Jump to content

Collapsed lifter AFM issue

ndestounis
 Share

Recommended Posts

David Schneider Enthusiast

David Schneider

Posted
Posted

I dunno. It was driving like complete garbage before i put the air filter on.  That's the reason iput it on. there is absolutely no reason for that truck to be dropping in cylinders when you're driving in City traffic. I don't care what anybody says it's not good for it and it's not good for gas mileage at all. There something not right. And i can't handle it anymore. I hate it!  Wish i did my research bout AFM dod. Before i bought this truck.  We should have to buy a range or a disabler because Chevy wants to try some new energy-saving bullshit

  • Replies 92
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Mozzer
Mozzer

And before you visit the dealer, try driving the same trip in manual mode, M5, as mentioned above to help diagnose if is AFM you are feeling or not . Sent from my Moto Z2 Play using Tapatalk

newdude
newdude

Have your dealer read into this document 15-06-01-002E.  

jhbrennan
jhbrennan

Make a copy of the bulletin as provided in the previous posts and show it to the service manager. Ask why he isn't doing what GM states should be done. Escalate issue to dealership General Manager a

Posted Images

swathdiver Senior Enthusiast

swathdiver

Posted
Posted (edited)

The whole point of AFM is to increase fuel efficiency.  I don't like it either but understand why, government regulations forced them into this option.  That means, the knuckleheads we send to Washington eventually caused this.  It's our fault for letting it happen.

 

Now, back to your truck.  Newdude's advice is spot on but I'll add something else that AFM looks for, vacuum.  It looks to me from reading your posts that AFM is staying on too long, it's not switching off and re-engaging the four cylinders fast enough.  This is a problem with the solenoids that stop oil flow to the injectors. 

 

If I were you, I'd take it to a different dealer and if that didn't get the problem resolved, I'd fix it myself.  I would buy the MDI2 and GDS2 software to see what the computers are seeing and then fix whatever was wrong.  There's nobody more vested in the health of your truck than the one paying for it, you!

Edited by swathdiver
grammar
David Schneider Enthusiast

David Schneider

Posted
Posted

Thank you for your advice man I appreciate it could alot. Yeah there so much that goes in to the system. That beyond me and my skill sets. But ain't no dummy either. But I will look into what you suggested and hopefully can figure this thing out 

  • Like 1
Mozzer Enthusiast

Mozzer

Posted
Posted

And before you visit the dealer, try driving the same trip in manual mode, M5, as mentioned above to help diagnose if is AFM you are feeling or not .

Sent from my Moto Z2 Play using Tapatalk

  • Like 2
  • 3 months later...
bowtiemark Enthusiast

bowtiemark

Posted
Posted

had this weird noise to was thinking suspension or tranny issues took to the dealer today and AFM lifters colllapsed, nice guy i talk to seem very helpful but wann know how many lifters come in all? want to see if a dealer can replace a couple more than just the two that went out... and any ways to prevent this down the road? 

JBR Enthusiast

JBR

Posted
Posted

A few things. 1. GM repair requires the entire bank of lifters to be replaced (which is what they did to mine). 2. From my research, a catch can helps with things apparently on the direct injection design. My lifters are now going out a second time, and they were just replaced 10K miles ago. It’s unfortunate that the application for EPA requirements are these ridiculous designs. I’m selling my ‘15 next month and already bought it’s replacement, a 1998 Chevy 2500. The funny thing is, the 1998 gets better MPG than the new EPA requirements of the my 2015.

bowtiemark Enthusiast

bowtiemark

Posted
Posted
19 minutes ago, JBR said:

A few things. 1. GM repair requires the entire bank of lifters to be replaced (which is what they did to mine). 2. From my research, a catch can helps with things apparently on the direct injection design. My lifters are now going out a second time, and they were just replaced 10K miles ago. It’s unfortunate that the application for EPA requirements are these ridiculous designs. I’m selling my ‘15 next month and already bought it’s replacement, a 1998 Chevy 2500. The funny thing is, the 1998 gets better MPG than the new EPA requirements of the my 2015.

