Jump to content

Recommended Posts

Posted (edited)

JUST AN OBSERVATION.............

 

SO, I have found that, occasionally, my driver side mirror will not unfold, when I unlock my truck, but the passenger side will.  Not sure why this happens at least once a week.  After several attempts to "unlock/unfold," I have discovered that after the first attempt to unfold, it is better fold the mirrors back in, and unfold them again.  I'm not sure if some lug-nut, out there, keeps coming by my truck, once a week, and tries to manually unfold my mirror. 

Edited by Ravenkeeper
Font size
Posted

My passenger side tow mirror occasionally flakes out and either doesn't fold when commanded to, or only folds partially. I've never had an issue with it unfolding though. Mine seems to do it only when it's cold outside from my observations. Thought about bringing it to the attention of my dealer next time through and hope it's covered under the extended warranty.

Posted

My passenger side does the same...Sometimes it doesn't fold out...I've taken it to the dealer, and since it's happening at random, they could not produce the issue.

  • Like 1
Posted
7 minutes ago, Jetmek said:

My passenger side tow mirror occasionally flakes out and either doesn't fold when commanded to, or only folds partially. I've never had an issue with it unfolding though. Mine seems to do it only when it's cold outside from my observations. Thought about bringing it to the attention of my dealer next time through and hope it's covered under the extended warranty.

Not quite the same, but mine's been doing it year-round, so temperature is not the issue.  It's been only doing it in my driveway, that's why I'm thinking that someone is messing with it.

Posted
3 minutes ago, KA0S said:

My passenger side does the same...Sometimes it doesn't fold out...I've taken it to the dealer, and since it's happening at random, they could not produce the issue.

Next time it does it, fold them and then unfold them.  You may have someone messing with it/them, like mine.

Posted (edited)
14 minutes ago, Ravenkeeper said:

Not quite the same, but mine's been doing it year-round, so temperature is not the issue.  It's been only doing it in my driveway, that's why I'm thinking that someone is messing with it.

No, not quite the same and the temperature definitely isn't the issue, though I'm sure it gets cool in Cali. We've had a rather ridiculous swing in the thermometer here as of late. 50's one day, then 3 days later wind chills of 5 to 10 below. Do you know of someone who would do it just to be funny? Touching another mans truck without permission should be punishable by law.

Edited by Jetmek
Posted
19 minutes ago, Jetmek said:

No, not quite the same and the temperature definitely isn't the issue, though I'm sure it gets cool in Cali. We've had a rather ridiculous swing in the thermometer here as of late. 50's one day, then 3 days later wind chills of 5 to 10 below. Do you know of someone who would do it just to be funny? Touching another mans truck without permission should be punishable by law.

YIKES!!!  Last week, I was using the hell out of my heated sweater (mid-30s to mid-40s), with wearing a sweatshirt on my way to work (mid-60s).  This week, I haven't used my heated sweater, yet.  70+ coming into work, and mid to upper 40s on the way home.  Although, Thursday, LAST WEEK, we had high winds and it was in the 30s, when we went home.  Had my heated sweater on high, I was nice and toasty, until I cleared the hangar door.  Wind blew ALL of the heat out of my sweater, even with my gortex jacket on, over top of my sweater.

 

Touching another man's truck without permission should be punishable by death. 

Posted

Had the same issues with passenger side not folding. It was an intermittent issue. Finally it quit all together after about a year of sometimes working sometimes not. Dealer replaced the entire mirror advising it was a bad mirror motor.

Posted
11 hours ago, Jetmek said:

My passenger side tow mirror occasionally flakes out and either doesn't fold when commanded to, or only folds partially. I've never had an issue with it unfolding though. Mine seems to do it only when it's cold outside from my observations. Thought about bringing it to the attention of my dealer next time through and hope it's covered under the extended warranty.

My passenger side tow mirror does this as well - when I pull out of my heated garage drive to work in the morning park hit the fold it either doesn’t go or only goes partial. I have to cycle it a time or two for it to fold all the way in. We have similar temps in the frequently below 0 and then in the low single digits or teens.

Posted

OP - you can get an adequate quality infrared game camera for about $50 from Academy/Dicks/etc.   SD card download to your phone/computer.  Your question will be answered.  

 

 

Posted

Just went to the dealer with this same issue(passenger side mirror randomly won't unfold). they updated the seat memory software ,but could not replicate the problem. I don't know if it worked yet...

Posted
On 2/3/2018 at 7:10 AM, Boardmember said:

OP - you can get an adequate quality infrared game camera for about $50 from Academy/Dicks/etc.   SD card download to your phone/computer.  Your question will be answered.  

 

 

Been thinking about that, dash cam (motion sensitive), or camera system on my driveway/house.  I have a "driveway doorbell" from Harbor Freight, in my garage, been thinking about putting that up, too.

  • 3 months later...
Posted

I'll bet you the little plastic spur gear inside the drive unit is broken in half or missing teeth.  Ive seen this happen alot and depending on how the gear is oriented, sometimes it will grab the mating gear and sometimes it will just let the motor spin.

 

The real problem is that plastic gear itself, it should be metal.

