Jump to content

Door handle push to unlock not working

Dambes
 Share

Recommended Posts

Dambes Enthusiast

Dambes

Posted
Posted

I have a 2019 Sierra elevation crew cab and it came with those buttons on the outside door handle to lock/unlock the truck if you have the fob on you. These work on every door except the passenger rear. Wondering if anyone else has had this issue? I find it wierd it works on the driver side rear but not the other side. 

tbare54 Enthusiast

tbare54

Posted
Posted

Check that the safety lock on the door frame has not been moved to the lock position.


Sent from my iPhone using Tapatalk

BlancoSilverado Enthusiast

BlancoSilverado

Posted
Posted
5 hours ago, tbare54 said:

Check that the safety lock on the door frame has not been moved to the lock position.


Sent from my iPhone using Tapatalk

That shouldnt make a difference unless your in the truck. 

 

If 3 of the 4 same features worked. probably a wire/switch issue.

 

One test is to stand by the passenger front door and lean over and try to unlock using the rear door button. then stand at the rear door and try using the front door button.(all on the passenger side). if it does work on the rear but on the front you need to take it in at that point.  

Dambes Enthusiast

Dambes

Posted
  • Author
Posted
4 hours ago, BlancoSilverado said:

That shouldnt make a difference unless your in the truck. 

 

If 3 of the 4 same features worked. probably a wire/switch issue.

 

One test is to stand by the passenger front door and lean over and try to unlock using the rear door button. then stand at the rear door and try using the front door button.(all on the passenger side). if it does work on the rear but on the front you need to take it in at that point.  

Tried that after work, rear door wont unlock when I'm close to the front but the front door will unlock when I'm close to the rear. Guess ill be calling the dealer tomorrow, pain to deal with on a week old truck.

  • 2 weeks later...
Dnt Senior Enthusiast

Dnt

Posted
Posted

I was wondering what those little buttons did on the door handles. That is cool I will check it out tomorrow..............................  

cleanarcs New Member

cleanarcs

Posted
Posted

Same issue on my 2020 Elevation. Same door to. On mine the lock indicator is not popping up all the way. It gets stuck. I think the button on the outside of the door is working properly the alignment of indicator needs to adjusted. 

 

We’re you able to get yours fixed? I’m planning to drop mine off at the dealer in the next couple weeks. 

Dambes Enthusiast

Dambes

Posted
  • Author
Posted
9 hours ago, cleanarcs said:

Same issue on my 2020 Elevation. Same door to. On mine the lock indicator is not popping up all the way. It gets stuck. I think the button on the outside of the door is working properly the alignment of indicator needs to adjusted. 

 

We’re you able to get yours fixed? I’m planning to drop mine off at the dealer in the next couple weeks. 

Haven't had it in yet unfortunately. The dealer i bought it from is 2 hours away from me so i booked it into my local dealership begining of January. Hoping for an easy fix. 

Race Neely Enthusiast

Race Neely

Posted
Posted

I know on my wife’s equinox, the in cold ( below 30) they start sticking and acting up on certain doors... i haven’t had the dealer look at it. 

  • 2 weeks later...
Dambes Enthusiast

Dambes

Posted
  • Author
Posted

Turned out the window was rubbing on the passive door lock module and somehow ended up unplugging the harness. Service manager said he had never seen anything like that before and took some pictures to send to GM since it is a new truck. Pretty easy and quick fix, hope this helps if anyone else has this issue!

  • 2 years later...
Road-King New Member

Road-King

Posted
Posted

I have a 2019 Denali and just noticed today that all 3 buttons don't work. Driver door and driver back passenger door don't work, passenger front not working.  The only one that does work is the passenger back door on the other side,  not helpful. 

shanemoon Enthusiast

shanemoon

Posted
Posted
On 1/6/2022 at 6:14 PM, Road-King said:

I have a 2019 Denali and just noticed today that all 3 buttons don't work. Driver door and driver back passenger door don't work, passenger front not working.  The only one that does work is the passenger back door on the other side,  not helpful. 

Lol that's sad but also kinda comical. Like someone played a bad joke on you.

Made me laugh.

  • 2 years later...
smcgowan11 New Member

smcgowan11

Posted
Posted
On 1/6/2022 at 6:14 PM, Road-King said:

I have a 2019 Denali and just noticed today that all 3 buttons don't work. Driver door and driver back passenger door don't work, passenger front not working.  The only one that does work is the passenger back door on the other side,  not helpful. 

For anyone having a similar issue, this is what I did to fix my problem when it was isolated to one side or just one door. 

