Jump to content

De-chroming a 2020 Denali

Jonofmac
 Share

Recommended Posts

nobaddays Enthusiast

nobaddays

Posted
Posted
On 8/4/2020 at 1:06 AM, Jeffrey Soulages said:

Did you notice when you were installing your grill if the outside trim was able to separate? I am thinking of buying the same grill for my AT4, but only want the insert. I'd like to re-attach it to the original trim piece as it is the body color (white). 

 

Thanks 

 

J

All of the aftermarket Denali grilles in black that I have seen are 1 piece. I went through this same process on my 2018 Denali, and ended up having to tape off and paint the surround to match my truck, keeping the center black. I love the Denali grille, and I would put one on my AT4 if you could just get the insert.

 

My 2018 also required me to pull the front bumper in order to change out the tow hooks and skid plate to black ones. They definitely don't make it easy!

  • Replies 70
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

Jonofmac
Jonofmac

Upper piece is installed. I've been trying for 45 minutes to remove the lower chrome piece without removing the bumper. I'm convinced it is not possible.    This is frustrating that I have t

Jonofmac
Jonofmac

Honestly the hardest part is just that I've never done it before for this truck and theres no instructions. I recorded some video clips and I'll make a DIY video for the upper part. Luckily the bumper

Jonofmac
Jonofmac

Sorry I haven't been able to work on this much recently, weather has not been cooperating.   I finally got around to making the DIY video on how to remove the front grill.   

Posted Images

204Denali Enthusiast

204Denali

Posted
Posted
1 hour ago, BIGDOGx said:

Love the chrome delete, wish gm would realize that taste change and chrome is no longer the desired upper end finish most want. It is why the at-4 and even all terrain models of the older k series trucks are far more popular and in demand vs. the denali package, i would guess that a large majority denali owners were those looking for an at-4 but settled for the denali instead because they got a decent deal.

Maybe a rarity then, I always knew I was getting a Denali, never had any intentions of getting an AT4, just did not interest me.  Some of the parts though I would gladly have swapped over to get rid of some of the chrome though.

204Denali Enthusiast

204Denali

Posted
Posted
1 hour ago, hotrodz37 said:

.

Has anyone gotten any quotes on color matching (or blacking out) the grille, door handles, vents and trim yet?


Sent from my iPhone using Tapatalk

 

I ended up doing the work myself, painted out the grille surround (left grille insert chrome), fog surrounds, mirror caps, 3rd brake light, emblems.  I haven't gotten to window trim or handles yet, cannot decide what I want to do (paint vs. vinyl vs. swap parts)

 

I never got any paint quotes yet, but I did have a guy quote me on the vinyl before, and it was roughly $400 Cdn to do the grille, fog surrounds, fender vents, door handles and skid plate.

  • Like 1
hotrodz37 Senior Enthusiast

hotrodz37

Posted
Posted
 
I ended up doing the work myself, painted out the grille surround (left grille insert chrome), fog surrounds, mirror caps, 3rd brake light, emblems.  I haven't gotten to window trim or handles yet, cannot decide what I want to do (paint vs. vinyl vs. swap parts)
 
I never got any paint quotes yet, but I did have a guy quote me on the vinyl before, and it was roughly $400 Cdn to do the grille, fog surrounds, fender vents, door handles and skid plate.

That seems like a pretty good deal to me. I’m going to do some shopping on getting all those pieces done and then I can just swap the grille out to the black one.

Wondering how long a good vinyl job lasts these days. Or I guess a lot of shops probably have a guarentee of some kind.


Sent from my iPhone using Tapatalk
204Denali Enthusiast

204Denali

Posted
Posted
19 minutes ago, hotrodz37 said:


That seems like a pretty good deal to me. I’m going to do some shopping on getting all those pieces done and then I can just swap the grille out to the black one.

Wondering how long a good vinyl job lasts these days. Or I guess a lot of shops probably have a guarentee of some kind.


Sent from my iPhone using Tapatalk

Vinyl holds up really well from my experience, and my paint guys tells me the same.  I have him shopping for a set of handles for me to paint so I can throw them on my truck.  Hopefully he can find a set that come unfinished and then I know they will hold up well, paint the chrome handles I'm not sure will hold up with the amount of abuse they receive.  Time would tell I guess.

  • 3 weeks later...
204Denali Enthusiast

204Denali

Posted
Posted (edited)

Thought I’d add my version of de-Chroming and the progress I am making. I’m still waiting on my vinyl guy to fit me In sometime over the next couple months here to do my handles and fender badge, but otherwise I’ve made some good progress so far on my Denali I think  

967C8DED-9265-4777-ACBA-E0AB0D99C305.jpeg

CE9A1B9D-C0AA-47F0-8EB2-908A984950CE.jpeg

Edited by 204Denali
  • Like 1
Jonofmac Enthusiast

Jonofmac

Posted
  • Author
Posted

That looks great. What did you end up doing to the front grill?