what after 10k?? that’s crazy i ask the service tech how it happens and he just told me lack of maintenance but i baby my truck... and thank for info going to tell them to replace those bank of lifters.. it’s a shame man had a 98 1500 during high school and man i beat that thing up and it still never gave me problems till around 170k. miss that thing 

bowtiemark Enthusiast

bowtiemark

Posted
Posted
43 minutes ago, JBR said:

A few things. 1. GM repair requires the entire bank of lifters to be replaced (which is what they did to mine). 2. From my research, a catch can helps with things apparently on the direct injection design. My lifters are now going out a second time, and they were just replaced 10K miles ago. It’s unfortunate that the application for EPA requirements are these ridiculous designs. I’m selling my ‘15 next month and already bought it’s replacement, a 1998 Chevy 2500. The funny thing is, the 1998 gets better MPG than the new EPA requirements of the my 2015.

did y’all have the same noise like some thumping sound? me and my wife call it the chevy helicopter, that sound is hideous  :sick:

  • 2 weeks later...
Melks Enthusiast

Melks

Posted
Posted

I noticed a ticking sound starting on my 2015 5.3L Sierra so I brought it in to the dealer. Turns out it needs lifters and a cam at 69,000km. Parts will take 5-7 days to come in they say and it is being covered under warranty, but I am worried this will happen again in the near future. My warranty will run out in 16 months time. Just seems odd for this kind of replacement at only 69,000km - something doesn't seem right.

bowtiemark Enthusiast

bowtiemark

Posted
Posted
On 7/10/2019 at 11:11 AM, Melks said:

I noticed a ticking sound starting on my 2015 5.3L Sierra so I brought it in to the dealer. Turns out it needs lifters and a cam at 69,000km. Parts will take 5-7 days to come in they say and it is being covered under warranty, but I am worried this will happen again in the near future. My warranty will run out in 16 months time. Just seems odd for this kind of replacement at only 69,000km - something doesn't seem right.

happen to my 14 silverado 5.3 as well but around 65k making an  horrible knocking noise when on v4 mode, took to dealer said it was lifter collapsed, took the same amount of days for parts, under warranty and got a free loaner ( 19 high country literally made me want to get that truck lol..) but repair took about 4 days due to the fact they had to repair both sides of lifter they now telling me i should be good for another 100k. i had the same quotation “how is this happening so early in the truck?” they reply “ premature aging, somewhat a common problem on these trucks” like what??? the truck feels so much better now and the shift to v4 doesn’t feel that bad, going to do an oil change too just so i can have a better piece of mind knowing everything is fine there... i wouldn’t be that much worried... i’m guessing just one of the few that got unluckily with the bad lifters but i will be getting extended warranty and honestly if this problem happen right now who knows what can happen later on that’s why better to be safe than sorry! 

Melks Enthusiast

Melks

Posted
Posted
21 hours ago, bowtiemark said:

happen to my 14 silverado 5.3 as well but around 65k making an  horrible knocking noise when on v4 mode, took to dealer said it was lifter collapsed, took the same amount of days for parts, under warranty and got a free loaner ( 19 high country literally made me want to get that truck lol..) but repair took about 4 days due to the fact they had to repair both sides of lifter they now telling me i should be good for another 100k. i had the same quotation “how is this happening so early in the truck?” they reply “ premature aging, somewhat a common problem on these trucks” like what??? the truck feels so much better now and the shift to v4 doesn’t feel that bad, going to do an oil change too just so i can have a better piece of mind knowing everything is fine there... i wouldn’t be that much worried... i’m guessing just one of the few that got unluckily with the bad lifters but i will be getting extended warranty and honestly if this problem happen right now who knows what can happen later on that’s why better to be safe than sorry! 

Thanks for sharing. I think I will speak with service advisor when the truck is ready to be picked up and see if there is anything I can do about extended warranty. Worst case scenario - if this issue arises again when I am out of warranty I will have to debate trading in for a new truck and 5 year/160,000km warranty. Can't imagine what the cost would be for this type of repair if I had to pay out of pocket in the future...

bowtiemark Enthusiast

bowtiemark

Posted
Posted

From what i been reading from this site, is that the repairs can be costly.... if anything just the tranny and engine warranty shouldn’t be that much, although the stealership may try to give you a high price. but if they are replacing lifters you should be fine for a long time, luck to you my brother! 

