Jump to content

Recommended Posts

Posted

Just got a 2018 Silverado the other day.  First GM product in about 17 years.  So far, I have learned one new thing about my truck, it has a taco folder in it.

 

When one of the key fobs doesn't want to play nice with the seat/mirror/pedal memory set up, and you try to save the settings, it will move the seat all the way down, the seat back will tilt all the way forward and there you are, practically sitting on the floor of your truck, folded over like a f'in taco.

 

 

  • Like 4
  • Haha 4
Posted

1st post here. Thanks for having me. I have a 2015 GMC Sierra.

I learned that while driving, a tap on the turn signal will give about a 4 second blink. However, if you have the "Tow" button selected you will get about a 8 second blink. Makes changing lanes with a trailer much safer and easier.

Sent from my SM-J327V using Tapatalk

  • Like 2
Posted

Can someone describe how to "Untag" a singer for the radio?  I accidentally 'Tagged' a performer and every time she appears I get the notice.

Posted
On ‎5‎/‎21‎/‎2018 at 4:00 PM, Cjmooch said:

For those who like to drift in the snow or need to turn off the traction control in sticky situations, hold down the traction control for about 5 seconds and the stabilitrak will also turn off, which turns off the traction control "even more". If stabilitrak is still on it will not let the wheels spin freely. This also works for other trucks as well, especially fords. This came in handy for the rental in colorado for doing donuts in the parking lot haha

I did this the first winter I had the truck, but I found out it still turns itself on when wheel speed exceeds roughly 30 mph.  That wheel speed is quite easy to achieve when having fun and when it engages mid slide/drift it puckers you up real quick.  What I also found out is if you unplug a wheel speed sensor the system faults and turns itself off for good.  To make this easy to do, I cut into the wiring harness and wired a switch into the dash.  I call it my "fun button", when I hit the switch, the dash lights up, the door chime comes on, but then I can drift to my hearts content with zero intervention.  Simply flick the switch back and everything goes back to normal!  Just don't re-engage it while braking because it momentarily activates ABS and you lose braking for a split second haha

  • Like 3
Posted
On 6/24/2018 at 8:31 AM, Rolling Thunder said:

Can someone describe how to "Untag" a singer for the radio?  I accidentally 'Tagged' a performer and every time she appears I get the notice.

While on the Radio screen hit the Menu button.

Look for TuneSelect.

Once in there you will options to tag/untag/manage your selections.

Posted (edited)
On 5/21/2018 at 4:00 PM, Cjmooch said:

For those who like to drift in the snow or need to turn off the traction control in sticky situations, hold down the traction control for about 5 seconds and the stabilitrak will also turn off, which turns off the traction control "even more". If stabilitrak is still on it will not let the wheels spin freely. This also works for other trucks as well, especially fords. This came in handy for the rental in colorado for doing donuts in the parking lot haha

Remove the fuse for the OBDII port and it completely disables all of it and make it feel like a truck from the 80s. Pops up a service stabilitrak message but goes away after you put the fuse back in.

 

edit: a few I've found:

-swiping left on the radio screen will switch the console in the dash to the audio panel, I do it in every truck I get in now to annoy the driver/owner.

-holding the tow button down for 5-6 seconds in tow mode will disable grade braking.

-holding the remote start button down for a few seconds when remote started shut the truck off, hitting lock and holding the remote start button down will extend the remote start time by 12 more minutes.

-2017+ 6L80 transmission tune was redone and has smoother / better shifting.

 

Edited by ic3man5
  • Like 1
Posted
On 6/23/2018 at 4:02 PM, EDL said:

Just got a 2018 Silverado the other day.  First GM product in about 17 years.  So far, I have learned one new thing about my truck, it has a taco folder in it.

 

When one of the key fobs doesn't want to play nice with the seat/mirror/pedal memory set up, and you try to save the settings, it will move the seat all the way down, the seat back will tilt all the way forward and there you are, practically sitting on the floor of your truck, folded over like a f'in taco.

 

 

lol i think thats the "easy exit" feature. I hit mine by accident sometimes

  • Haha 1
Posted
On 6/29/2018 at 1:26 PM, Ozer said:

lol i think thats the "easy exit" feature. I hit mine by accident sometimes

Yeah, I can set that with fob 2 no problem.   It's fob 1 that won't save it's settings, and instead of beeping twice after pressing set, it does that go to the floor and bend you over thing.

 

I need to take it in to to a dealer and have them reprogram the fob correctly, I just haven't had time to do it.

  • 2 weeks later...
Posted

Can't find it listed anywhere so I'd ask here. If the unlock button on the keyfob is pressed will the truck automatically lock itself if a specific time period passes before anyone opens the door?

