Jump to content

Recommended Posts

Posted
 
I definitely will, I already have paid for it, won’t ship till December or January unfortunately. Where are you seeing exhaust for the 2.7 I can’t find it on AFE website. I would really be interested in a catless downpipe and also a bigger FMIC
 
If someone cracks the ECU for tuning we could run e85 and make some real power. Exhaust, intake and FMIC on e85 would easily make more power than a 6.2
 
Sent from my iPhone using Tapatalk
 
 
 


In your dreams! You’re assuming you can squeeze out at the least 110 hp more out of a 4 cylinder, lmao. You want a high performance motor, you start with a 420 hp 6.2 and go from there. I’ve personally easily beaten every truck that’s ever tried to race me and being lifted I’ve only got a SuperChips tuned 6.2 set on performance adding between 25-30 hp and that’s it, no exhaust or air intake, don’t embarrass yourself trying to take on a 6.2. You buy an economical motor for the sake of saving money, don’t throw your money away attempting to make it more than what it is, an economical means of transportation for hauling and light towing.


Sent from Above
Posted (edited)

I believe this thread is a darn good example of why we have different options with the engine's and trim levels.  Its your money,  spend it on what you want/need or can afford and be happy for those who pick something different instead of complaining about their decision

Edited by wizard4878
  • Like 1
Posted
I believe this thread is a darn good example of why we have different options with the engine's and trim levels.  Its your money,  spend it on what you want/need or can afford and be happy for those who pick something different instead of complaining about their decision


The 2.7 is a great little motor and it’s a “darn” good reason to stick with discussing the 2.7 options and stay within the parameters of reality and not fascinate on 6.2’s. Seems like every other discussion is about comparing or competing with the 6.2. Best to stick to reality and not throw ones money away but PLEASE don’t add a rice burner sounding exhaust on it, you’ll regret it down the road lol


Sent from Above
Posted


In your dreams! You’re assuming you can squeeze out at the least 110 hp more out of a 4 cylinder, lmao. You want a high performance motor, you start with a 420 hp 6.2 and go from there. I’ve personally easily beaten every truck that’s ever tried to race me and being lifted I’ve only got a SuperChips tuned 6.2 set on performance adding between 25-30 hp and that’s it, no exhaust or air intake, don’t embarrass yourself trying to take on a 6.2. You buy an economical motor for the sake of saving money, don’t throw your money away attempting to make it more than what it is, an economical means of transportation for hauling and light towing.

Sent from Above


First off, this is a truck, not a race car. Anyone “racing” a 5000lb truck is an idiot. You should educate yourself on boost, e85 etc. Plenty of 4 cylinders out there that mop the floor with V8s. I’m a V8 guy at heart, I have had a turbo Cobra, supercharged 5.0 coyote etc I’m not new to the game. We will just have to wait and see how this engine responds to mods. My 2018 WRX, which was a 2.0 made over 400 AWHP with full bolt ons. Stock it was rated at 264hp. So making an additional 100+ hp out of a factory boosted engine is not hard.




Sent from my iPhone using Tapatalk
Posted

 

The 2.7 is a great little motor and it’s a “darn” good reason to stick with discussing the 2.7 options and stay within the parameters of reality and not fascinate on 6.2’s. Seems like every other discussion is about comparing or competing with the 6.2. Best to stick to reality and not throw ones money away but PLEASE don’t add a rice burner sounding exhaust on it, you’ll regret it down the road lol

 

 

Sent from Above

 

No one is “fascinating” on the 6.2. It was merely an example or comparison that a modern boosted 4 cylinder can make V8 power. Now boost the V8 and it’s a different story obviously

 

 

Sent from my iPhone using Tapatalk

  • Like 1
Posted


First off, this is a truck, not a race car. Anyone “racing” a 5000lb truck is an idiot. You should educate yourself on boost, e85 etc. Plenty of 4 cylinders out there that mop the floor with V8s. I’m a V8 guy at heart, I have had a turbo Cobra, supercharged 5.0 coyote etc I’m not new to the game. We will just have to wait and see how this engine responds to mods. My 2018 WRX, which was a 2.0 made over 400 AWHP with full bolt ons. Stock it was rated at 264hp. So making an additional 100+ hp out of a factory boosted engine is not hard.




Sent from my iPhone using Tapatalk


Ummm, I thought we were talking about trucks? But, my slant nose would have spanked your little Subaru and sent you home with your tail between your legs but those days are long gone. The point I’ve made is “stick to reality” by the time someone is done investing so much into their addiction of even coming close to a 6.2 you could’ve spent the extra money on actually buying a 6.2. Besides, high chance you’ll break something along the way not to mention throw your warranty out the window


Sent from Above
Posted

I’ve been saying throughout this thread that he made a good financial choice but let’s not encourage him to take out a loan and break something along with voiding his warranty during the process.


Sent from Above

Posted

Personally, I believe he should first start leaving it stock and run a simple SuperChips tune on it, go from there where it’s very easy to adjust what needs adjusting and undo what’s been done, that’s “if” it’s even available


Sent from Above

  • Like 1
Posted


Ummm, I thought we were talking about trucks? But, my slant nose would have spanked your little Subaru and sent you home with your tail between your legs but those days are long gone. The point I’ve made is “stick to reality” by the time someone is done investing so much into their addiction of even coming close to a 6.2 you could’ve spent the extra money on actually buying a 6.2. Besides, high chance you’ll break something along the way not to mention throw your warranty out the window


Sent from Above


Lmao
We can play that game, my 750rwhp coyote would have spanked your “little slant nose” two times over. And yes those days are gone for me too unfortunately. Anyway, yes I see your point the 6.2 is clearly the better platform if it’s power your after. However I’m a gear head and I mess with everything I buy lol my only plans are to add the AFE Intake and maybe, and that’s a big maybe a down pipe, no catback or an annoying exhaust. But I won’t be doing any other mods this truck is my daily driver.