 

Edit: saw you painted it yourself. Looks good.

 

Wish I were motivated but I've got my track car Corvette, a Volvo I rebuilt the engine and trans on and currently re assembling into car, and a RX8 project car for the wife keeping me busy. The truck has just been driven to tow the other cars haha

 

Sent from my SM-N960U using Tapatalk

 

 

 

 

204Denali Enthusiast

204Denali

Posted
Posted
53 minutes ago, Jonofmac said:

That looks great. What did you end up doing to the front grill?

 

Edit: saw you painted it yourself. Looks good.

 

Wish I were motivated but I've got my track car Corvette, a Volvo I rebuilt the engine and trans on and currently re assembling into car, and a RX8 project car for the wife keeping me busy. The truck has just been driven to tow the other cars haha

 

Sent from my SM-N960U using Tapatalk

 

 

 

 

Yeah I ended up painting the surround, dog surrounds and skid plate. The aftermarket grilles I did not like and didn’t mind keeping the mesh part chrome.  I contemplated Painting it or vinyl wrapping the mesh? but the more I researched It the more it seemed like a bad idea. 
 

lol I don’t blame you, and that’s funny, I’m only doing this since I have time right now, I’m currently looking for a corvette for a new project car and need to get the wife a new car shortly, so when either those happen my truck time will be zero lol. Hoping to get the exhaust done before winter but that’s looking doubtful. 

DenaliDave Enthusiast

DenaliDave

Posted
Posted
5 hours ago, 204Denali said:

Thought I’d add my version of de-Chroming and the progress I am making. I’m still waiting on my vinyl guy to fit me In sometime over the next couple months here to do my handles and fender badge, but otherwise I’ve made some good progress so far on my Denali I think

 

Looks great!  I’ve got the same truck, black Denali.

 

Did you use an etch primer before you shot the black?  If this was this done with a rattle can, eg spray paint, what brand did you use?

204Denali Enthusiast

204Denali

Posted
Posted (edited)
10 hours ago, DenaliDave said:

Looks great!  I’ve got the same truck, black Denali.

 

Did you use an etch primer before you shot the black?  If this was this done with a rattle can, eg spray paint, what brand did you use?

Process used was to sand, adhesion promoter, etch primer, paint and K1 clearcoat.  Paint was supplied by local autobody paint distributor, so I did use a rattle can but not off the shelf products found just anywhere.  I'm from Canada so my supplier is Rondex, but I'm sure you could find an equivalent for yourself locally as well.

 

Edit: Forgot to mention the key is prep work, and ensuring you sand between coats as well.  If do not do the prep, it will never work, especially in such a high chip factor area as the front bumper.

Edited by 204Denali
DenaliDave Enthusiast

DenaliDave

Posted
Posted
3 hours ago, 204Denali said:

Process used was to sand, adhesion promoter, etch primer, paint and K1 clearcoat.  Paint was supplied by local autobody paint distributor, so I did use a rattle can but not off the shelf products found just anywhere.  I'm from Canada so my supplier is Rondex, but I'm sure you could find an equivalent for yourself locally as well.

 

Edit: Forgot to mention the key is prep work, and ensuring you sand between coats as well.  If do not do the prep, it will never work, especially in such a high chip factor area as the front bumper.

Thanks for the details! I really appreciate it. I really like the look you created by blacking out the grille surround while keep the center chromed, along with the other blacked out bits. 

204Denali Enthusiast

204Denali

Posted
Posted
37 minutes ago, DenaliDave said:

Thanks for the details! I really appreciate it. I really like the look you created by blacking out the grille surround while keep the center chromed, along with the other blacked out bits. 

No problem.  appreciate compliment.  Don't know why GMC doesn't have a similar package they offer, but same time I dont mind making it look how I want my way either.  Only the vinyl left to go and exhaust then I'm done with mods, well also new wheels come next spring (I've got winter coming) then I'll be officially done.

Landry Enthusiast

Landry

Posted
Posted

Got the black grill and now just waiting for it to cool down to do the window trim and the door handles.  Anyone have the tri-mode power running boards with the chrome strip on them?  Wondering what you have done with those to remove the chrome.

204Denali Enthusiast

204Denali

Posted
Posted
24 minutes ago, Landry said:

Got the black grill and now just waiting for it to cool down to do the window trim and the door handles.  Anyone have the tri-mode power running boards with the chrome strip on them?  Wondering what you have done with those to remove the chrome.

Take a look at my pics, mine are done, Chrome is gone. Either wrap them or even plasti dip them. Don’t paint them. Won’t last, it’s a high chip area. Probably why they come with the fake chrome. 

DenaliDave Enthusiast

DenaliDave

Posted
Posted
15 hours ago, Landry said:

Got the black grill and now just waiting for it to cool down to do the window trim and the door handles.  Anyone have the tri-mode power running boards with the chrome strip on them?  Wondering what you have done with those to remove the chrome.

