Jump to content

Recommended Posts

Posted

Maybe.

IMO Yes.

The question is:

Do you want to replace it now or later.

Do you want to let the battery tell you when to replace it or do you want to replace it when it's convenient for you ?

Later being on a cold day, in the rain, at night.

 

When the truck doesn't start due to a dead battery and it doesn't bother you to deal with it then, then wait.

I replace batteries at 4 years of age and I'm on the cycle of doing this in the summer.

 

:)

 

Posted

About as long as I ever had on a original one. I always step up to a better Delco when I replace. Usually get at least 5 years out of them.  On my old 95 I could always tell when  it was getting weak by the way it cranked over. On this one it starts so easy it's hard to tell. I'm going to check with my buddy at the dealership and see what kind of deal he will give me on a new Delco. I might go ahead and change it. If not, this fall @ 5 years for sure.

Posted

Costco has the replacement battery for 115.00 and it comes with a 42 month replacement guarantee. They told me if you think it's weak at say 40 months, bring it in for a free replacement, no questions asked.

 

Posted

I ended up going with a Delco. Stepped up to the 94RPG (Professional Gold 800 Amp 42 month replacement). It listed for 199.41. I got it for 150.00 plus taxes (164.39 total). No Costco around here. O'reilly's wanted 222.00  plus tax for a 800 amp battery.  Autozone 222.00 plus tax for a 850 amp AGM. Both with 3 year warranty. I've had good luck with the Delcos. Glad I went ahead and swapped it out. 

  • 1 year later...
Posted

Like others said, the chain stores have instructions not to change out some batteries and this is one of them.  I changed out both of mine on a 2015  Duramax last month in about 45 minutes.  It is best to change both of them when 1 fails.  The other may not be far behind.  But GM Warranty will not change but the bad one, I prefer to do it right.  The module is just a box with about 5 big eye terminals to have to move out of the way along with 2 fender braces over the top of each battery.  

Posted

My battery bit the dust the other day also.  Went to back the truck out of the garage and it turned over a bit slowly so I started thinking replacement in the near future.  A bit later went to go somewhere and was completely dead.

 

Bought an Interstate from Costco with 42 month warranty and got it installed in about 30 minutes.  Hardest part was jockeying the old battery out once everything was out of the way.  Leave it to GM to make a simple job difficult.

Posted
On 8/9/2016 at 9:52 AM, White LTZ said:

A buddy of mine has the same truck as I do, 2014 Chevy crew LTZ. He is in need of a new battery. He's been to 4 different places (auto parts stores and repair shops) and they have all told him they won't replace the battery and he has to take it to the dealer. Has anyone else experienced this? They say it has to do with the cables and module on top of the battery.

typically after market / independent shops dont like touching batteries that have a fuse block on top of them. 

 

you can replace it yourself if you have some common sense. be careful if you use to much force on the fuse block it can break it and cause issues. 

 

im a tech for a gmc dealership. i dont even unhook the fuse block /cables. i take off the pos short cable, the neg cable , take out the support bar that runs asside the battery. pull the fuse cover off , release the tabs that holds it to the battery , move it out of the way, remove the battery hold down and the bolt holding the surge tank down and you have enough room to remove/replace battery. 

  • 4 weeks later...
Posted (edited)

My 2015 silverado has a bad battery. Personally thought is would last more than 4 years but after reading everyone else's post, looks like I got good life out of it. Replace it with an interstate AGM battery. Cant believe they cost north of $200 but hopefully this will last 5 plus years. Definitely more difficult than it should be but the basic DIy'er can tackle this task no problem. 

20190909_183050.jpg

Edited by Truston Gunter
  • Like 1
  • 1 year later...
Posted
On 8/12/2016 at 7:47 AM, Silverado-Hareek said:

I think the issue is you have to remove that structural cross member that attaches to the fender in order to be able to lift the battery out and they don't want to touch anything except for the battery itself. You know because out of all of that engine bay space, GM had to shove the battery in a tight corner like that probably to drive business to dealers which seems to be the logic behind most of the things they do. Your friend, as long has he has a good socket wrench set, should be able to install the battery himself just fine.

