Jump to content

Window tint


ron mexico75

Recommended Posts

Posted

Just wondering what the opinions would be here. I have 20% on the front doors to match the factory tint on the back doors and back window. I’m wanting the entire back sliding window to be blacked out. I don’t want people to see in when they’re sitting behind me I guess is the best way to put it. Was at the shop that does window tinting for something else the other day and mentioned making it darker. The guy recommended putting 20% over the factory tint.

 

Would it be better just to do 5%? I know that seems right above spray painting the window black… Ha ha. However you figure if you’re looking in the back window from a car, the windshield is in front so it’s lightning it up a pretty good amount right?

 

 

Posted

Without knowing the tint laws where you live, it's impossible for anyone to give you a definite answer.  Go to the tint shop you use and tell them you want it tinted as dark as you can legally go.

Posted

20% over factory is basically like running 5% over clear windows people behind you wont see you either way.

Posted

My question with installing tint over tint is if it would distort your vision a lot. I'm not 100% certain as I've never done that but it makes sense to me. 
I did 5% on one of my previous vehicles, which is what we call limo tint and in the daytime it was great but at night it got rather annoying... add in a rainy night and you're backing up and to me it became really difficult to see unless you're in a really well lit urban area. Moral of the story is that I never did it again because although it looked awesome and nobody could see you, it just pissed me off. 

To add to it, it can become a cop magnet in some areas. 

Posted

My night vision is pretty bad as a LASIK side effect, but I haven't had issues with tint at night. Are people completely tinting their windshield?

Posted
Without knowing the tint laws where you live, it's impossible for anyone to give you a definite answer.  Go to the tint shop you use and tell them you want it tinted as dark as you can legally go.


Damn… Totally forgot I posted here a couple weeks ago.

In Virginia, as far as trucks and SUVs you can go as dark as you want on the back doors and back window. Technically front windows aren’t supposed to be below 50%. I’ve been rolling around with 20% on different vehicles for over 18 years with no problems.
Posted

I have an appointment this Saturday morning and I told them I wanted to get the two rear doors and the back sliding window done. My front windows have already been tinted 20% to match the factory tint on the back doors.

Here’s what I can’t decide. I’m almost thinking of not having the back crew cab doors done and just getting the rear sliding window tinted 5%. I’m not sure I want the truck to have that light tint/dark tint look when looking at it from the side. I think having all the same color just makes the truck look cleaner. I don’t know what do you guys think?

I definitely want the back slider totally blacked out. I’ve been watching some videos on YouTube and even SUVs that have the back done with 5% over stock, you can still look through the back window and see light coming in the windshield. Is there a way around that?

Would a layer of 20% over the back slider and then doing a layer of 5% over that totally black it out? Just not sure what I should do before my appointment Saturday.

Posted
29 minutes ago, ron mexico75 said:

I definitely want the back slider totally blacked out. I’ve been watching some videos on YouTube and even SUVs that have the back done with 5% over stock, you can still look through the back window and see light coming in the windshield. Is there a way around that?

So you don't want to be able to use your rear view mirror at all?

 

If you want to be able to see out, someone behind you will be able to see the silhouette of your head in front of the windshield. But that's about it.

 

Otherwise just get some black vinyl and actually make it opaque.

Posted
So you don't want to be able to use your rear view mirror at all?
 
If you want to be able to see out, someone behind you will be able to see the silhouette of your head in front of the windshield. But that's about it.
 
Otherwise just get some black vinyl and actually make it opaque.



No… I’d still use it just to see who’s behind me but whenever I back up a trailer or go in reverse I use my side mirrors and back up camera. I already have a big weather guard toolbox it takes away 1/3 of the window as it is.

I guess maybe do 5% over the factory tint and just see how things are.

What do you think about the rear doors? Obviously it’s my truck but just trying to get a general consensus of having all the same color looks better versus the dark back doors and lighter front doors.
Posted

I agree that from the outside it looks better when both side windows are the same tint.

 

My wife's car has 20% on the front windows and I hate it at night. I can't see out of them when turning, since there are no headlights pointing sideways.

 

I would never tint the front windows on my truck, but I like seeing out at night. Maybe you live in an urban area and are never truly in the dark, so it doesn't matter.

Posted
I agree that from the outside it looks better when both side windows are the same tint.
 
My wife's car has 20% on the front windows and I hate it at night. I can't see out of them when turning, since there are no headlights pointing sideways.
 
