Jump to content

Recommended Posts

Posted

Thanks guys.  I totally understand how the forums work.  You rarely hear from the people who are totally satisfied with their trucks.  However, after reading all about the issue, it seems hard to believe that GM doesn't know they have a problem on their hands.  Here is an update as to where I currently stand...

 

I spoke with my Senior Advisor today.  Apparently a "new" bulletin has just been released by GM regarding the TCC shudder.  GM is releasing special tooling for dealerships in order to fully flush the transmission fluid from the truck.  I guess blowing out the lines with 60lbs of pressure wasn't doing the trick.  So at least they are making headway on it.  However, I was also told the tooling will not ship to my dealer until February 14th at the earliest.  Being as my truck shudders constantly between 40 and 50 mph (where I drive 90% of the time), I told the Advisor I felt GM should supply me with a loaner vehicle until the tooling arrives and my truck is fixed.  She then called my dealer who, of course, told her they wouldn't do that.  She called me back and said she was going to get in touch with the GM Regional Manager.  I am currently waiting on a call-back from her regarding his/her decision.  I can tell you one thing though.  If GM decides not to put me in a rental, they can kiss this customer goodbye.  In the past 10 years I have purchased 8 brand new Chevrolet's from this dealership.  I have been a very loyal customer to the brand.  If I am not shown some loyalty back, I will be taking my hard-earned money to a competitor and won't look back.  

Posted
I have to agree with this.... You usually only hear about the bad ones...although there are a lot of people that may or may not have issues that don't know about this forum either.. But this does sound like a pretty big problem for GM since its not only our trucks..Camaro and Corvettes have the same problems..
 
I have my 2018 truck about a year now and 8500 miles and I don't have any issues with mine... My only real complaint is when doing a rolling stop and getting back on the gas it will act like its in neutral ( rpm goes up while coasting ) then slam into 1st... if I actually stop, there are no issues... I tried different speeds on the highway and no shuttering at all...so far
 
Just throwing it out there my 2018 was built in 11/2017 , not sure if time of build has anything to do with it
 
I know the 2015-2016 trucks had a lot more issues than the 2017-2018 models do., but I wonder how many 2018 models have this issue?? Most of the posts on here are 2015-2016 trucks, there are not too many specifically on the 2018s yet.
Sounds just like your torque converter is on its way out.

Sent from my LG-G710 using Tapatalk

Posted
27 minutes ago, Snowcamo said:

Sounds just like your torque converter is on its way out.

Sent from my LG-G710 using Tapatalk
 

Im not  sure,  it was like that since new... Hasn't gotten any worse

Posted
Im not  sure,  it was like that since new... Hasn't gotten any worse
Man that just ain't right bud. Something is a bit off. Only auto trans I know that "flashes" like that was the 700r4.

Sent from my LG-G710 using Tapatalk

Posted (edited)
4 hours ago, bigman32hockey said:

Thanks guys.  I totally understand how the forums work.  You rarely hear from the people who are totally satisfied with their trucks.  However, after reading all about the issue, it seems hard to believe that GM doesn't know they have a problem on their hands.  Here is an update as to where I currently stand...

 

I spoke with my Senior Advisor today.  Apparently a "new" bulletin has just been released by GM regarding the TCC shudder.  GM is releasing special tooling for dealerships in order to fully flush the transmission fluid from the truck.  I guess blowing out the lines with 60lbs of pressure wasn't doing the trick.  So at least they are making headway on it.  However, I was also told the tooling will not ship to my dealer until February 14th at the earliest.  Being as my truck shudders constantly between 40 and 50 mph (where I drive 90% of the time), I told the Advisor I felt GM should supply me with a loaner vehicle until the tooling arrives and my truck is fixed.  She then called my dealer who, of course, told her they wouldn't do that.  She called me back and said she was going to get in touch with the GM Regional Manager.  I am currently waiting on a call-back from her regarding his/her decision.  I can tell you one thing though.  If GM decides not to put me in a rental, they can kiss this customer goodbye.  In the past 10 years I have purchased 8 brand new Chevrolet's from this dealership.  I have been a very loyal customer to the brand.  If I am not shown some loyalty back, I will be taking my hard-earned money to a competitor and won't look back.  

Maybe I can lend some info here on this issue. I’m an ex tech and for 25 years a factory field service rep ( not Gmc) so have been around the block. I had a 2017 6.2 8 speed and we replaced 2 converters and 3 flushes. Not to bad driving but pulling an rv was a dog ?   peach seeds it shook so bad. It did settle down after 10 k miles but always there. Family member bought it so I purchased a 2018 identical truck Max tow 6.2 8 speed end of production vin thinking this was it and all the problems cured. Wrong. Same thing.  IMO it is a tq modulation and the fluid breaks down.  Instead of me getting upset I just lowered my expectations of a Gmc truck.  Waiting for fluid fix and I don’t think you’ll get a rental as it is still drivable unpleasant as it is. You might be lucky especially if a good customer. I’m as anal as anyone on this problem ( ton of posts) but sitting back waiting to see if it really is repairable  I understand the 2019 8 speeds do not have this condition but I believe a different converter is used. End of my rant ??