 Well  think what you wanna think but putting a heavy a$$ battery more towards the center of gravity and back from being in front of the front wheels will be ok with me anyway. I hardly doubt this move was to drive people into the dealer either. I mean who can’t replace their car battery other than the elderly people that can’t pick up the battery. There is basic things someone should be able to do to acquire a drivers license like change a tire, properly jumpstart a vehicle etc and if said person can do this they really should be able to change a dang battery without all the crying on the dang internet. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,902
    Total Members
    8,960
    Most Online
    whenindoubtuseahammer
    Newest Member
    whenindoubtuseahammer
    Joined
  • Who's Online   2 Members, 0 Anonymous, 387 Guests (See full list)


  • Latest Articles

  • Posts

    • Its no wonder you've gravitated to the oil types and brands you have in later years after trying certain brands and one being a specialty oil or at least very hard to come by up here and the other would have been a commonly found oil of the era and the vastly different outcomes as a result to using the vehicles in question the same distance for an OCI . It shows what marketing hype can do without actually having the product to back up the claims and that is no different now with the insane claims that are written on the side of a bottle of oil from some of the off the shelf oils.    What has surprised me and I was already finding this out before I bought my truck with the GDI engine, that this newer fancy technology that seemingly would suggest better fuel economy/emissions with this high pressure spray of fuel is not in reality kind at all to the engine or at least the oils life. Yet they insist on claiming long OCI with this technology just like they did with the port or similar type fuel injection systems when in reality its a step back in oil life to have a GDI system.    I think the mistake your making Grumpy is that your not sending your samples to Blackstone and getting the feel good glowing report that you can run it another 1000 or more miles and then send another sample where they say run it yet another 1000 miles and on and on it goes until your sending in something that looks a lot like road tar and then they may suggest you change your oil within the next 1000 miles 😆
    • I am guessing that engines of that design back then had a better ability to be abused and survive longer than a new design engine with the long timing chain and the overhead cams and phasers etc. But I would never guess that an engine could go that far and not fail spectacularly or at least die a slow death. 
    • In the 80's 90's I'd run Honda's 7,500 miles between changes using Red Line HP 5W20 and do it for hundreds of thousands of miles with issues. Back in the day it was an SAE 20 with the HTHS of a SAE 30 and SN add load. It was also very polar. Oxidation VOA was over 120. Besides those motors were SPFI and lean burn tech. I could have likely run it longer but never did.    We had a Toyota bought new I ran on Pennzoil's latest and greatest synthetic of the day with "Penthane". A made up word for a very low dose of PAO. Tried 7,500 mile OCI's in that Group III/VI chemistry and the rings tapped out at 90K. Rocker box wasn't as bad as the one Punch put up but it wasn't good either. Also a SPFI motor.    I'm around 3,750 across the board on these GDI monsters and the oil it tapped out by then usually on TBN/TAN crossover and color. Red Line HP Euro.    The AMSOIL SS brochures tell you to follow the OEM values for the service class but that it can be run up to 25K if monitored. I can't imagine what motor could go that distance and not tap out. I've never owned one.    Yes, I know. Lot's of people do. I'm just not going to be one of them. 
    • I knew a guy in the early 80's that bought a new Monte Carlo and ran it a 100,000 miles without ever changing the filter or the oil. Just kept adding. It looked like that inside.     
    • Good evening. I was lucky enough to get passed down to me a 2007 GMC LBZ that was my great uncle's. While the underside and rockers are more or less gone I feel like with time I can restore it to working order since it only has 110,000 miles and he put nearly every option he could get without getting the new body style since he did not trust DEF. So far I have done everything I can think of but when I put the key into the ignition nothing happens. I put 2 brand new batteries in it. Cleaned the terminals. Check all the fuses and relays and they all pass with my multimeter. I know I'm missing something that I just cant think of. The only odd thing is the OBD2 port works which makes me think its not the mega fuse. Any advice would be greatly appreciated. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...