 

I remember seeing a post in the forums where the chrome strip was removed. Believe it was heated with a heat gun and “peeled” off. Not sure if I’d recommend that. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Jake87
      2027 GMC Sierra: Official Discussion

      By Jake87 · Posted

      I hope to high heaven this is wrong. My Chevy farm trucks frame is lasting way longer than a newer Nissan Titan XD I got for a steal, and it only pulls trailers. A decade younger and it's frame is already way rustier than the waxed Chevy I drive across longs and ditches. Also, hasn't Ford been having tones of troubles with rusted frames? 
    • Coastie05
      2027 GMC Sierra: Official Discussion

      By Coastie05 · Posted

      Batteries don’t always show signs of a few years ago my vehicle started fine in the morning and took me to work. After work the battery was completely dead and I needed a jump. No, I didn’t leave anything on and the battery was only a couple months old. It was replaced under warranty. 
    • Jake87
      2027 GMC Sierra: Official Discussion

      By Jake87 · Posted

      AFM is confirmed in the Corvette engine, so I'm assuming the higher volume trucks will get it as well
    • NDKoze
      2027 GMC Sierra: Official Discussion

      By NDKoze · Posted

      If his battery was that bad I would think it would have been showing signs before this that were ignored. Stinks that it happened the way it did in rush hour traffic, but this seems like a pretty fringe scenario. I don't mind it that bad and never turn it off. The only slight annoyance for me is the slight delay between brake to gas, but I have gotten used to it and figure if it can save a little gas why not.
    • bluev8
      Intermittent no-code issues on 2022.5+ V8 trucks — what did the shop fail to capture?

      By bluev8 · Posted

      That is a good correction. I think “severity” was probably the wrong word for what I meant. What I really mean is closer to event priority, relevance, and actionability — not “this code is severe” or “replace this part.” I agree that a truck can have a lot of trivial or historical communication codes, and if the product starts pushing alerts for every stored or low-value event, people will ignore it very quickly. So the alert logic would need to be filtered. For example, I would not want a random old communication code to generate a push notification by itself. A useful alert would probably need to be based on things like: - new vs historical - active vs stored - repeated vs one-time - duration of the event - whether it happened near the driver-marked symptom - whether it happened together with voltage drop, reset, bus-off, misfire, oil-pressure change, etc. - whether the same pattern repeats under similar conditions So instead of saying “severity,” maybe the product should organize events by affected system and priority. For example: Misfire event: Show misfire counts / roughness first, then fuel trims, RPM/load, DFM/AFM state if available, coolant/oil temp, voltage, and related DTCs. Oil-pressure event: Show oil pressure first, but only in context — RPM, load, oil temperature, coolant temperature, DFM/AFM state if available, voltage, and baseline comparison. Communication event: Show which module/network/message dropped, whether voltage dropped, whether the recorder reset, whether it was active or historical, and whether it repeated. Voltage/reset event: Show battery voltage, crank/wake/sleep state, module reset, communication dropouts, and what came back online first. That also solves the display-order problem you mentioned. The main report should not always show the same fixed list first. It should show the system that appears abnormal first, and then the supporting values for that system. I also agree that the truck already has an oil pressure gauge and MIL. The point would not be to duplicate those. The value would be in showing what else was happening before and after the warning or symptom. For example, if the MIL comes on for a misfire, the truck already told the driver there is a problem. The useful part would be: - which cylinder or bank looked abnormal first - whether it happened after an AFM/DFM transition - whether fuel trims were already moving - whether oil pressure or voltage changed at the same time - whether the same pattern happened previously without a MIL On the OBD port point, I think you may be right for a consumer-facing version. OBD is much easier for the average owner: - easier install - easier removal - inside the cabin - easier phone connection - easier data download - easier to include a pass-through port for another scanner OBD is also the right place for DTCs, freeze frame, VIN, calibration information, Mode 6, and normal scan-tool parameters. The reason I was looking at ECM-side recording is that some events may be gone by the time someone plugs in a scanner, and some powertrain-side network evidence may not be available the same way through the DLC. But I agree that if an OBD-based version can capture enough useful evidence for most owners, that is probably the cleaner consumer product. Maybe the split is: - OBD/DLC version for most consumers - ECM-side version only if it proves it adds evidence that the OBD version cannot get - shop/pro version if deeper powertrain-side event evidence is actually useful So I would not want to force the inline approach if the OBD workflow solves most of the real-world problem. Your last point is probably the key product requirement: the report should be specific to the system showing the abnormality. Not “here are 50 parameters.” More like: “Misfire-related event detected. Here are the misfire/fuel/DFM/context values.” or “Oil-pressure-related event detected. Here is oil pressure compared with RPM/load/temp/baseline.” or “Communication event detected. Here is what dropped, when, and whether voltage/reset happened first.” That is a much better way to think about the report.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...