I would never tint the front windows on my truck, but I like seeing out at night. Maybe you live in an urban area and are never truly in the dark, so it doesn't matter.


Yeah just thinking it over and might just leave the doors as it is, stock tint on the back and 20% on the front.

I don’t know man I’ve had tint on every vehicle I’ve owned since the late 90s so I just must be used to it. I have no problems at night in urban or suburban areas.
Posted

This is mine with 20% up front and 5% on rear doors and back window. I'm actually thinking of going 5% up front as well or getting the front windshield tinted some to not let so much light in.... not sure yet.. lol

I can see out the back at night when cars are behind me (lights). It doesn't bother me. But I don't do that much night time driving in my truck. And I also installed side cameras, so I can see the side in my head unit when I turn my blinkers on or activate it whenever..

In the day, if looking from behind, yeah, you can see(shadows) from the back if it's bright outside due to that big windshield letting so much light in. But that's about it. b97b4c384c33e4d3bf85d5356ee55cbf.jpg7d7996ae92ca956a4dc2a358838c4af7.jpg

Sent from my SM-N950F using Tapatalk

Posted
This is mine with 20% up front and 5% on rear doors and back window. I'm actually thinking of going 5% up front as well or getting the front windshield tinted some to not let so much light in.... not sure yet.. lol

I can see out the back at night when cars are behind me (lights). It doesn't bother me. But I don't do that much night time driving in my truck. And I also installed side cameras, so I can see the side in my head unit when I turn my blinkers on or activate it whenever..

In the day, if looking from behind, yeah, you can see(shadows) from the back if it's bright outside due to that big windshield letting so much light in. But that's about it. b97b4c384c33e4d3bf85d5356ee55cbf.jpg7d7996ae92ca956a4dc2a358838c4af7.jpg

Sent from my SM-N950F using Tapatalk





Looks great man. Thanhs for posting those pics and explaining about the back window. That’s what I was looking for.

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • Hey everyone, I recently had an issue with my 07 2500HD GMT900. My DRL’s stay on at all times. Right front turn and right mirror turn signal indicator stay on solid at all times. By “at all times” I mean the only way to make them go off is disconnecting the battery. I tore the headlight assemblies out, tried disconnecting the harnesses to eliminate bad wiring at the harness, I unplugged the headlight switch, no change and the mirror turn signal still stayed on. My first thoughts were : Bad bulb and/or socket somewhere, under hood fuse panel bad, bcm bad, tail light or trailer wiring problem, or some random short to power in the harness.  Possibly a bad ground but unlikely. I had a big clue in the fuse panel, it had a burnt smell. I started pulling every fuse that had to do with DRL or right turn/park lamp. Nothing made the right directional turn off but pulling the DRL2 fuse made the DRL’s go out.  After studying wiring diagrams, I found that both problems had that fuse panel in common, the bcm also controls both problems but knowing the fuse panel had a burnt smell I removed and disassembled the fuse panel and found a little corrosion on the printed circuit board.  I ordered a new fuse panel from Amazon for like $260. When it arrived I installed it, and put everything back together, the problem was fixed. I figured the fuse panel needed to be replaced anyway so that was a logical place to start. Hopefully this story helps someone in the future. Regretfully I didn’t scan for codes before I did everything.
    • That stinks. I’m sitting on the side of the road right now with the same issue. Never had an issue before taking it in for the ground strap recall. Now I’m outside of warranty and they’ll probably want $200 just to diagnose what they already “fixed”. 
    • I wonder kind of nuts and bolts they will come up with next? Jim
    • “It should be recognized, however, that there becomes a point where fuel economy oils do not make much economic sense for the end consumer—we talk about a fuel saving of ~€100 compared to a risk of €1000 Euros if the oil is too thin and causes increased engine wear rates. However, the benefit of these oils accrues to the car manufacturers. If their vehicles can save 1–2% fuel by using a special fuel economy lubricant, then that OEM can drastically reduce the amount of fines they need to pay.”   I liked this and the following paragraph as well but it’s really only touching the beginning of the benefits OEMs see from spec’ing these oils. After you factor in “out of warranty” service work and new car sales when these engines fail before their time, it’s a good racket for them. Just because you're paranoid doesn't mean they're not out to get you!
    • Too much voodoo and snake oil.   Time to go EV    😉
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...