Jump to content

Quality tools options

Penguin VII

By Penguin VII
in Garage, Shop & Tools

 Share

Recommended Posts

Penguin VII Enthusiast

Penguin VII

Posted
Posted

Hey all,

 

I recently came across garagejournal while poking around looking at info for building a garage (which I hope to do in the next 2-3 years to start some bigger projects). Boy oh boy are those some opinionated folks over there. While I've got a lot more poking around to do I have been looking at a lot of the reviews for the new HF Icon line of tools, and everything looks real solid about them. I bought a torque wrench to replace my crappy Craftsman one and have been impressed with it's initial quality (time will tell how it holds up).

 

I know HF seemed to have exclusively garbage in the past but seem to have really turned things around in the past few years with many more quality items. I'm curious to know what tool brand you would all recommend. I refuse to spend money on Snap-On/Mac/etc. I just don't use them for a living and can't justify the cost. I've been bitten a few times by Husky and Kobalt (although maybe they have turned around in recent years as well) and Craftsman is pretty much dead to me.

 

I'm not looking for used tools because I don't want to go through the hassle of QCing everything and worrying about where to find X or Y, I'd rather just buy new and preferably from the same spot, but I don't need everything matching, just makes life simpler.

 

Anyway, what are everyones thoughts here? People still live by Craftsman? Snap-On or nothing? What is your recommendation for solid middle of the road tools?

RyanbabZ71 Senior Enthusiast

RyanbabZ71

Posted
Posted

Lots of craftsman and some kobalt. Also have a bunch of gear wrench brand sets of tools


Ryan B.

tbarn Senior Enthusiast

tbarn

Posted
Posted

Most of the brands are OK for a DIY'r. Mine are mostly Snap On, Mac and OLD Craftsman. Newer Craftsman are not nearly as good as the older ones. A lot of the time you will find that the socket wall on cheaper sockets will be much thicker because of cheaper steel. OK except it creates problems fitting in tight spaces.

Penguin VII Enthusiast

Penguin VII

Posted
  • Author
Posted
9 hours ago, tbarn said:

Most of the brands are OK for a DIY'r. Mine are mostly Snap On, Mac and OLD Craftsman. Newer Craftsman are not nearly as good as the older ones. A lot of the time you will find that the socket wall on cheaper sockets will be much thicker because of cheaper steel. OK except it creates problems fitting in tight spaces.

I've noticed that my Craftsman sockets have started to have a higher chance to round bolts. I wasn't sure why initially but I'm starting to think that the sockets are just cheap which is causing them to extend past the original sizes. I need to get a spec and measure to get a better sense of this but it's partly what started me looking at new tools.

diyer2 Senior Enthusiast

diyer2

Posted
Posted

I think Craftsman was bought by Snap On.

No more free tool exchange I believe.

I have old Craftsman, Kobalt, Mac and Gear Wrench.

My son is a mechanic and owns over $15 K of Snap On tools.

There is a quality difference with pro tools.

 

Not worth the money IMO for the DIY guy.

Buy cost effective tools and replace when needed.

I had a Kobalt tool fail. My fault.

Took it to the store and they gave me a new one.

 

:)

 

tbarn Senior Enthusiast

tbarn

Posted
Posted (edited)

Craftsman is a Stanley/Black and Decker company. Also own Mac tools.

Edited by tbarn
RyanbabZ71 Senior Enthusiast

RyanbabZ71

Posted
Posted
I think Craftsman was bought by Snap On.

No more free tool exchange I believe.

I have old Craftsman, Kobalt, Mac and Gear Wrench.

My son is a mechanic and owns over $15 K of Snap On tools.

There is a quality difference with pro tools.

 

Not worth the money IMO for the DIY guy.

Buy cost effective tools and replace when needed.

I had a Kobalt tool fail. My fault.

Took it to the store and they gave me a new one.