Trnr1995 Enthusiast

Trnr1995

Posted
Posted

Went to Tennessee, from Illinois, last Friday with my 2015 Silverado High Country 6.2 and 2 waverunners. Around 60,000 miles. Returned yesterday with a rental car that I paid for. Truck had issues and took it to the dealer. Collapsed lifter. Said it might be a couple of weeks. Waiting to go back down to pick up truck and waverunners. They said the have done several of these. Not a happy camper. Been a GM guy for 30 years.

Looks like me and GM have broken up.

Colossus Senior Enthusiast

Colossus

Posted
Posted (edited)

Welcome to loyalty in the 21st century.  It means nothing.  Sorry you were let down. 

Edited by Colossus
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • btm
      Sunroof Drain Hole Entry & Exit Location (w/ Pictures)

      By btm · Posted

      2015 Sierra 1500 here. Leaks from the sunroof to front driver side and soaks carpet. How do I fix this? Thanks!
    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      I will be doing that for sure, but I need to solve who has/ where I can find a bidirectional scan tool that will support OBD 1.5. I'm kicking myself because I ebay'ed a Snap On MT2500 that I didn't think I'd ever need anymore. D'oh!! I'd rather not buy another, so I'll contact a few local shops to see if they have one and how much they'd want to do the procedure. I'd rather have the ability to do it myself... I wish there was a modern tool that could do it all, but I'd have no idea what to buy.   The theory with the pulled timing is that it mimics a rich condition. The delayed spark causes incomplete burn and the O2 sensor picks up low oxygen levels. That's interpreted as a rich condition so the PCM pulls fuel and that shows up in the deeply negative fuel trims.
    • Chuck FB
      Joke Thread

      By Chuck FB · Posted

      An ultra wealthy man had the most beautiful daughter. But, there was a problem. Everything she touched would melt in her hands. No matter what, Metal, Wood, Stone. Anything she touched would melt. She could not feed herself. Because of this, men were afraid of her. Nobody would dare marry her. Her father was despaired. What could he do to help his daughter? He consulted doctors, scientists and anybody who could solve this problem. Finally one of them said, "If your daughter touches one thing that does not melt in her hands, she will be cured." He was overjoyed and came up with a plan. The next day, he held a competition. Any man who could bring his daughter an object that would not melt in her hands would be given billions of dollars to marry her. Three extremely intelligent and handsome young men took up the challenge. The first brought a very heavy steel rod, But alas, when the she touched it, it completely melted in a matter of seconds. He sadly went away. The second brought a beautiful diamond, knowing diamonds were one of the hardest substance in the world and would not melt. But alas, once she held it in her hand, it melted. He too was sent away disappointed. So now, there was one left He was very nervous & sweating. He approached the daughter & said, “put your hand in my pants pocket and feel what is in there." She did exactly what he asked. She felt something very hard. She held it in her hand, squeezing it as hard as she could. It did not melt & remained extremely hard. Her father was overjoyed. Everybody was overjoyed. She was finally cured. Nothing never, ever melted in her hand again. They married and they both lived happily ever after, raising a wonderful family. Question: What was in the the groom’s pants pocket??? Answer below ↓ M&Ms of course! They melt in your mouth, not in your hand. What on earth were you thinking?
    • asilverblazer
      Wow I'm in a pickle. (Broke down truck) and a story.

      By asilverblazer · Posted

      There's a bunch of tea leaves that you've read, but in any case the delayed timing is unusual. Not sure how that relates to the rich at idle vs. 'normal' while driving.   If you're in this deep, might be worth investigating, and re-learning the sensor. What have you got to lose? Plus, it properly fixes the timing cover leak.
    • asilverblazer
      Wow I'm in a pickle. (Broke down truck) and a story.

      By asilverblazer · Posted

      The only problem I have seen this cause is longer crank times. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...