Jump to content

Order Tracking?

6.2TB
 Share

Recommended Posts

6.2TB Enthusiast

6.2TB

Posted
Posted

Hello All,

i read the UAW contract was ratified by GM employees (narrowly) yesterday.  My order was placed in early October, but I haven’t tried to check it because...strike.   

 

Now that the strike is over, I am ready to start tracking like a bloodhound,  but need some help finding the trail. Lol

Searched the forum and cannot find any recent tracking tips.   Can someone please point me in the right direction?   Thanks in advance for your help!

redwngr Senior Enthusiast

redwngr

Posted
Posted
41 minutes ago, 6.2TB said:

Already tried that with no success, was hoping someone here had a different method.   Guess I should have mentioned that.   

Do you have your order number?

 

If not, you need to get it from your dealer. 

Then you can use gm chat to get the current 'event code' for your order. 

 

If you are in Canada, 'chat' won't give you any info -- you will need to get 'event code' updates from you dealer.

 

Understand that the system really isn't intended or designed to provide 'live' status of the order to the customer. 

Sometimes a little information is better than none -- and sometimes it just makes it more frustrating.

6.2TB Enthusiast

6.2TB

Posted
  • Author
Posted
7 hours ago, redwngr said:

Do you have your order number?

 

If not, you need to get it from your dealer. 

Then you can use gm chat to get the current 'event code' for your order. 

 

If you are in Canada, 'chat' won't give you any info -- you will need to get 'event code' updates from you dealer.

 

Understand that the system really isn't intended or designed to provide 'live' status of the order to the customer. 

Sometimes a little information is better than none -- and sometimes it just makes it more frustrating.

I do have my order number, thank you for the info, much appreciated!  Looks like the gmauthority site hasn’t been updating for over a month now.   

redwngr Senior Enthusiast

redwngr

Posted
Posted
3 hours ago, 6.2TB said:

I do have my order number, thank you for the info, much appreciated!  Looks like the gmauthority site hasn’t been updating for over a month now.   

If you're in the US,  gm chat will fix you up.

6.2TB Enthusiast

6.2TB

Posted
  • Author
Posted
On 10/26/2019 at 11:14 PM, redwngr said:

If you're in the US,  gm chat will fix you up.

Thanks again.  Chatted this morning, still no production date though?

2016 Sierra Owner Senior Enthusiast

2016 Sierra Owner

Posted
Posted

Going to take at least a week before they get things really cranking at the plants again. Machines that were running 24/7 don't like it when you shut down and restart them after sitting as long as the strike was.

  • 3 weeks later...
Z45 Senior Enthusiast

Z45

Posted
Posted (edited)

She did it for my GMC.  Any US dealer can check any order number, they just enter and it returns a status code only, nothing else.  Takes all of a few seconds.  I see her tracking Blazer's, HD2500's etc. 

 

 

·        1000 Order On Hold at Dealership

·        1100 Order Placed at Dealership, will not move unless dealer has allocation

·        2000 Order Accepted by GMAD

·        2001 Order Generated to Dealer

·        2005 Order Replaced with GM Prospect Order

·        2030 Order Edited by GM

·        2050 Order Changed

·        2500 Order preferenced  (“Picked Up”), Sent to Production Control

·        3000 Order Accepted by Production Control

·        3100 Order Available to Sequence (now becomes more stable)

·        3300 Order Selected and scheduled by Assembly Plant (Target Production Week usually available now)

·        3400 Order broadcasted (in the assembly plant production system), build process is underway and locked in sequence to the end of the line.

·        3450 Import vehicle produced

·        3550 Import vehicle shipped from Port of Origin via  boat

·        3750 Import vehicle received at Port of Entry

·        3800 Vehicle Produced, it’s come off the production line.  VIN now available.

