Jump to content

2019 GMC Sierra AT4 - De-Badge

Taz56

By Taz56
in Modifications, Wheels & Tires

 Share

Recommended Posts

Taz56 Enthusiast

Taz56

Posted
Posted

Took off what I can, left what I can't. Much "cleaner" look.

IMG_3971.jpg

IMG_3972.jpg

IMG_3980.jpg

IMG_3981.jpg

MaverickZ71 Senior Enthusiast

MaverickZ71

Posted
Posted (edited)

It's your truck, so whatever floats your boat.  Personally, I think it's a much "cheaper" look, especially at trade-in or selling time.  

 

Cheers.

Edited by MaverickZ71
Taz56 Enthusiast

Taz56

Posted
  • Author
Posted

Absolutely not true. I had a 2014 GMC All Terrain and de-badged it as well. The GM dealership jumped at it when I traded it in. Had no difference what so ever on their choice to snag it.

  • Like 1
Controller23 Enthusiast

Controller23

Posted
Posted

Seems like an appropriate thread. Dealer stuck their damned sticker on my truck(tailgate). How do I go about getting it off?


Sent from my iPhone using Tapatalk

88junior Enthusiast

88junior

Posted
Posted

Dealer stickers come off any vehicle I buy as soon as I get home with it. They usually peel right off. Just clean up afterward to get any sticky stuff off. 

eppieguy Senior Enthusiast

eppieguy

Posted
Posted

If you let it sit in the sun for a little bit it comes off easier, just pick up a corner with your finger nail.

OnTheReel Senior Enthusiast

OnTheReel

Posted
Posted

I make the dealer take all of their junk off unless they want to make some payments for me! 

 

Otherwise a light touch of a heat gun and it’ll peel right off. Isopropyl alcohol or goo gone will take care of any residue and then put a coat of wax over where it was.

Mrgolde Enthusiast

Mrgolde

Posted
Posted

Anyone have a red 2019 that they debadge?  I’m just curious what it would look like if I did. The chrome looks decent on red tho.

  • 1 year later...
bigearl05 Enthusiast

bigearl05

Posted
Posted

I have a 2020 AT4 carbon pro with the black AT4 badges and i'd like to swap those for the regular chrome AT4 badges.  Anyone have some lying around they wouldn't mind parting with?

RWTJR Enthusiast

RWTJR

Posted
Posted

I'm in camp de-badge. I removed the Z71 Badge (oh no, how will anyone know my truck is special) from the fender and the Silverado & RST from the tailgate. I also removed the fender badges from my Camaro and the pin-striping from my (wife's) Equinox.

 

I have always removed any vinyl (pin-striping, decals, etc.) I can as soon as I can. I greatly dislike vinyl on paint.

20201125_105414.jpg

20201125_105434.jpg

20201025_105507.jpg

TA^Guy Enthusiast

TA^Guy

Posted
Posted
On 9/7/2019 at 2:51 PM, Controller23 said:

Seems like an appropriate thread. Dealer stuck their damned sticker on my truck(tailgate). How do I go about getting it off?


Sent from my iPhone using Tapatalk

A little heat and you should be able to peel them off.  If that doesn't work buy a decal/adhesive wheel.  I just used one on my truck after removing the "SIERRA" badge and it worked awesome.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • bluev8
      Intermittent no-code issues on 2022.5+ V8 trucks — what did the shop fail to capture?

      By bluev8 · Posted

      That makes sense, and I think you are describing the real product problem. Capturing data is the easy part. If the owner or technician has to manually dig through five minutes of millisecond-level logs, the product has already failed. The device would be at the ECM harness, not at the OBD port, so I agree that data retrieval and event marking need to be thought through carefully. The way I am thinking about the architecture is: The recorder itself should not depend on a phone, app, Bluetooth, Wi-Fi, or cloud connection to capture the event. It should always keep a local rolling buffer and lock the event locally. A button, phone app, or small cabin device would only act as an event marker. If the driver feels a stumble and presses the button 10–30 seconds later, the pre-buffer has to already contain the useful data. For data retrieval, the practical options would be a sealed service USB lead, Wi-Fi download, or a phone/cabin companion device. I would not expect the owner to remove the ECM-side module or work with raw files directly. The cloud or AI side would be for interpretation, not for capturing the event. The truck may have no connection when the issue happens, so the evidence has to be saved locally first. After that, cloud processing could help decode the data, compare it against baselines, and generate a readable report. For the first version, I would keep the automatic triggers conservative and objective: driver event marker bus-off error passive voltage drop / brownout device reset FIFO or queue overflow a normally periodic message disappearing side-to-side communication mismatch, if the topology supports that For “learning normal,” I agree with your point, but I would not want to overclaim it as automatic root-cause diagnosis at first. A realistic first step would be learned baseline comparison for that specific vehicle and operating condition. For example, a value would only be compared against similar conditions: RPM range load / MAP throttle position gear / vehicle speed coolant and oil temperature battery voltage AFM/DFM state, if decoded and validated Then the report could flag things like: this periodic message disappeared compared with its normal timing this value deviated from this vehicle’s normal range under similar conditions the same abnormal pattern repeated after the same type of event the anomaly occurred together with voltage, oil-pressure, misfire, or communication changes But I would still call that “abnormal pattern detected,” not “replace this part,” unless there is enough validated repair data behind it. So the intended product would not be “here is a huge log.” It would need to be an event package: what triggered the capture how much pre/post data was preserved what changed before and after the event whether the device itself reset, overflowed, or saw a bus error selected graphs around the event raw data only as supporting evidence From your perspective, what would make this kind of report useful instead of just another datalog? For example: What are the top 5 parameters or events you would want highlighted first? Would you trust a learned baseline for that specific vehicle, or would you prefer fixed thresholds? How much false-positive flagging would be acceptable before you stopped looking at the reports? What would a one-page report need to show for an independent shop to take it seriously? For misfire, AFM/DFM, oil pressure, or U-code complaints, what would you want the tool to flag automatically?
    • scotthvac.net
      2022-24 halogen - led grille swap

      By scotthvac.net · Posted

      2024 Silverado 2500 HD LTZ grille no camera Parts list   84603331 84913656 84913657 84913654 84913655 84911567 84911568 85646092 85646093 85797921 85797922   11570637  x10-15   grille/bumper bolts 11546500  x10      grille clips 11571006  x10      push/retainer clips 11546454  x6       nut retainers 11611609  x6       M5 bolts 11610700  x6       molding/trim retainers
    • davester
      Replacement Radiator

      By davester · Posted

      And use RA's 5% discount code if you buy from them.  google for the code, one is always available.
    • davester
      Turning radius

      By davester · Posted

      Just don't turn the steering wheel as much?
    • Snowcamo
      Replacement Radiator

      By Snowcamo · Posted

      Rockauto bud. I pass local stores for parts.   Findya something online. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...