Edited by Bigmac
Posted

hey bigmanhockey32

 

i have experienced the odd lurch forward after remote start.  it's happened a handful of times since new.  6.2L sierra crew, mfg date 8/2018.  it was more prevalent when new and hasn't happened in a while.  about 3000 miles on it now.

 

so yeah, after a remote start i get in and as soon as i turn the key, the whole truck lurches forward.  i do set my parking brake every time i stop.  maybe the parking pawl didn't fully engage until the key was turned on again?  not sure if that makes sense.  it has only ever happened after a remote start.

 

anyone else ever experience this?

 

i do not have the shudder issue.  other anomalies include a hesitation when shifting from first to second (only seems to be when cold though).  the shift from first to second is also much firmer than other shifts. 

 

 

Posted
14 minutes ago, teamkeystone said:

hey bigmanhockey32

 

i have experienced the odd lurch forward after remote start.  it's happened a handful of times since new.  6.2L sierra crew, mfg date 8/2018.  it was more prevalent when new and hasn't happened in a while.  about 3000 miles on it now.

 

so yeah, after a remote start i get in and as soon as i turn the key, the whole truck lurches forward.  i do set my parking brake every time i stop.  maybe the parking pawl didn't fully engage until the key was turned on again?  not sure if that makes sense.  it has only ever happened after a remote start.

 

anyone else ever experience this?

 

i do not have the shudder issue.  other anomalies include a hesitation when shifting from first to second (only seems to be when cold though).  the shift from first to second is also much firmer than other shifts. 

 

 

I dont have the lurch forward, never did, and I have been using the remote start often now that its cold here in the NE.

 

Whats interesting, is that when my truck is cold, I feel its shifts better than when it gets warm... When i go to work first thing in the morning its been about 10- 20 degrees lately and the shifts are firm and positive and when it gets warm there seems to be more hesitation, like it takes extra timing out during the shift when warm.

Posted
21 minutes ago, teamkeystone said:

hey bigmanhockey32

 

i have experienced the odd lurch forward after remote start.  it's happened a handful of times since new.  6.2L sierra crew, mfg date 8/2018.  it was more prevalent when new and hasn't happened in a while.  about 3000 miles on it now.

 

so yeah, after a remote start i get in and as soon as i turn the key, the whole truck lurches forward.  i do set my parking brake every time i stop.  maybe the parking pawl didn't fully engage until the key was turned on again?  not sure if that makes sense.  it has only ever happened after a remote start.

 

anyone else ever experience this?

 

i do not have the shudder issue.  other anomalies include a hesitation when shifting from first to second (only seems to be when cold though).  the shift from first to second is also much firmer than other shifts. 

 

 

Thanks teamkeystone.  Glad to here I'm not the only one who has experienced the lurch after remote starting.  I totally agree with you about the shifting.  Mine seems to shift much harder from 1st to 2nd.  After that, it does seem to smooth out somewhat.  I just don't think this is one of the better transmissions available.  Sad to say with it being such an expensive vehicle.  

Posted

Well, I was informed by my Senior Advisor that the Regional GM Rep. denied my request for a loaner vehicle.  I guess I'm not surprised.  I am, however, disappointed.  Apparently because GM does not deem it a safety issue, they won't do anything.  I am supposed to wait until my dealership gets in the new tooling to do the fluid flush.  That is supposed to be sometime in mid February.  The GM Rep who denied my request should drive over the rumble strips in the middle of the road for the next 3 weeks.  At least then he/she would know what I'm dealing with on a daily basis in my brand new truck.  In the meantime, I'm just supposed to deal with it according to GM.  I've purchased 5 brand new Silverados in the past 7 or so years.  This is the thanks I'm shown?  I told my Advisor I won't be purchasing another GM product when the time comes for a new truck.  Her response?  "Oh, OK.  Is there anything else I can do for you?"  Is there anything ELSE you can do?  You have to actually do SOMETHING before you ask if you can do anything else!  The whole Senior Advisor thing is a joke.  It's just a way for GM to make you think they care.  They don't.  So much for being a Chevy "Truck Legend".  This legend is taking his bank account elsewhere.   

Posted

I changed my windshield wiper fluid and that fixed the issue, try it might work for you.


Sent from my iPhone using Tapatalk

  • Haha 2
Posted

New to the forum.

 

Just spoke with dealer re my 2017 High Country (6.2 and 8 speed).  They tell me there is "yet another new fluid being used to replace the fluid in trucks exhibiting ..."  Further, that the fluid is being provided to warm states first as the issue is more common ... that it is related to moisture.

 

Mine is being changed - BUT, there is a line of 10 trucks ahead of me ... :-)

 

Hopefully 2017 Darkness is correct - this will be a great thing!

 

BTW - ajensen383, there are huge numbers of people who suffer in silence or have been told by dealers, "they all do that," and they believed them.  But, I get your point ...

