Jump to content

Recommended Posts

Posted

I just purchased a 2018 Silverado crew cab z71 with the 5.3 about a month ago and I have put about 1500 miles on it. This weekend I noticed when I was driving to and home from the desert that my temp would go a little over 210 while on a hill, and as soon as I would get to a less aggressive grade the temp would drop back down to 210 within seconds. The highest it has gotten was about 220, and I'm just wondering if this really is normal. I had a 2002 Silverado and it never went past 210, even when it was over 100 degrees out. 

Posted
I just purchased a 2018 Silverado crew cab z71 with the 5.3 about a month ago and I have put about 1500 miles on it. This weekend I noticed when I was driving to and home from the desert that my temp would go a little over 210 while on a hill, and as soon as I would get to a less aggressive grade the temp would drop back down to 210 within seconds. The highest it has gotten was about 220, and I'm just wondering if this really is normal. I had a 2002 Silverado and it never went past 210, even when it was over 100 degrees out. 
Welcome to having a real coolant temp gauge. Perfectly normal.

Sent from my SM-N910V using Tapatalk

Posted

Factory thermostat trigger temperature is 207 F with a +/-3 error. Don't kid yourself the oil temp is a good deal hotter. :lol:

Posted

Im a little surprised it would move at all. I have never seen mine moved even towing. I have a 1500 and a 2500 never seen the temp budge even hills or flat. Not sure what to tell you. 

Posted

My 2017 6.2 Max tow runs hotter towing then did my 2015 5.3 by a noticble margin but not alarming as it cools when the fans kick in. 

Posted
6 hours ago, Grumpy Bear said:

Factory thermostat trigger temperature is 207 F with a +/-3 error. Don't kid yourself the oil temp is a good deal hotter. :lol:

On my Sierra my oil temps are generally the same or lower then the engine coolant temps. I have a ScanGauge II monitoring engine oil temps. Normal highway driving (no towing) I see around 200F during the summer (190's winter). Towing 3000 lb boat in 5th gear I might see 215F. Everywhere I drive is generally flat so towing up grades would probably be a little higher. I believe all the EcoTec3 V8 engines have oil coolers (not sure about the V6).

Posted

I never notice mine moving even when towing up hills in the summer with the a/c on. Trans temp is another story however.

Oil coolers are standard with both the basic and max tow packages.


Sent from my iPhone using Tapatalk

  • Like 1
  • 4 years later...
Posted (edited)

It’s fine. My car’s normal ECT is 220-230*F. Boiling point is ~260*F on your engine. No worries. 
 

There’s much less air on “the pass” than at sea level, which means less heat transfer. 

Edited by 16LT4
  • Like 1
Posted
1 hour ago, Brandon Ure said:

My 2016 Sierra was creeping up on 230 going over the pass. Came down as soon as the hill was breached, but makes me sweat a little. Any suggestions?

 

High heat makes a motor more thermally efficient but it doesn't make it more reliable. Heat is the enemy of reliability. For decades the design of cooling system utilized 180 F thermostats and radiators large enough to maintain that temperature. Then for some time it was 192 F and now..............

 

Question: What effect does heat have on oils viscosity? What effect does viscosity have on mechanical reliability? If you know the answers to those two the you have to ask yourself what it means for a motor whose specifications include both a 207 F thermostat AND 0W20 oils? 🤔

 

Normal? To the design it is. To longevity it isn't. You get to choose. How happy for you, right? 

 

It may seem I didn't answer your question but within this reply is every piece if information you asked for and more. 

 

 

 

 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.6k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,993
    Total Members
    8,960
    Most Online
    President Roberto
    Newest Member
    President Roberto
    Joined
  • Who's Online   1 Member, 0 Anonymous, 252 Guests (See full list)

  • Latest Articles

  • Posts

    • I don't wanna do major surgery/upgrades, behind-the-dash work, add amps, change radio etc. on my '26 std cab WT. On the WT, it has the base 7" IOR infotainment setup, and only two speakers (doors). Since I listen to classical, looked around for speakers that do well and dug thru reviews. Two-way speakers were found to be better than 3-way. So I've ordered a pair of  Infinity Reference REF-9632IX 2 way speakers.  [These may  or may not have been discontinued / succeeded by the 3-way ...9633 ones.]    These speakers are lauded for 3 ohm and 94db sensitivity spec so they'll work well for ordinary base car radios without amps and offer better performance (quality,  strength) than  default base paper-cone speakers. They'll be installed in a few days and I'll let y'all know what I think. Bill W San Jose      
    • Thanks!   Changed out the rear shocks today to Bilstein 5100s.  So far feel much better. The stock Rancho were wore out.  Lots of heavy hauling (2 moves, home renovations, etc).  Next up is new BFG tires Monday.  Cant wait the current tires have little to no wet traction and are super loud (hum)    
    • Ok, I got the all the codes. What do you all think would be a place to start?
    • How about I just point to the factory pans stand pipe little drain plug and claim its a pan with a real drain plug !. I just couldn't swallow the fact that a Dorman pan which at this point is probably the only pan out there that fits the gas version truck cost that much up here in Canada so I decided initially anyway to skip it and see what I thought of pulling the pan method and down the road if I felt inclined enough then I would either install a drain plug kit in the factory pan if there is enough room for it, or have a bung welded onto it, or put an aftermarket pan on. The thing is if the pan is not pulled then the magnets in the pan can't be inspected and cleaned or if wanting to change out the filter. However of course it certainly would make the job easier to be able to drop the oil first before having to handle the pan if dropping the pan that go around was the goal.    I knew a guy locally that was doing custom field spraying years ago with a pickup pulling a ground driven sprayer, I believe it was a GM pickup with an automatic trans. He had a drain plug in his pan and would drop the oil out of it once a week and top it back up through the dipstick tube to keep refreshing a portion of the oil often and that made the transmission last far longer than had he done nothing. Soft fields pulling 500 gallons of water at the start of each mixed up sprayer tank batch and in low range sucking along. I imagine he got some tips from other custom sprayer outfits doing the same thing at the time and learning from their blown up tranny mistakes. Transmissions then had no lock up converter so would cook the crap out of the fluid slipping that much and it would not have been synthetic fluid either. 
    • 3.39 Kroger’s in Montgomery Texas. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...