 

[emoji4]

 

 

You can still exchange broken craftsman tools. Ace hardware, Lowe’s and menards all currently carry craftsman

 

 

Ryan B.

Penguin VII Enthusiast

Penguin VII

Posted
  • Author
Posted
1 hour ago, RyanbabZ71 said:

 

You can still exchange broken craftsman tools. Ace hardware, Lowe’s and menards all currently carry craftsman

 

 

Ryan B.

I was told by my local Lowes that you can only exchange Craftsman tools purchased there.

captadamnj Enthusiast

captadamnj

Posted
Posted

Started picking up some cordless tools not too long ago...after looking at the Craftsman, Dewalt, Makita and Milwaukee, I settled on Milwaukee M12 platform.  Have an impact driver, impact wrench, ratchet, angle drill and some lights in inventory so far.  Went M12 over M18 as I just couldn't justify the added weight and battery cost for mostly hobbyist type work.  Have been very impressed with battery life so far, have never had an issue with a job I couldn't handle.  The M12 3/8 impact handles lug nuts on my HD no problem.  With the hex bit drill bit set, haven't found a need for a regular drill as the combination of the angle drill and the impact driver have done everything I wanted them to do.  All in all, very pleased.  And endless more options out there.  Suspect will add a circular saw and sawzall next, may put the rotary tool on holiday wish list to get myself uncorded from that tool, as well.  So far so good.

Penguin VII Enthusiast

Penguin VII

Posted
  • Author
Posted
2 hours ago, captadamnj said:

Started picking up some cordless tools not too long ago...after looking at the Craftsman, Dewalt, Makita and Milwaukee, I settled on Milwaukee M12 platform.  Have an impact driver, impact wrench, ratchet, angle drill and some lights in inventory so far.  Went M12 over M18 as I just couldn't justify the added weight and battery cost for mostly hobbyist type work.  Have been very impressed with battery life so far, have never had an issue with a job I couldn't handle.  The M12 3/8 impact handles lug nuts on my HD no problem.  With the hex bit drill bit set, haven't found a need for a regular drill as the combination of the angle drill and the impact driver have done everything I wanted them to do.  All in all, very pleased.  And endless more options out there.  Suspect will add a circular saw and sawzall next, may put the rotary tool on holiday wish list to get myself uncorded from that tool, as well.  So far so good.

I've got the M18, have been pretty impressed with it, although I've noticed that the orbital sander chews through the smaller batteries, but the larger one lasts forever. Pretty happy with the Milwaukee line of tools in the few years I've had them honestly.

  • 2 months later...
L86 All Terrain Senior Enthusiast

L86 All Terrain

Posted
Posted

I have good luck with Westward tools. You may not be able to get them in the US, we get them through Acklands Granger in Canada. They are Taiwanese made so they are great quality tools at affordable prices. Great for a DIY'er. Stanley isn't too bad either for socket sets. Wrenches: Jet Tool, Grey Tools Canada, Proto, Mac, Sunex, Mastercraft (Canadian tire Chinese) for beater wrenches or truck sets. We have the Snap On truck that comes by once a week, but you're paying 500% cost. I bought a trouble light from them to help support the truck, I figured about $50, the invoice was $167 haha never again. They sell CKRT knives with a Snap On logo for twice the price as the CRKT knife, which are both garbage btw. 

  • 1 year later...
  • 1 year later...
Spurshot Senior Enthusiast

Spurshot

Posted
Posted

Old thread, but always relevant.  Like most of you, I have a mix.  Some Snap-On, Craftsman, etc.  

 

I've had a combination end wrench set from Tekton for a couple years now.  I'd say the fit on fasteners and finish of the wrenches are on par with any of the best.  I can highly recommend Tekton. 