 

I sometimes worry about hitting stuff hitting the unlock button accidently while it's in my pocket at the gym and not realizing it.

Posted

2015...I know about the keyfob mirror folding. Is there a way to get them to fold in when you exit the truck? Like with the seat moving back for exit? 

Posted
1 hour ago, Roscopcoletrain said:

2015...I know about the keyfob mirror folding. Is there a way to get them to fold in when you exit the truck? Like with the seat moving back for exit? 

Top middle button on the mirror adjustment block on the door. Sorry, I don't have a picture for you right now.

Posted
2 minutes ago, Mileguru said:

Top middle button on the mirror adjustment block on the door. Sorry, I don't have a picture for you right now.

Yeah I know about that as well, sorry. Was hoping you could just have them fold when you exit like the seat moving back

Posted

Ahh, that I have not tried to figure out yet (out of laziness, sadly). Sorry.

What I do is hold the lock button down on the key fob for a couple extra seconds when locking the truck to fold in the mirrors.

  • Like 1
Posted

New truck for me and I am playing, but I found that if you go into settings on the dash display that you can add things to the information screen like engine hours, trans temp and best of all for you off-roaders, a inclinometer for truck angles. I’m not sure if this was general knowledge or not but I did not see anything about it in the manual.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • It was never mandated.  Ever.    Automakers were incentivized to install it by getting CAFE credits to help with their vehicle fleet fuel economy scores.  They were being handed money/CAFE credits to install it.  Which is NOT a mandate.       The current admin removed the incentives that were behind them installing it.       
    • Are you playing Slide Down endlessly but your score is still low? Are you constantly crashing into obstacles as the game speed increases? Don't worry, this article will share 5 invaluable tips to help you master the race and impress your friends. Golden Rules 1. Look one step further. The mistake of 90% of new players is only staring at their character. The secret of experts is to look towards the top of the screen (where the slide is about to appear). This gives your brain an extra 0.5 - 1 second to process the situation and determine the direction of movement before the obstacle approaches. 2. Use gentle movements; don't swipe too hard. Slide Down is very sensitive. Moving your finger too forcefully or with excessive amplitude will cause your character to be thrown off course or crash into a wall. Practise moving your finger with small, decisive, and precise movements. 3. Don't be greedy for gold in dangerous locations. Gold coins are tempting for buying skins, but life is more important. If you see a gold coin right on the edge of a cliff or next to a spike trap, ignore it. Our goal is a High Score, and your score only increases if you survive. 4. Make the most of Power-ups. During the slide, you'll encounter items like Magnets (attract gold) or Shields (temporary invincibility). Never miss them! Especially the Shield, it's your "get out of jail free card" to help you get through those deadly fast sections. 5. Stay calm when speed peaks. When your score exceeds 500 or 1000, the game speed will be very fast. At this point, don't try to think logically; let your natural reflexes work. Take deep breaths and don't panic. Apply these 5 tips to your next game, and your leaderboard will surely improve dramatically. Good luck climbing the Slide Down leaderboard!
    • If you use compressed air regularly, one problem you cannot ignore is moisture. Water in the air line can cause rust, unstable air pressure, poor tool performance, and even damage to sensitive equipment. That is why I highly recommend using a desiccant air dryer. A desiccant air dryer is designed to remove moisture from compressed air by using drying materials such as activated alumina or molecular sieve. Compared with basic water separators, it can achieve much lower dew points, making it especially useful for applications that require dry and stable air. For workshops, painting systems, pneumatic tools, CNC machines, laser cutting equipment, and industrial production lines, a desiccant air dryer can make a big difference. It helps protect equipment, improve air quality, reduce maintenance costs, and extend the service life of the whole compressed air system. Another advantage is reliability. Many desiccant air dryers are built for continuous operation and can maintain stable drying performance even in demanding environments. For users who care about long-term efficiency and equipment protection, this is a smart investment. When choosing a desiccant air dryer, I suggest paying attention to air flow capacity, working pressure, dew point performance, regeneration method, and maintenance requirements. A good model should match your compressor system and actual air consumption. Overall, if moisture is causing problems in your compressed air system, a desiccant air dryer is definitely worth considering. It is practical, efficient, and highly useful for anyone who needs clean, dry, and reliable compressed air.
    • My brand new 2007 Silverado's wax frame was rust from end to end partway through it's SECOND winter here in MA. That stuff is completely useless.    
    • I went another direction after losing a trailer tire, thanks to not being able to access air at ANY of the 5 gas stations and garages I stopped at prior, with a Toyota Tacoma onboard, 50 miles from the Canadian border. They were either out of order, access was blocked, or the hose a few feet too short and I couldn't get any closer without risking damage to someone's property.   https://postimg.cc/gallery/X5QJ55w
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...