·        4000 Vehicle Available to Ship

·        4104 Bailment Invoice Created (Shipping doc’s)

·        4B00 Bayed (“B”, not 8 ) Parked waiting on transportation

·        4D00 Bayed, Held for Quality Control (unknown time period)

·        4106 Bailment Released (Shipper in possession of vehicle)

·        4150 Vehicle Invoiced (Dealer Billed for vehicle)

·        4200 Vehicle Shipped (In Transit)

·        4300 Intermediate Delivery (Up-fitter etc)

·        4V03 Estimated Delivery Date

·        4800 Rail Ramp Unload, at the distribution center. Delivered by truck to dealer

·        5000 Vehicle Delivered to Dealer

·        6000 Vehicle Delivered to Customer (or dealer reported sale to GM)

·        9000 Order Cancelled

 

 

Edited by elcamino
  • 2 years later...
KVelec4326 Enthusiast

KVelec4326

Posted
Posted
On 4/8/2022 at 9:10 AM, bweiss said:

UPDATE ON ORDER BGJRKD

THANKS

According to chat: 

Congratulations! Your vehicle has been produced. It is important to know that shipping arrangements will take place next and your selling dealer is the best source for additional detail on that process.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • bwiese
      seat base height *lowering* (base 40/20/40 seat, 2026 1500 WT std cab)

      By bwiese · Posted

      Folks, Have a great new 2026 WT  (std cab, 2.7/4WD) w/base 40/20/40 mech adj bench "fake buckets"  (with lower and upper center console) heavy vinyl seats.  Overall the seats are very comfortable and the vinyl is heavy and appears less likely to 'split out'. Am very tall (6'5")  + a bad back/osteporosis/former hyperparathyroidism so ease/range of movement is a bit restricted.  The truck rides a bit high and I use a nerf step bar w/my left foot to step in, then I put right foot/leg in, drag my butt in  & get seated.  Worked fine in my 2018 RAM quadCab. But I end up dragging my butt over the left raised sidecushsion area of vinyl seat, and due to texture there's fair amount of traction on slide inward.  (ArmorAll didn't improve.) If the seat were even ~1/2" - 3/4" lower it'd be helpful, but base seats just have the forward/backward underseat bail and the side lever for tilt which really doesn't affect seat height.   I really don't want to 'de-puff' the left side sidecushion forming the  fake 'bucket'. I know one company sells 'seat elevator blocks':  but is there a simple way of lowering the height of the driver seat instead?   Thanks Bill W San Jose  
    • bwiese
      on-wheel cellphone control: 2026 1500 WT (2.7L 4WD std cab)

      By bwiese · Posted

      I have a basic 2026 1500 WT  (2.7L/4WD reg cab shorttbed). Comfy, generally happy with electronics/radio - but is there a way I can add switches to steering wheel right-side position (curr. empty) so I can adjust volume, push phone button to voice dial, etc? Bill W San Jose  
    • Tyler Gibbs
      Travel Trailer 2024 2500 HD 6.6 Gas Engine ?

      By Tyler Gibbs · Posted

      The curb weight on a 1 ton crew cab long bed is around 7k lbs.  Now, I don't know where you went to school but 9k is not more than 2x 7k lbs. More than 2x 7k lbs would be 14k+.   With that said, obviously yes you're going to feel a 9k lb trailer when slowing down.  I already said, when accelerating.  When changing lanes?  No.  But if you look at the context of what was quoted, the original person said, "after a mile or two..." which means that would be after the accelerating portion and you're driving a generally steady pace.  Please do learn to read and comprehend.
    • sFrank
      2026 Silverado Range AFM DFM ECU loaction

      By sFrank · Posted

      So I purchased the Range unit for my 2026 and I am seeing different locations suggested for the ECM . Can anyone confirm wither under hood, left side or right side or behind the wheelwell?
    • No F-bdy Bs
      Dave's Auto (custom engine builder) tear down of L8T

      By No F-bdy Bs · Posted

      Like I've said before. Di and Carbon buildup is not that big of a concern. Engine had minimal buildup, and that engine was obviously not super well maintained. Do regular oil changes, and you're gtg as long as the rest of the truck lasts. Also, the High Pressure FP that people ****** about, but can't tell you why.  Now, I wish they'd trash the variable oil pump. No real world issues with them, but I'll gladly eat whatever miniscule MPG it's saving me in favor of more oil at all RPMs.    Curious to see his assessment of the 7.3 compared to the 6.6. I expect he'll praise the port inj, but from a structural standpoint, the 6.6 is as robust as any engine out there.    Not to take away from the 7.3. I feel it's equally as good as the 6.6.     As to heat on the rear cyls, I'd have to see numerous examples before I'd say it's an issue. Especially not knowing the history of that engine. For all is known, they could have blown a rad hose, and ran it hot, and the 2 rear cyls may be the first to get hot in a low coolant situation, but not be an issue aside from that. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...