 

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      While waiting for parts I have been working on installing the AC compressor, new accumulator, and orifice tube. Also changed out the high side ball valve (original). The orifice tube that was in there wasn't too bad. Slightly dirty, a little bit of junk, but not blocked. Glad I changed it out.   The accumulator, which should have been a 5 minute job, may have just burned $50. Put some PAG in it, wrote the date and mileage on the side, fresh o-rings and gooey'd up the threads and rings with Nylog. Got everything connected and snugged and was going to vacuum down the system, and....   My manifold gauge won't fit on the port. It's not an R12 service port. It LOOKS like an R134 service port but the diameter is a hair too large. There's a sticker on the accumulator that says it's designed to be used with R12 and R134a systems only. So it's not R1234yf. Even if I reduced the diameter slightly with a file, the shoulder on the port is too large so the quick-connect valve won't lock on. I'm stumped. It's going back, and 50/50 on if they'll give me a refund.   Also, I did a fuel pressure test.... Key on, the gauge spikes to about 60psi and quickly bleeds off, like 2psi per second. The fuel isn't going into the plenum, no smell, starts fine, so I'm guessing there's a bad check valve in the pump and the fuel is just draining back into the tank. oh, hell. But, it shouldn't be a problem, pump primes just fine and the truck starts right up. It just means I can't really ever use fuel pressure to verify a leak at the injector or intake.
    • No F-bdy Bs
      SERCICE ESC message?

      By No F-bdy Bs · Posted

      Got this yesterday out of nowhere. Truck is a 25',6.6 gasser with 8k miles.  Only semi anomaly is that the truck had been sitting, uncranked for 6 days. Elec Stability Control showed immediately upon cranking, not while driving. No drivability issues, just the message. Battery didn't seem to be weak when cranking over.  I drove it, killed it, let it sit a few hrs with no avail.  Truck is 100% stock. No damage. 
    • newdude
      on-wheel cellphone control: 2026 1500 WT (2.7L 4WD std cab)

      By newdude · Posted

      This can be done.  It is not cheap and requires an instrument cluster swap with custom programming, new steering wheel with the controls on it, and a special jumper harness.   The cluster upgrade - 12.3” Digital Cluster Upgrade – 2022.5–2026 Silverado / Sierra (T1 Refresh Pickup) - WAMS   The wheel upgrade - Steering Wheel Upgrade Kit – 2022.5–2026 Silverado / Sierra (T1 Refresh Pickup) - WAMS   The column harness upgrade - 2019 - 2026 Silverado / Sierra: Steering Wheel LIN Bus Harness - Harness Dr. - DIY Done Right     The problem with doing all of this?  You pretty much can't have any programming done to your truck that involves the cluster ever again.  The dealer won't be able to program the cluster as GM's system will only pull data for the cluster the truck came with.  So it would be advised also to turn off over the air updates.   TLDR;  Should have bought an LT double cab?  You'd have a power seat, the wheel controls, the cluster, all things that you've been seeking in your various posts so far about your new WT regular cab.  
    • dna9656
      New to Me 2010 SLE (Quirks, Issues)

      By dna9656 · Posted

      I was unaware of that, thanks for updating me.
    • newdude
      2026 TurboMax L3B 2.7L: AFM/DFM present/disablable? [2026 Silverado 1500WT: 4WD RC RB 2.7L]3GCNKAEK9TG345558

      By newdude · Posted

      Yes.  The 2.7 Turbomax has Active Fuel Management.  It is NOT the same as the V8s.  Totally different system.     Here is an article from GM when the 2.7 came out explaining the cylinder deactivation and the valve lift system.  Starts at the section called "SCS Valvetrain":   New Turbocharged 2.7L 4-Cylinder Engine Powers Full-Size Trucks – TechLink         This is an internet myth going around.  It was alleged that some 5.3s had this mystical 8th digit of the VIN as an "E" which somehow meant it had a new one year only 5.3 that didn't have DFM.  The writer of said article and the person that made the claim conveniently can't count because they posted the VIN.  The 8th digit was a "D" which meant its still the 5.3 with DFM.  The 9th digit of the VIN was an "E" and the 9th digit isn't the engine code.  At all.  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...