Posted

New to this forum.

In regards to this subject, is the shudder that some are experiencing feel like as if you were driving over rumble strips (wake up strips that are on the side of road)?   That is the shudder that I am having.  Seems more RPM related then mph as it will happen at speeds around 65-75 mph or speeds around 40-50 mph.  When it happens and taking foot off gas pedal (coasting) it goes away and may or may not return.  I though i read somewhere that it could be the throttle position sensor.  Thanks is advance to any responses.

Posted

Ha - so, after dealer explaining as I outlined a couple of posts, above, another person at the dealership called back a few minutes ago and they said nothing was wrong what it!

 

The story was the shop forman had driven it and it was not shuddering.  I asked how I could have  such a pointed, coherent discussion yesterday with an exact plan, down to the name of the transmission guy, with the service rep, and then today have a completely different story from a different person - almost as if yesterday didn't occur?  Answer - the service rep from yesterday is now on vacation for a week.

 

Follow up from me - did you not drive the truck until today?  How could the story from yesterday exist if you didn't drive it yesterday?

 

I made a recommendation for this new person to talk with the same people the rep yesterday spoke with - and requested a call back.

 

I'm guessing this will end with me picking the truck up, driving it until it starts again, and then taking it back ... probably several times.  On the other hand, perhaps it has magically disappeared?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Can anyone explain why the oil pressure runs higher after the DFM is shut off?  just installed the Pulsar Lt.
    • Thanks!  I figured as such; GM and other manufacturers have used standard parts and harnesses across trim levels and such for decades.  I pulled the blank accessory cover off of my commuter van (a 2016 or so Chevy 15-passenger) years ago and found the plug for a USB outlet.  It wasn't connected to anything, though (I tried swapping in an outlet from another van).  I was a GM Tech years ago (late-90s) and was pretty familiar with my 2006.  I might be wrong, but I view newer vehicles (pretty much anything made in the past 20 years) as being a lot more plug and play.  Meaning, more unused wires and plugs unless you have the Mack Daddy of vehicles.    
    • not all plugs will be used.  gm uses more generic harnesses that support most/all options, and if your truck doesn't have a specfiic option, the plug won't be used (commonly will have a dummy insert in the plug , or it'll be taped up, but some may just be left as is).  But it's sldo possible some p.o. has installed the wrong/cheaper parts that aren't correct for your vehicle...
    • First off, I'm not trying to just get easy advice/fixes for the issues I've noticed so far.  I'll be combing through the site via searches and such, and if past experiences are any indication, should find what I need.  For the sake of conversation, though, I figured I'd post the handful of things I've noticed in the 12 hours since buying my 2010 SLE CCSB.     Indicator lights: Airbag and TPMS.  The tire pressures aren't reading for any of the wheels, so I'm pretty certain the sensors were either removed, are damaged, or are otherwise inoperable.  I used to mount and balance tires 25 years ago but am pretty much ignorant when it comes to TPMS.  My 2006 didn't have the sensors and this might be the fourth vehicle I've owned that does.     Radio: Rear speakers aren't working.  I removed the driver's side rear door panel and checked the speaker and wiring.  I also removed the sill and b-pillar covers to check the wiring.  A few minutes of Google Fu showed that this is potentially a head unit issue.    Switches: Power mirrors don't turn left/right.  I ordered replacement driver's door switches that should arrive tomorrow.  The windows and locks work but it was only about $20 for all of them.  The driver's side rear window switch lets the window down but won't put it back up.  I think the passenger rear doesn't work at all.  In the coming days/weeks, I'll break out my multimeter to check all of that.   Unknown wiring harness: There's a box attached to the front driver's side of the engine compartment, right where the second battery shelf is located.  There are three plugs, one of which looks like it fits a standard headlight-style bulb (9007 or similar).  It doesn't look like it's plugged into anything.  I'll do some digging and if I don't see anything elsewhere on the site, post some pictures here.   Unknown plugs on brake booster: There are at least two female plugs on the brake booster that aren't being used.  I think it might be a replacement/aftermarket, so maybe those are used for a different application, as there don't seem to be any unplugged harnesses and no indicator lights are on.   Little squeaks when turning: Sounds almost like a bushing around the bed of the truck.  I'll have to pay close attention as I get more familiar with the truck.   Clunk on acceleration: possibly the infamous drivetrain clunk.  My 2006 had it and I'm just not familiar enough with this truck yet to fully grasp what it is.   Anyway, my apologies for the vague and all over the place post.  This truck is new to me, and it's been four years since I drove my 2006.  With 200k miles, I know I'll need to learn this truck quickly to avoid having any major issues, despite being confident it's got much more life to it.  My 2006 had nearly 320k on it when I parked it (nearly 300k of which I put on the truck), and it was still drivable then, though I suspected the head gasket might have blown.  I'd hoped to have that truck back by now, but it's gone forever, as I detailed in my reintroduction thread.  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...