Back on track, besides superchips are there any other companies that mess with tuning. I would imagine HP Tuners would have something for the T1 in the works




Sent from my iPhone using Tapatalk
  • Like 1
Posted


Lmao
We can play that game, my 750rwhp coyote would have spanked your “little slant nose” two times over. And yes those days are gone for me too unfortunately. Anyway, yes I see your point the 6.2 is clearly the better platform if it’s power your after. However I’m a gear head and I mess with everything I buy lol my only plans are to add the AFE Intake and maybe, and that’s a big maybe a down pipe, no catback or an annoying exhaust. But I won’t be doing any other mods this truck is my daily driver.

Back on track, besides superchips are there any other companies that mess with tuning. I would imagine HP Tuners would have something for the T1 in the works




Sent from my iPhone using Tapatalk


Good question and based of what’s been going on around the forum, don’t think so


Sent from Above
Posted
37 minutes ago, TXGREEK said:

 


The 2.7 is a great little motor and it’s a “darn” good reason to stick with discussing the 2.7 options and stay within the parameters of reality and not fascinate on 6.2’s. Seems like every other discussion is about comparing or competing with the 6.2. Best to stick to reality and not throw ones money away but PLEASE don’t add a rice burner sounding exhaust on it, you’ll regret it down the road lol


Sent from Above

 

I have the 5.3 and wont change the exhaust because of it sounding like something other than a V8,  but to each their own,  if someone likes that sound I say go for it

  • Like 1
Posted

I wouldn’t count the little 2.7 out as far as performance goes. Hopefully it performs as well as the Ford 2.7. That motor in a F 150 crew cab 2wd ran the 1/4 in 14.2.  That motor in a crew cab 4wd Ranger with just a tune ran 8.8 in the 1/8th, which would be roughly a mid-high 13 1/4 mile, smoking any stock GM 6.2.  

Posted
I wouldn’t count the little 2.7 out as far as performance goes. Hopefully it performs as well as the Ford 2.7. That motor in a F 150 crew cab 2wd ran the 1/4 in 14.2.  That motor in a crew cab 4wd Ranger with just a tune ran 8.8 in the 1/8th, which would be roughly a mid-high 13 1/4 mile, smoking any stock GM 6.2.  


Good lord! Enough with the fascination with the 6.2’s lol


Sent from Above
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Anyone have any info about backorder time? It's classic 4th of July hot here in ohio.
    • There would be one way of determining the quality of the factory oil although probably more than a typical oil lab test, and that would be to draw out some oil from a new truck and send a sample to a lab that could do a more elaborate test of the oil. The issue with too little oil in the diff may not be the lack of lubrication of the diff bearings and gears themselves ( although a lack of oil volume for cooling ) but the wheel bearings because at some point the oil would be too low to properly get onto the spinning axle or fed along the axle tube. That was the claim by the local dealer from a couple of trucks in recent years that had the wheel bearings fail and they figured from lack of sufficient oil due to a severe underfilled diff and some of the bearing material made its way to the diff and it got damaged as well so the axle housings were just replaced on warranty. But your right that if the diff is over filled by whatever margin that it causes more churning of the oil than is desirable and that is no good either and can cause a pinion seal to leak. Also old oil I believe can tend to loose some of its properties like antifoaming and another good reason to change the diff oil every so often. 
    • I would be surprised if the diff's were not filled (with the cheapest gear lube) at the axle factory before being shipped to GM.  If you ever watched them building trucks they install the axles and all suspension parts with the frame upside down and then turn it over before its time to install the engine.     Too much gear lube in a axle can be worse than not enough especially with a lower quality GL where is get whipped up with entrained air (foam)  weakening its ability to lubricate.        
    • This is the 6.6 gasser section of the forum, you should either delete or modify your previous post as it is misleading for anyone looking for factual information on their 6.6 gas engine.
    • Well....I've done my first intake gasket. Probably wrong, but...we'll see?   Ultra black on the china walls and 1/4" up onto the sides of the intake gaskets. Permatex High Tack (couldn't find Gaskachinch) on the head side of the intake gasket. I read wrong and it says you're supposed to put it on the mating surface of the head, not the gasket. Hoping it's like a PB&J sandwich where it doesn't matter what side the PB goes on so long as there's jelly. That crap is messy/sticky and I got a dab or two on the intake port openings, tried to wipe it off. Hopefully it won't be a big deal and will only aid in sealing.   Per instructions I left the intake (top side) of the gasket dry except for a light smear of RTV around the coolant ports. Wiggling the intake in there was a bear but I had help to free me of surrounding wiring/stuff but I was basically able to set it straight down lined up with the bolt holes.   I did not think to wait until the RTV skinned over but there probably was 5-10 minutes while it sat before installing the intake.   Bolts finger tight first. Then, followed the Chilton's manual pattern to snug them to 15 lb-ft.   Waited a little over an hour, and then did the final torque in sequence again to 35 lb-ft.   Yesterday I replaced the fuel pressure regulator and got my new "nut and bolt kit" (fuel lines) installed. Damn GM used security torx on the spider, which I don't have, so I got scammed at the local HW store for an off-brand security Torx bit set.   The new driver's door mirror arrived yesterday, so, there's a chance this thing could be running and road legal tomorrow? I don't want to get my hopes up.   This will be my first time stabbing a distributor, too. Although, lucky me, someone else marked the old distributor for removal previously, I did see that. (Someone's been here before!!). Engine is still at TDC so it *should* be just a matter of transferring the mark to the new dizzy and rotating it into place.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...