Jump to content

Recommended Posts

Posted (edited)
On 10/30/2018 at 1:51 PM, Sierra Dan said:

My '94 was around 24K if memory serves me correct.

A comparably equipped 2018 is around the 40k mark for an LT package today.

I would not spend that for a Reg. Cab Short Bed

A recent search only yielded about 200 of them within a 500 mile radius.

This also includes Standard Bed Reg. Cabs..... so rare indeed they are!

 

I will not spend anything on a 4 door. I had no issues dropping $44,000 for my RCSB Sierra with the options I required. I would have dropped $55,000 if they would have made me a RCSB Denali. Heck, I would have spent $70,000 for a 6.2L 4x4 Denail RCSB. I will not buy any new truck that isn't a RCSB the minute they stop making them is the minute I never buy another new truck. Thats just me... I hate 4 door trucks. I dont need and dont want 4 doors. 

 

Your search included V6 long beds.... find loaded ones. Typically one in a 500 mile radius. 

 

 

Edited by frenchsquared
  • Like 3
Posted
12 minutes ago, frenchsquared said:

Heck, I would have spent $70,000 for a 6.2L 4x4 Denail RCSB.

 

It's frustrating when you have a want, and cash in hand, but nobody to take it, eh?

 

For $70k though, you could probably pay somebody to do a Denali conversion of sorts, and get most of the Denali Features, or at least get a 6.2L swapped under the hood.

Posted
4 minutes ago, rkj__ said:

For $70k though, you could probably pay somebody to do a Denali conversion of sorts, and get most of the Denali Features, or at least get a 6.2L swapped under the hood.

I could do the swap myself. I strongly considered it. I am going to super charge the 5.3 instead and not spend the money. if GM built it I could finance it. If I have to built it, it takes cash. 

  • Like 2
Posted

I’m with you on the loaded rcsb. I have owned a number of them over the years. If gmc would build a rcsb at4 6.2 i think i would have no choice but to own one. 

  • Like 3
  • 4 weeks later...
Posted

The GM Upfitter website still shows a RCSB but the drawings and schematics have "Not for public release" plastered over them. Makes me wonder if a decision to drop that model was made.

Posted

I think a very limited consumer interest and zero corporate interest killed the rcsb at GM. Ram is in change over mode for 19 so none their this year so I have been told. Pretty sure Ford is the only game in town for rcsb for 19.

Posted
The GM Upfitter website still shows a RCSB but the drawings and schematics have "Not for public release" plastered over them. Makes me wonder if a decision to drop that model was made.



Could mean fleet/government only...?


Sent from my iPhone using Tapatalk Pro
Posted
3 hours ago, pronstar said:

 

 


Could mean fleet/government only...?


Sent from my iPhone using Tapatalk Pro

 

 

I doubt that. It's almost like the drawings were supposed to be removed/redacted like when you see a classified government document released covered in black ink.

Posted
On 11/14/2018 at 3:40 PM, frenchsquared said:

I will not spend anything on a 4 door. I had no issues dropping $44,000 for my RCSB Sierra with the options I required. I would have dropped $55,000 if they would have made me a RCSB Denali. Heck, I would have spent $70,000 for a 6.2L 4x4 Denail RCSB. I will not buy any new truck that isn't a RCSB the minute they stop making them is the minute I never buy another new truck. Thats just me... I hate 4 door trucks. I dont need and dont want 4 doors. 

 

Your search included V6 long beds.... find loaded ones. Typically one in a 500 mile radius. 

 

 

 

I agree with ya, always loved the look of the rcsb trucks, however I do like having a little bit of storage space in the rear, so I've always gone with extended cabs.  I just don't understand the obsession with people driving the four door trucks, I always see one person a nobody riding with them.  Maybe they are just working and dont have family with them at the moment, but I know it usually is just myself and gf or occasionally might have a friend ride along but its short distance where the extended cab is fine. 

Posted

many times with rebates you could get a double cab as cheap or cheaper than a rcsb equipped with the limited options offered. Then as we all know most everyone buying new wants at least a double cab at the very least for the xtra seating capacity and or storage . The secondary market also is demanding basically the same . It all helps keep ''trade in'' or resale value higher. Marketing and buying trends left the rcsb with a very small hand to play in a game stacked against it sadly.

Posted
19 minutes ago, SuthrnZ71 said:

 

I agree with ya, always loved the look of the rcsb trucks, however I do like having a little bit of storage space in the rear, so I've always gone with extended cabs.  I just don't understand the obsession with people driving the four door trucks, I always see one person a nobody riding with them.  Maybe they are just working and dont have family with them at the moment, but I know it usually is just myself and gf or occasionally might have a friend ride along but its short distance where the extended cab is fine. 

I put bed covers on them. That way suitcases, bags tools and whatever fit in the bed. Not for everyone but works great for me. Ben driving RCSBs for 20+ years. I'm just use to it. 

  • 1 year later...
Posted

Sorry to bring back  a old thread but .