2019 GMC Sierra 1500 Passive Door Unlock Not Working! 2019-2022 Multiple Fixes!

 

  • 1 year later...
MarkH12 New Member

MarkH12

Posted
Posted

Thanks I was trying to do my tpms for my tire sensors and deactivated so I just held the lock unlock buttons and it reset 

redwngr Senior Enthusiast

redwngr

Posted
Posted

Keyless access can be disabled -- either on purpose OR accidentally.

On the remote, press the lock and unlock buttons at the same time -- for about 3 seconds -- and the lights will flash to acknowledge.

 

4 flashes indicates it has been disabled

2 flashes indicates it has been enabled.

 

 

image.png.fd60ea1aff8aba617e159a1ebe1d7715.png

image.png.8641a939231c6a5e796ca6acb8390a33.png

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • asilverblazer
      Another 6.2L engine failure!

      By asilverblazer · Posted

      My take: I don't think seeing up to 200k on the odometer of any of these engines/trucks (2014-to present) is surprising. (Excluding the known DEFECTS, specifically, the 6.2 main/connecting rod bearing issues, the defective lifters, alternatively parts that a recall was issued for - I think there were three.)   250K is my line in the sand, anything over that is 'surprising', but not limited to the engine making it that far but including the truck surrounding it too. (We've talked about this in other posts, why I think the engine isn't the deciding factor for ultimate mileage.)
    • asilverblazer
      Another 6.2L engine failure!

      By asilverblazer · Posted

      I included the first gen-cylinder de-activation (active fuel management) in my statement.
    • No1UKnow
      Transmission Woes :-(

      By No1UKnow · Posted

      Hello All!   My 2019 Colorado 3.6 LT, 4WD Crew Cab has approximately 77,500 miles and I recently began experiencing the well-known transmission shudder between about 30 and 65 mph. The problem had worsened to the point that I could no longer attribute it to road conditions - and I had decided to bring the truck to the dealer - when recently, I experienced a sudden loss of power while driving at maybe 40 MPH. Several warning lights flashed, the “Check Stabilitrack” message appeared, and the Check Engine, Stabilitrack, and Traction Control icons remained illuminated. The truck regained driving power, but it stayed in a low gear with unusually high RPMs for the speed. (limp mode?) Because I was only about two miles from home, driving slowly, I was able to make it back and run an OBD-II scan, which showed fault codes U0101, P0700, and U0100. My next trip in the truck was to drive it to the dealer the following day. That trip began normally, but after about a mile I experienced another loss of power, along with the same warning lights and the same “Check Stabilitrack” message. As before the truck remained driveable, but again operated at an abnormally high RPM-to-speed ratio and seemed stuck in a single gear. About a mile later, the dashboard lit up once more, this time displaying “Check 4WD.” Soon after that, I arrived at the dealer. I have verified that the truck still has its original factory transmission fluid, which means it has never received the corrective fluid exchange outlined in GM Technical Service Bulletin #18-NA-355.  That was Thursday of last week and I've heard nothing yet from the dealer.    According to Technical Service Bulletin #18-NA-355 and the build date of my truck, my truck should have the newer LV fluid. I've done a little research and read something about a problem with the wiring harness as well.   Anyone have an insights into this situation?  Thank you!!
    • GMCustomerService
      Damaged Left Rear Bumper & Left Rear Quarter Panel - Repair Questions

      By GMCustomerService · Posted

      Having bumper and other body damages can be very frustrating, especially as a result of a parking lot collision/bump. Our team wants to learn more about the damages to your truck so we can look into ways we might be able to help. When you get the chance, please fill out our support form with more details: https://s.gmc.com/support-request . A member of our team will follow up with you as soon as next available. We want to get you enjoying your truck to the fullest again. 
    • PhilB
      Gas Prices

      By PhilB · Posted

      Did you even read this article?   Even the title of the article says "U.S.-Iran Deal Doesn’t Mean a Swift Return of Oil and Gas Flows"   Remember, crude oil prices are based on FUTURE purchases by the oil companies.  Gas prices are based on FUTURE purchases by the station.  This article stated that many of the oil producing nations have to restart their processes to get the oil produced.  Then the oil has to be shipped to wherever.  And it doesn't get there overnight.  And most of that oil is not coming here. Check out this site:  https://afdc.energy.gov/data/10621   A graph will pop up to show where the US imports their oil from.  Notice that there isn't a lot of import from OPEC and Iraq.  Most of the US import comes from Canada. The US oil produces are selling their oil on the open market, which is why the US fuel costs went up.  So you're correct, the US oil companies are going to slow walk the price downward.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...