Jump to content

Recommended Posts

Posted (edited)

Are you sure it's not back of the console in a Yukon / Yukon Denali?

 

IIRC, 'Tri-zone' climate control is standard on them.

Edited by redwngr
Posted

Are you sure it's not back of the console in a Yukon / Yukon Denali?

 

IIRC, 'Tri-zone' climate control is standard on them.

 

It's not, check this photo

yukon-6.jpg?quality=70&strip=all&w=800&h

Posted

my guess is get a Tahoe headliner, remove the ductwork, glue it to Silverado headliner and work on the ducts from the headliner to the dash....might be harder than I thought

  • Like 1
Posted

Look at that tiny radio display ;) just kidding... or not

  • Like 1
  • 1 month later...
Posted

Rear vents and rear heated seats? Someone should be taking notes. Better yet, we should have that already...

  • Like 1
Posted

It is mentioned elsewhere in this forum but worth repeating. There are vents under the front seats directing warm/cool air to the back. It is not a blow the air in your face system but it is effective in my opinion. Heated rear seats is one of those options that would be useful for a small minority of truck owners.

Posted (edited)

To each their own. If you're sitting in the back seat for some reason, I'm sure you will take solis that the vents are under the seat, and blowing on your feet, instead of on your face, neck, or body. Me, I want it where it will do me the most good...

Edited by 6.2Midnight
Posted

Not for nothing but floor vents and dash/console vents serve two completely different purposes. Floor vents are for heat and dash/console vents are for cooling. Max cooling/AC will not utilize the floor vents in the back seat.

 

Sent from my Nexus 6 using Tapatalk

Posted

To each their own. If you're sitting in the back seat for some reason, I'm sure you will take solis that the vents are under the seat, and blowing on your feet, instead of on your face, neck, or body. Me, I want it where it will do me the most good...

I appreciate that there are people who like vent air blowing directly at them. I don't like HVAC vents blowing at me in my home or vehicle. I have no difficulty maintaining a comfortable temperature throughout the cab with the existing layout of the vents. I regularly transport passengers of all ages and only receive compliments as to their comfort. There is no argument that many people like roof top or mid height vents in the back. However, the current system is designed to heat and cool the entire cab and in my opinion works well.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Length/amount of data capture will be important to consider, sifting through 5 minutes of a data log can be enormous when it is stored in milliseconds. Being able to find the 'event' let alone decipher it.   Presumably the driver would notice something and hit a button to capture the 'window' of data. That window has to be large enough for the operator to recognize the event and react accordingly.    The data has to be able to be retrieved easily.   The data has to be able to be understood. Which is the biggest challenge, dealer techs won't even know what most of it is and would likely not even look at it if an owner brought it to them. Meaning the owner, the least educated/qualified, trying to understand it.    How will the data be presented? Could specific PIDs be selected and a timelapse graph be watched? How will a specific value be noted as abnormal? Additionally, a good data logger would be able to 'learn' normal values for a specific vehicle and flag abnormalities automatically. It could in theory watch parameters degrade over time and suggest maintenance as needed. (If the MAF reading begins tapering off for a given set of other readings - MAP, throttle position, Ambient, etc.. a flag to check air filter.) With the amount of data available, a device (really the vehicle rather than an additional accessory) should be able to do more than issue a DTC. It should be able to run the full diagnostic suite automatically and present a solution rather than a code. (It's not the 90's anymore). The technology is available for the vehicle to not just say "P0087", it should know low fuel pressure, check other PIDs to narrow down the problem itself, and determine if it is a lift pump, high pressure pump, regulator, leak in the fuel line, clogged filter, etc. Even if it can't narrow it down, it should be able to guide the user to the likely problems.   This would be a major problem for dealer service departments, which are the manufacturers customers it is in their collective best interest to NOT have this available to the consumer.   Further, if the owner is going to be the primary consumer of the data, it's got to be at a consumer price point vs. dealer only specialty tool price.   This group is more 'involved' in their vehicle than general public/consumer and will have knowledge, experience, needs and desires that are quite different from the market at large.   
    • I put the prof up. If you read what I posted. You can see that housing, cars and income are in line with the era we were talking about. It’s harder in some places easier in others. Let’s agree to disagree and put this back on track, OK? We both are pretty stubborn and hard headed. But I bring receipts. If you wish I will not respond to you in the future. 
    • Lets see if I can sum up two pages of nothing useful.    You want to refute your own governments data of the "Purchasing Power" Index FOR THE ENTIRE USA and its territories replacing it with the experience of a single family and its business and label that reality?  Then pound on that for a week hoping it will find traction?    Stan, I've told you several times. I don't do irrational. There are more people in the USA than your family.    I'm pretty sure this tread is so blown up. I'll give you a few days or months if need be to post yourself silent then I'll see if I can find enough parts of the train to reassemble it. 
    • Facebook groups hate VSE, poor customer service; their responses to criticisms are pretty poor for a reputable company. I'm not a customer, haven't bought anything from them, but how they handle themselves on social media is a definite "No" for me. 
    • $10,000 for a transmission?   Pretty sure I could buy all the parts, tools, and education to rebuild it myself for a quarter of that amount.   or swap it out with a new one...
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...