’ garage


Sent from my iPhone using Tapatalk

[geswek]

are these stock rims? also can you please measure your roof height clearance? I am considering doing the 4.5" zone with 33s and i HAVE to fit in a 7 foot 1" garage. 

I have a 6” lift with 35” tires and I park in my garage which has a 7’ opening.


Sent from my iPhone using Tapatalk

[Dersch]

On 2/2/2019 at 1:14 AM, Justin Nachazel said:

 

Yes, in my post I said they are stock rims. My height with 35s is under 7ft with the 4.5” zone lift

 

Hiw were you able to run stock rims? Thought you couldnt? Or do you have 20s?

[MBSierra17]

55 minutes ago, Dersch said:

Hiw were you able to run stock rims? Thought you couldnt? Or do you have 20s?

Need to be 20's.

 

Slightly better clearance on the cast UCAs too, vs stamped. Don't think those tires would clear stamped UCAs. 

Edited February 5, 2019 by MBSierra17

[Justin Nachazel]

Need to be 20's.
 
Slightly better clearance on the cast UCAs too, vs stamped. Don't think those tires would clear stamped UCAs. 

You are correct