Just found this thread. What makes me laugh more and more is when i go into lumber yard, where you have to have a Contractor account and even big box stores and you see people who are obviously contractors or work on my Industry and loading plywood into there so called truck and it sticks  3 foot past the bed or a ladder laying on the tailgate and roof of a BRAND NEW  DOUBLE CAB TRUCK. They obviously bought what they wanted not what they needed. 

I had to drive  70 miles to a Stealership in the middle of no place Indiana too get my  2020 Silverado Reg cab long bed. The trucks on the lots here are all  Feet type steel wheels , Crank windows and so on.  Mine has about all the options you can get in a WT Truck and cost more then some of the Custom  double cab trucks.    

I would never buy a Pickup truck without a  8 foot bed. ohh and its 8ft 2 inches  by the way. Lots of storage room behind the seats as well. 

I call it my Silver Unicorn truck because i have only seen one other in my area on the road.   

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • They are talking about adding more tax to our fuel across Canada by the labour day time frame, its the carbon idiot tax increase on top of the pile of fuel taxes we already pay thanks to the WEF dictatorship running the country. 10 cents per liter on gas and 4 cents a liter on diesel I believe is what was said. That is a huge amount of a tax increase as its another 38 cents equivalent to a US gallon of gas. The reason our fuel is higher than the states already is because of of the high taxes they have imposed on fuel. 
    • This is just a thought as I can't claim this is the correct thing to do but will suggest it and you can decide if its something you would try. First round up some electrical contact cleaner spray as they at least claim its not supposed to damage the components ( brake cleaner depending on the type is a real destroyer of plastic etc ) and to use that to assist to clean out any grime from the pins as well as the mechanism by spraying and working the lever etc. Then my next thought is to use silicone spray lube and not on the pins but on the seal and the pivot assembly. It may not be possible to spray it on certain area's and have to use a q tip as Davestar mentioned to keep it from getting on the pins. Dielectric grease can be fine on some things but its easy to get too much on if not careful and then gunk things up and a possible risk of getting it on the pins or sockets. The silicone spray is able to get into a mechanical component to help lube and on surfaces its just a fine film to reduce friction such as that seal. Also it can be doused off with a good flush of the electrical contact cleaner the next time for a repeat of a "clean and then lightly lube" step process to wash off any dirt that had stuck to the exterior etc of the plug.   Free advice, yes. Good advice ... now there's the question mark !    
    • Hey thanks yall for the info. It apparently was the key fob - the "reserve" key fob works just fine. Yall were all over it. Great input! JRD
    • I just bought one of these.   https://www.topdon.us/collections/diagnostic-tools/products/artidiag-pro   Yeah, it`s got a cable. $250/year after 2 years. Do I want more? Yep. But, I`m not working any more and can`t afford a whirlpool in my tool box.
    • Why don't I have a good scanner? I've always wanted one when I've needed one.   My latest reading says I don't need to do a relearn on the ckp sensor on a 1995 with OBD 1.5. The relearn is prescribed for the later-model 1995's which shipped with actual OBD II when GM completed the transition in prep for the 1996 MY. I need to confirm that. Did you know forums are disappearing? Knuckleheads on Facebook... it's not the same. It's just not.   So, scanners. Again, shooting myself in the foot for having eBayed my Snap On MT2500 "brick" with all the adapters. Not that I couldn't buy another but those are getting quite old, and mine wasn't new enough to work on 2000's vehicles.   Damn it (as I'm scanning my email between paragraphs here). Did you know there's a 2000 Jimmy 2-door on BaT that's ending this morning? It's local. I want it. 14k miles. Absolutely beautiful.   Back to scanners. MT2500's are old. Solus, now that could be a contender. There's a ~2008 Verus with a system error that's basically new in box for cheap. Hmm...I'm not sure about a scanner that runs an archaic version of windows (95 or CE, I can't tell).   I want the ability to reset and rotate TPMS, test individual modules, bleed ABS, electronic parking brake controls for servicing brakes, relearn procedures and other bidirectional controls.   Snap On does an MT2600. It's a new model as of last year, marketed as their "entry" scanner. Entry? Only where $1900 gets you through the doorway plus, I'm guessing, $1000/year if you wish to keep it current. So goes scan tools actually designed for production environments. Want decent products with excellent support, you pay for it.   Everyone is raving about Autels and TopDons and Foxconns and all these newer brands that are selling the $500 "prosumer" scanners for backyard hacks like me. They're tempting...honestly. Updates are cheaper, base prices are remarkably cheaper... And you get to deal with bugs and translation whoopsies and, well, just don't use it on anything expensive, OK? Having a dealer replace an ECU because it needs to be re-imaged after an adventure in scanning is no joke. But I think most people are getting by OK with these units.   eBay on a scratch-and-sniff pro-model oldie, a shiny new TopDon, or???   God dang it, I can't stop looking at this Jimmy. I'm ready! I'll Bring The TRailer! It's beautiful.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...