 

You can buy the upgraded metal components here, its the 1st item.  If you have power folding mirrors, this is a smart upgrade because even if you dont power fold them much, all it takes is 1 manual fold cycle from the guy at the car wash and that cheap plastic gear usually goes snap.  Once that plastic gear in there breaks, the mirror main spring doesnt get compressed and it lets the whole mirror wobble and vibrate as you are going down the road.

 

http://www.gruvenparts.com/shop-by-car/gm-truck

Posted
3 hours ago, jatkinson8755 said:

I'll bet you the little plastic spur gear inside the drive unit is broken in half or missing teeth.  Ive seen this happen alot and depending on how the gear is oriented, sometimes it will grab the mating gear and sometimes it will just let the motor spin.

 

The real problem is that plastic gear itself, it should be metal.

 

You can buy the upgraded metal components here, its the 1st item.  If you have power folding mirrors, this is a smart upgrade because even if you dont power fold them much, all it takes is 1 manual fold cycle from the guy at the car wash and that cheap plastic gear usually goes snap.  Once that plastic gear in there breaks, the mirror main spring doesnt get compressed and it lets the whole mirror wobble and vibrate as you are going down the road.

 

http://www.gruvenparts.com/shop-by-car/gm-truck

this is good to know.

thanks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • Hello hello looking forward to expanding my knowledge of the 2026 2500 HD that I just bought.   Truck has 3500 miles on it four-wheel-drive crew cab and I’m about to put a 6 1/2 inch BDS lift on it 18 x 10 -25 offset with 37’s   Already have the wheels and tires just waiting on the lift install in about three weeks   Question what surprises am I not gonna be happy with?  I’m not new to lifted trucks so I know that acceleration towing gas mileage all that is affected..   Question is those of you that have this truck this powertrain with a 10 speed Allison and have done the mods that I’m doing,,, how bad is it? Is that Allison constantly gonna be hunting for the right gear to go into? And what about towing, acceleration, fuel consumption as mentioned?    Lastly how come I can’t find any ring pinion gear set up for these axles and when could I expect to see them?   I apologize if there’s any typos I’m doing speech to text on my iPhone.    
    • I've got a 2013 2500 6.0L Flexfuel. Drove the truck earlier today with no issues. Went to run an errand tonight and noticed key fob wouldn't work. Figured battery was dead, so replaced fob batter. Still wasn't working. Grabbed my other set of keys with the other fob and that one wasn't working either. So I manually unlock truck and insert key. Interior lights come on, dashboard lights up, turn key and truck starts. Turn truck off, like a moron, and try starting again. This time no crank, no click, no nothing. Lights still come on and dash lights up, but now I'm getting a service 4wheel drive, service tire monitor, etc. Check voltage on battery and Im showing 12.2v. Throw my battery charger on it and give it 15 mins and try starting again. But still no crank no start. Decide maybe its a bad battery, run to autozone grab a new one and put it in. Same issue. Disconnect battery and let it sit for 15 mins. Try again and still nothing. I had managed to roll the windows down earlier as its a humid night, but now I can't get them to roll up. Power locks are also not working now. Then randomly I try the key again, and it fires right up. Immediately I roll up the windows as we have nothing but rain forecast this week. I shut it back off wait 30 seconds and start up again. Worked a 2nd time. So turn it off, start putting things back together. Try one more time, and back to no crank no start. And now the car alarm starts going off. Had to disconnect battery and leave it that way for the night as I don't think my neighbors would appreciate my alarm going off again tonight. Any thoughts or help would be appreciated. 
    • No one will care for you like you care for you. Do what you can for as long as you can. IMHO of course. 
    • How about them NICKS!!! 
    • Hi there.  Long time lurker, first post.    i have read the previous posts regarding the water ingress problem with this emblem.  I bought my 1500 SLT the  summer of 2025 new and after reading the MANY problems with these emblems failing I decided to install one anyways.  As per a YouTube video, I sealed ( or tried to) this sign with silicone sealant around the outer perimeter joint and the holes that were already somewhat sealed on the rear plate of the emblem.  And installed the connector assembly using dielectric grease on the connectors. The installation looked great and worked well for about 4 months……then FAILURE.  Grrrrrr…… I live in the great white north and wash my truck weekly in an automatic car wash  to keep the salt off.  Let me tell you that removing the old, failed emblem is a whole different animal than removing the OEM individual letters without removing the grill assembly. Mainly because the illuminated logo is built differently than the original letters which  you can remove the red surface lettering with a knife or some kind of blade which gives access to the tabs which hold the logo onto the grill. So I had to essentially destroyed the old emblem to remove it. Doing so killed my chance of doing somekind of autopsy on the failed , old logo.  But there was plenty of water inside when I ripped it apart.  Prior to installing the new assembly I tried it with the old harness and it works fine.   Does anyone have any insight as to where the water is getting into this emblem? I intend to seal the new logo with slow curing epoxy this time around using a syringe.  I think this newer emblem may be an updated unit which I hope GM got the vendor to fix. It has an October 2025 date on it.    If this one  fails,  I am just going to revert back to the non-illuminated letters….AFTER PULLING THE GRILL.    Any thoughts on sealing with epoxy would be appreciated. Thx!   Doug  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...