2014 Silverado LTZ LED Switchback Resistors

[theweeknd]

 

I'm currently in the process of installing a resistor kit in my 2014 silverado 1500 LTZ for the turn signal led switchbacks, and there are 2 blue wires, 2 yellow wires, and 2 black wires going into the top signal bulbs. After looking at the wires i see that the one blue wire goes to the top sigal light and the other blue wire coming out goes to the bottom signal bulb and vice versa for the other wires, and i found out that the blue wire was the signal wire by testing it with a voltmeter, but the resistor i'm using (MORIMOTO HD LOAD RESISTORS) is saying to tap into the signal wire and onto a ground (a metal area on the truck itself) on the other side. I did just that and the resistor is still not working. Is there any help or information anyone can offer that would help me resolve this issue? Thanks.

 

[slj2008]

I'm currently in the process of installing a resistor kit in my 2014 silverado 1500 LTZ for the turn signal led switchbacks, and there are 2 blue wires, 2 yellow wires, and 2 black wires going into the top signal bulbs. After looking at the wires i see that the one blue wire goes to the top sigal light and the other blue wire coming out goes to the bottom signal bulb and vice versa for the other wires, and i found out that the blue wire was the signal wire by testing it with a voltmeter, but the resistor i'm using (MORIMOTO HD LOAD RESISTORS) is saying to tap into the signal wire and onto a ground (a metal area on the truck itself) on the other side. I did just that and the resistor is still not working. Is there any help or information anyone can offer that would help me resolve this issue? Thanks.

 

turn signal wire / ground wire . Don't forget the resistor's do get HOT .